Archive

suma · 27 January 2011, 04:33:02

Hi, if the channel is not third-party and can be opened with the card available, we'll add it.

suma · 27 January 2011, 09:20:47

Added

alihasan · 27 January 2011, 13:51:26

Thank you. It will start working tommorrow, right? Cos now I have:

Quote11:40:52.918 - Can't find: CAID 0d02, IDENT 000000
11:40:52.958 - newcamd525:xxxxxxx.xx:xxxxx: send_ecm( CAID 0d02, IDENT 0000a0 )
11:40:54.456 - newcamd525:xxxxxxx.xx:xxxxx: send_ecm( CAID 0d02, IDENT 0000a0 )
11:41:04.444 - newcamd525:xxxxxxx.xx:xxxxx: send_ecm( CAID 0d02, IDENT 0000a0 )
11:41:14.469 - newcamd525:xxxxxxx.xx:xxxxx: send_ecm( CAID 0d02, IDENT 0000a0 )

All other UPC programs work (except Universal CZ and this one).

suma · 27 January 2011, 13:58:58

I hope so, usually when we add new channels- they start working next morning.

alihasan · 27 January 2011, 14:11:27

Thank you. Let me ask just one q. more. I have UPC, all channels work fine except Universal CZ (12,380/V). We talked about it time ago, can ґt figure it out why, cos all other channels work fine in UPC.

suma · 27 January 2011, 14:18:57

We'll check it a bit later. OK?

alihasan · 27 January 2011, 14:47:38

Sure, thanks.

evrynet · 27 January 2011, 17:27:17

alihasan,

Whats the exact details of NAT GEO WILD HD?

27500H?

alihasan · 27 January 2011, 17:59:03

Quote from: evrynet on 27 January 2011, 17:27:17
alihasan,

Whats the exact details of NAT GEO WILD HD?

27500H?

satelit: Thor 5 (0,8°W)
kmitočet: 11,785 GHz
polarizace: horizontбlnн
SR: 30000
FEC 3/4
norma: DVB-S2
modulace: 8PSK
kуdovбnн (CA systйmy): Conax (karty Canal Digital), Nagravision 3, Cryptoworks (karty UPC Direct)

evrynet · 27 January 2011, 18:14:44

Thanks

alihasan · 28 January 2011, 10:02:47

Nat Geo Wild HD and Universal CZ are working from today

THANK YOU!

opatsoupa · 11 February 2011, 21:13:43

2 problems :
1) I made double subscription by mistake and charged double. How we can payback the half of double package?

2) The worst is this problem. I made the subscription but cannot connect. I tried set newcamd or camd35 but nothing.

1. Equipment
AMIKO Alien 8900 Linux (Sparks).
The files that has on plugins/var/keys are exactly these :
a) oscam.server
b) oscam.conf
c) oscam.user
d) newcamd.list
e) cccamd.list
f) mg_cfg

What should I do with these files? Please explain me, because I tried several settings and couldn't connect.

Do I have to make any particular setting on my receiver? I mean like setting a specific IP or anything? Please help.

2. protocol
Oscam

3. subscription
VIP lite (3 days, double by mistake), Penthouse HD(1 month)

4. software used for sharing
plug ins
a) oscam.server
b) oscam.conf
c) oscam.user
d) newcamd.list
e) cccamd.list
f) mg_cfg

What else do you need in order to help me?
My subscription started from this morning but I cannot use it.
Do you want to send you somehow the files and send them back to me ready for use?
Please help

PS : I sent some emails but noone corresponted. I also sent you the files in these emails. Please tell me if there is other email in order for faster response.

suma · 11 February 2011, 21:55:53

Hello, let's start reading the forum first
http://www.cardsharing.cc/index.php?topic=24639.msg63094#msg63094
I think, Oscam and Cccam is the reason of your disconnection. Change it and set up mgcamd (the EMU recommended for newcamd protocol).

Regards

opatsoupa · 11 February 2011, 22:11:45

But how I will set mgcamd? There is a file mg_cam but has several things in it like these :

What should I set?

#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 03 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 means CCcam or NewCamd client

G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 15

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 300 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 16 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2/alien NewCamd client
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 11 ipbox/alien CCcam client
# 12 Fortis
B: { 01 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { http://some.host.com/keys.php }

opatsoupa · 12 February 2011, 02:33:59

I also have the problem of double charge for the same package...

I cannot make the correct settings to use the packages I paid and I also paid twice for one package that is for the exact same days 11-13/02. I hope moderator looks on my problems.

For the connection, anyone? How shall I set the files for camd3? Someone to write what exactly is written to his ccamd file (without user pass of course).

As for the [reader], I have to write anything else on file or only this?
Shall I write a C Line too? I ask because I see a different line with cs357x in front and I dont know where to write this...

mootrix · 12 February 2011, 04:09:04

Movies and sports channels are not working. They used to and you said SKY WORLD is with the package which includes movies and sports so why isn't it working. I was was much looking forward to a movie.

Thanks,
Matt.

leo3081 · 12 February 2011, 04:12:16

9 out of 10 the movies and sports are working mite be the server but i dont know how to log with my box so cant say whats wrong

suma · 12 February 2011, 05:16:42

This is mgcamd installation topic http://www.cardsharing.cc/index.php?topic=15767.0
This is mgcamd 1.35 topic http://www.cardsharing.cc/index.php?topic=23717.0
Of this:

Quote from: opatsoupa on 11 February 2011, 21:13:43
software used for sharing
plug ins
a) oscam.server
b) oscam.conf
c) oscam.user
d) newcamd.list
e) cccamd.list
f) mg_cfg

you have to delete a, b, c, e leaving only d) and f) items.
Why don't you want to read the forum? Or, you think, I will guide you step by step? Forum and all descriptions are for you to read, learn, and try.

regards

suma · 12 February 2011, 07:12:55

Quote from: opatsoupa on 12 February 2011, 02:33:59
I also have the problem of double charge for the same package...

Please write e-mail to the Moderator, that you have paid twice. Money will be returned back to your balance.

suma · 12 February 2011, 07:15:36

Quote from: opatsoupa on 12 February 2011, 02:33:59
Someone to write what exactly is written to his ccamd file (without user pass of course).

As was already written in the thread re: recommended and prohibited soft, you are using cccam at your own risk. We do not know how to set it up, because it is not recommended for use. Use mgcamd emulator. Read corresponding threads how to set it up.