Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Cant get it to work  (Прочитано 6512 раз)

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Cant get it to work
« : 16 Декабря 2011, 05:33:28 »
Hi,

Im having the SKY UK package, and first I tried using DVBDream with WinCSC and that worked fine, but DVDDream dont support mpeg4 for my Hauppauge HVR 4000, so had to change to ProgDVB.

In ProgDVB, mpeg4 works fine, and it finds all the channels, but WinCSC just say: "Disconnected" and I cant get it to work.

Then I tried CSC in ProgDVB. I have configured it, and when I try to watch a channel, its still locked.


I really hope that I could get some help. What do I do?

My user is Kylle
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #1 : 16 Декабря 2011, 09:48:28 »
Hi,
Check codecs installed on your system. K-light codec pack is the most efficient in this case. MPEG-4 must be installed. If your software (DVB card) does not support MPEG-4 or HD, change your DVB card, it is useless.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #2 : 16 Декабря 2011, 20:17:33 »
All HD and mpeg4 FTA channels is working fine. But ProgDVB won't decrypt any of my channels using CSC.
I think the config maybe isnt right, but dont know what is wrong. I inserted all my login details into the Configure Server-tab in CSC, added them, and Saved them. But no pay channels will start.

Any ideas what Im doing wrong?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #3 : 16 Декабря 2011, 20:23:17 »
Try other versions of ProgDVB. If SkyUK worked for you with DVBDream, it must work with ProgDVB, i think
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #4 : 16 Декабря 2011, 20:57:16 »
I have now tried ProgDVB 6.73, 6.74 and 6.80, but it still wont unlock the channels. :(

Now im lost.
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #5 : 16 Декабря 2011, 21:40:36 »
After reading some more I saw this:

Цитировать
After scanning the channels in Prog DVB (in case if you are using CSC plug-in), after you enter all the required information to the csc.ini file, you need:

RIGHT CLICK ON THE CHANNEL SELECTED, IN THE OPENED WINDOW => CHANNEL PROPERTIES => CHOOSE THE REQUIRED IDENT (IN THE LOWER RIGHT CORNER), DOUBLE CLICK THE REQUIRED LINE (THE LINE BECOMES BLUE) => APPLY => OK

But I dont know how I do that.

In Channel Properties:


What do I do here?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #6 : 16 Декабря 2011, 22:10:57 »
Version of ProgDVB has changed since the time when the topic with CSC description was written. I have no idea where are the required fields are located in the newer Prog versions. Check all subfolders and find something similar.
have you read this http://www.cardsharing.cc/index.php?topic=8140.0 ?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

GTAVCS

  • Новичок
  • *
  • Сообщений: 2
Re: Cant get it to work
« Ответ #7 : 16 Декабря 2011, 22:35:11 »
to get ProgDVB and csc to unscramble any channel. goto plugins then cardserver client then click on monitor then click on the bottom caid
SkyStar 2 ProgDVB (plug-in CSC) Sky UK

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #8 : 16 Декабря 2011, 23:33:12 »
Hi again.

I have now tried what GTAVCS said, and if I press "0963   0505   000000" it descramble the channel Im watching, but it seems that I have to do it every time, even on the same channel.

How do I solve that?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

GTAVCS

  • Новичок
  • *
  • Сообщений: 2
Re: Cant get it to work
« Ответ #9 : 16 Декабря 2011, 23:55:04 »
unfortunatly I dont know how to make the change permanent.
there are other plugins that chooses the caid automomaticly but they are all banned on this server
SkyStar 2 ProgDVB (plug-in CSC) Sky UK

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #10 : 17 Декабря 2011, 16:04:18 »
Hi again.

I now made a new subscription on the Canal Digital Nordic package, but I cant get it to work at all.
Is special settings needed, to get this package to work?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #11 : 17 Декабря 2011, 16:23:25 »
I just readed in an other tropic, that there is some problems with this package.
When do you think it will work again?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #12 : 17 Декабря 2011, 18:37:49 »
When we have new cards. Old cards do not respond.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #13 : 17 Декабря 2011, 18:53:46 »
Ok. If its going to take a while, then can I please be changed to Viasat Nordic untill its working again?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #14 : 17 Декабря 2011, 19:10:40 »
You can send e-mail to Moderator with request to return money for Canal Digital Nordic to your balance and purchase anything else. You may also freeze your subscription for uncertain period (until it works again).
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #15 : 17 Декабря 2011, 19:25:29 »
What is the email address?
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9598
  • Keep trying!
Re: Cant get it to work
« Ответ #16 : 17 Декабря 2011, 19:53:18 »
Please OPEN YOUR EYES! When will you start reading the forum and stop asking the questions described in almost every thread?
Please, start reading ans studying the forum!

http://www.cardsharing.cc/index.php?topic=11620.0
http://www.cardsharing.cc/index.php?topic=11573.0
http://www.cardsharing.cc/index.php?topic=11621.0
http://www.cardsharing.cc/index.php?topic=27416.0
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Kylle

  • Старожил
  • ****
  • Сообщений: 114
Re: Cant get it to work
« Ответ #17 : 17 Декабря 2011, 19:58:47 »
Sorry. Won't happen again!

Thanks for your help.
VU+ Duo2, VIP ALL ULTRA, Blackhole image, newcamd, MgCamd 1.35a, server_14, User: Kylle.