Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working  (Прочитано 34508 раз)

Jogi

  • Старожил
  • ****
  • Сообщений: 445
I am using Oscam11503 on a AX HD51 box and decoding of the channels named in the subject of the thread was fine like all other channels  until yesterday.
Add the parameter disablecrccws to the newcamd-reader fpr CAID 098C and all channels are working again, except there two channels with different behavior:
Sky Cinema+1HD codeword status "not found" = Oscam starts to decode the channel again with no wait time as you can see (timeout configured to 7200, but this is no timeout, this the reply "not found" from server)
For DAZN-2 HD the server replied with "found" = most likely codeword is send to the box, but not decoding, screen remain black (what should I say, from the logfile it looks as usual for working decoding *g*

In addition a small log from DAZN-1 HD: logfile does not look different from the logfile of DAZN-2HD but this channel is decoded, I get a picture on the screen.

As I cannot find anything on the internet regarding "special behavior of these two channels DAZN-2HD and Cinema+1HD" I post it here.
I am not sure how many cards you have, but for DAZN-2HD it simply looks like the Oscam-reader of the server has not been updated with the new parameter disablecrccws = 1 (and it does not matter which reader is missing this parameter, as soon as one reader in the line of decryption does not have the parameter its not working anymore) .
As for Sky Cinema +1HD I do not know why the cw is "not found" (at least Sky Cinema+1 standard definition works fine and all the other channels of Sky Germany *g*)
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B2A PROVID: 000000
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 098C ECM_PID: 1A2A PROVID: 000000
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C2A PROVID: 000000
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in caPMT
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A2A ANY CHID PMTPID 0076 VPID 16FF
2019/04/19 11:55:31 6C0FD298 c   (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in PMT
2019/04/19 11:55:31 6C0FD298 c      (ecm) ax (098C@000000/0B67/0086/9F:E0E393EF5FE5696DE6A91590261082B4): not found (53 ms) by Sky-DE - Cinema+1 HD
2019/04/19 11:55:32 6C0FD298 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/04/19 11:55:32 6C0FD298 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A2A ANY CHID PMTPID 0076 VPID 16FF
2019/04/19 11:55:32 6C0FD298 c      (ecm) ax (098C@000000/0B67/0086/9F:E0E393EF5FE5696DE6A91590261082B4): not found (1 ms) by Sky-DE - Cinema+1 HD
2019/04/19 11:55:33 6C0FD298 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/04/19 11:55:33 6C0FD298 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A2A ANY CHID PMTPID 0076 VPID 16FF
2019/04/19 11:55:33 6C0FD298 c      (ecm) ax (098C@000000/0B67/0086/9F:E0E393EF5FE5696DE6A91590261082B4): not found (1 ms) by Sky-DE - Cinema+1 HD
2019/04/19 11:55:34 6C0FD298 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!

2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B11 PROVID: 000000
2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 098C ECM_PID: 1A11 PROVID: 000000
2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C11 PROVID: 000000
2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in caPMT
2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A11 ANY CHID PMTPID 0063 VPID 03FF
2019/04/19 12:01:08 6C0FD298 c   (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in PMT
2019/04/19 12:01:08 6C0FD298 c      (ecm) ax (098C@000000/0135/007A/9F:E82EF79BC30BAA4F74475B26016F1AA4): found (38 ms) by Sky-DE - DAZN-2 HD
2019/04/19 12:01:09 6C0FD298 c      (ecm) ax (098C@000000/0135/007A/9F:556AC17E1C35E322B398DAD0956CCC5E): found (545 ms) by Sky-DE - DAZN-2 HD
2019/04/19 12:01:16 6C0FD298 c      (ecm) ax (098C@000000/0135/007A/9F:913C17F82D32DA3212DFF2223CBC7316): found (532 ms) by Sky-DE - DAZN-2 HD
2019/04/19 12:01:23 6C0FD298 c      (ecm) ax (098C@000000/0135/007A/9F:AAF7B5AC741E0FC60DCBD73470E4262A): found (529 ms) by Sky-DE - DAZN-2 HD
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 stop descrambling program number 007A (DAZN-2 HD)
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 098C ECM_PID: 1A55 PROVID: 000000
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B55 PROVID: 000000
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 098D ECM_PID: 1C55 PROVID: 000000
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 09AF ECM_PID: 1F55 PROVID: 000000
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 found 4 ECMpids and 2 STREAMpids in caPMT
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 098C PROVID 000000 ECMPID 1A55 ANY CHID PMTPID 0066 VPID 06FF
2019/04/19 12:01:27 6C0FD298 c   (dvbapi) Demuxer 0 found 4 ECMpids and 2 STREAMpids in PMT
2019/04/19 12:01:28 6C0FD298 c      (ecm) ax (098C@000000/1272/0084/9F:1DE01A03001BB524A7F6D5171863416A): found (22 ms) by Sky-DE - DAZN-1 HD
2019/04/19 12:01:30 6C0FD298 c      (ecm) ax (098C@000000/1272/0084/9F:5FA42EE5147C94F72213E46491E78F6D): found (225 ms) by Sky-DE - DAZN-1 HD
2019/04/19 12:01:37 6C0FD298 c      (ecm) ax (098C@000000/1272/0084/9F:F2E73E461D0E4D81E5E4A7118A2B5169): found (265 ms) by Sky-DE - DAZN-1 HD
PS: and message "restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!" is fine, I have disabled CAIDs like 09C4 and 098D via oscam.dvbapi - so there is only one of 3 available caids to use and that is also fine as the server only provide decoding of caid 098C.
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

amigo-3

  • Новичок
  • *
  • Сообщений: 9
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #1 : 19 Апреля 2019, 13:32:16 »
I have the same problem. Since I have the new parameters in the OSCAM 1.20 (rev: 11431) inserted, sporadically freeze all channels. only after reinstalling the CAM do they work again. Does one have an idea why it is?
The oscam.dvbapi and oscam.whitelist are not present in the config.

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #2 : 19 Апреля 2019, 13:49:17 »
noticed a very small amount of freezers and sometimes stopping for about 2 Minutes (looks like the reset of server as usual from 2AM CET)
most likely related to the fact that server get many decoding requests as for many people the scree remain black on any channel (Mgcamd was the advised emulator to use for this server *g*). I believe this will result in "fast channel switching" for the affected people what will send even more requests to the server.
In addition I notice a slightly higher response time from server: response for the working DAZN-1 is about 240ms until yesterday usual response time was about 150-180ms for Sky Germany. New decoding might infect server performance: until yesterday only 48bit ot the CW needed to be decoded (rest was calculated by emulator), not the whole 64bit need to be decoded from the card (and that is what this parameter in OScam do: disable partial codeword-calculation as it was done before). Unfortunately this option is not available for Mgcamd or original CCcam emulator .
Response time up to ~550ms should be fine, so if DAZN-2 would work I assume it will also have some freezers, if I check the response time in the logfile. There might be better internet connections but mine has at least no bad performance, ping result from my PC to the server: Minimum = 19ms, Maximum = 26ms, Average = 21ms
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

amigo-3

  • Новичок
  • *
  • Сообщений: 9
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #3 : 19 Апреля 2019, 14:40:31 »

As I said, when the channels freeze, nothing works. Last time I ran the "VU + Solo 4k Se" for almost 60 minutes. Without success. Only after I deleted the OSCAM and created new, it worked. That was 2 time, in the last 24 hours.
I dont know why? :-\

defkev

  • Новичок
  • *
  • Сообщений: 6
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #4 : 19 Апреля 2019, 19:36:34 »
Same here after adding disablecrccws = 1 to the sky readers.

DAZN 2 Bar HD gets decoded but stays black will Sky Cinema +1 HD gives me a Not Found, strangely on the backup only as the main is never tried:

08204EB0 c      (ecm) dvbapiau (098C@000000/0B67/0086/9F:DDEBA6F1811AC73FF167ABB1754B8D04): not found (210 ms) by backup_sky (F/2/2/2) - Sky Cinema +1 HD Germany
08204EB0 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
08204EB0 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 098C PROVID 000000 ECMPID 1A2A ANY CHID PMTPID 0076 VPID 16FF
08204EB0 c      (ecm) dvbapiau (098C@000000/0B67/0086/9F:DDEBA6F1811AC73FF167ABB1754B8D04): not found (1 ms) by backup_sky (F/2/2/2) - Sky Cinema +1 HD Germany
08204EB0 c   (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!

Цитировать
In addition I notice a slightly higher response time from server: response for the working DAZN-1 is about 240ms until yesterday usual response time was about 150-180ms for Sky Germany. New decoding might infect server performance: until yesterday only 48bit ot the CW needed to be decoded (rest was calculated by emulator), not the whole 64bit need to be decoded from the card (and that is what this parameter in OScam do: disable partial codeword-calculation as it was done before). Unfortunately this option is not available for Mgcamd or original CCcam emulator .

Response time is mostly the same, maybe ~10ms more but no freezes.

As for the purpose of disablecrccws
This has nothing to do with the amount of data being decoded but simply disables checksum validation for the CWs, hence "Disable CRC CWs"
See http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.server#disablecrccws

I suppose the admin disabled checksum generation, which is a CPU intensive task, to reduce server load, which makes sense.

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #5 : 20 Апреля 2019, 15:45:41 »
here: oscam with newcamd:
DAZN2 and sky Cinema HD+1 is not working
ORF is not working

oscam with CCCAM
freezing every 5 seconds on most channels
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

hotznp

  • Новичок
  • *
  • Сообщений: 2
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #6 : 20 Апреля 2019, 22:00:26 »
here: oscam with newcamd:
DAZN2 and sky Cinema HD+1 is not working
ORF is not working

oscam with CCCAM
freezing every 5 seconds on most channels

Do you have also a rules violation warning after you tried oscam with cccam protocol?

https://www.cardsharingserver.com/members.php?module=jss

kalamari

  • Новичок
  • *
  • Сообщений: 6
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #7 : 20 Апреля 2019, 23:42:12 »
Hi,

DAZN2 now works again  :) - Sky Cinema HD +1 still not working.

But DAZN2 naturally is more important.

Thank's very much to the Team.
Vu+ Solo2 - Vti 14.0.2 - Oscam - newcamd protocol

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #8 : 21 Апреля 2019, 07:47:37 »
same for me: DAZN-2hd is now decoded but as before (logfile) "not found" for Cinema+1

and YES, DAZN-2 is more important, Cinema+1 ins only a rerun and can be compensated with Cinema+1 standard-definition

many thanks
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

amigo-3

  • Новичок
  • *
  • Сообщений: 9
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #9 : 21 Апреля 2019, 16:07:03 »

I could simulate the freeze problems today. When I remove these three files in "file - /etc/tuxbox/config/oscam.emmstat + oscam.emmcache + oscam.ccache", I have freeze problems every 3-5 seconds.

With these files I currently have no freeze problems anymore. But my IP is blocked on every VU + UNO4kSE GUI reboot. I have the latest OSCAM version installed (OSCAM rev: 11431).
Do you have an idea where I have built a mistake here?

amigo-3

  • Новичок
  • *
  • Сообщений: 9
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #10 : 21 Апреля 2019, 16:09:11 »
And i have "No violations of server rules detected!"

 :-\ :-\ :-\ :-\ :-\ :-\ :-\ :o

hotznp

  • Новичок
  • *
  • Сообщений: 2
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #11 : 21 Апреля 2019, 16:12:49 »

I could simulate the freeze problems today. When I remove these three files in "file - /etc/tuxbox/config/oscam.emmstat + oscam.emmcache + oscam.ccache", I have freeze problems every 3-5 seconds.

With these files I currently have no freeze problems anymore. But my IP is blocked on every VU + UNO4kSE GUI reboot. I have the latest OSCAM version installed (OSCAM rev: 11431).
Do you have an idea where I have built a mistake here?


This is what i wondering. Long time i use OSCAM only, since this problem i have red alert in my connections history claiming i connect with to emulators:


Цитировать
Connections by emulators:
2    - CCcam 2.3.0
2    - OSCam

Jules

  • Новичок
  • *
  • Сообщений: 3
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #12 : 21 Апреля 2019, 23:31:29 »
Hi,
I have the same problem.
I have tried the config but still not working.
Can someone help me please?
Thanks.
Regards,
Jules.

jimli

  • Пользователь
  • **
  • Сообщений: 20
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #13 : 22 Апреля 2019, 00:04:25 »
I suspect that issues with Sky Cinema +1 HD not decoding are unrelated. My log shows a "rejected" when I switch to this channel (oscam in cccam mode). So I guess there is a problem with the card on this channel.

The channels that do not work due the migration to 64bit CWs are a different issue, in this case there is no error message in the log, but the channel stays black. I prefer to insert this in the [global] section of OSCAM. It does the same thing as the "Skip CWs checksum test" on the reader, but just for selected CAIDs and the channels with 64bit CWs will be decoded again:
disablecrccws_only_for        = 0500:050F00;09C4:000000;098C:000000;098D:000000

Regarding the freeze problem (I am talking about the sporadic freeze that lasts for 7 seconds not the permanent freeze that happens very often) I have read that this is due to upstream servers that are still sending wrong 64bit CW checksums sometimes. Using OSCAM Trunk (r11516) should fix the sproadic freeze issue due to a resolved bug, but it seems that everybody in the chain must do so. I tried this new version on my client and I still get sporadic freezes.

I cannot say what causes all the other issues with constant freezing every few seconds or blocked IP, I do not have such issues and I think that other unrelated problems are behind that.

VU+ Duo2 on VTI 14, Oscam 1.2, Astra 19,2E + 28.2E, Hotbird 13E

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #14 : 22 Апреля 2019, 07:46:17 »
All is running perfect for me - only Sky Cinema+1HD not working!
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

VuZero

  • Новичок
  • *
  • Сообщений: 5
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #15 : 22 Апреля 2019, 15:24:10 »
läuft bei VIP Germany ORF?

marcoxx

  • Пользователь
  • **
  • Сообщений: 48
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #16 : 22 Апреля 2019, 15:44:50 »
Sollte schon gehen.... mit OSCAM/newcamd in der oscam.server datei beim ORF caid dies eintragen: ident = 0D95:000000,000004
unterscheidet sich etwas von der config hier wo man bekommt.
Erklärung dazu hier:
https://www.cardsharing.cc/index.php?topic=35400.msg128424#msg128424


läuft bei VIP Germany ORF?
GIGABLUE UE 4K HD, Astra 19,2E, Vip Astra, Teamblue Image 6.3, ARM CPU;  oscam-1.20_svn11581-798/NewcamD

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #17 : 22 Апреля 2019, 22:45:31 »
hatte nur:
ident = 0D95:000004
drin.

Mal sehen obs jetzt geht...
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

Jules

  • Новичок
  • *
  • Сообщений: 3
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #18 : 23 Апреля 2019, 12:16:40 »
Could there be a solution for S*y uk with this please?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9816
  • Keep trying!
Re: Oscam + disablecrccws: DAZN2-HD and Sky Cinema+1HD not working
« Ответ #19 : 23 Апреля 2019, 13:59:54 »
Could there be a solution for S*y uk with this please?

No, package was removed from the billing.
No way
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic