Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: CAID 0624  (Прочитано 11454 раз)

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #60 : 05 Апреля 2018, 06:15:56 »
There are only 2 readers for SkyLink (total 4, if we count with back-up server)

[reader]
label       = "main_cardsharing.cc_XXX32"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = servXX.com,XXX32
user        = login
password    = password
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0D96:000004

[reader]
label       = "main_cardsharing.cc_XXX34"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = servXX.com,XXX34
user        = login
password    = password
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0624:000000


I do not know why your emulator cannot connect 0624 reader. Something is wrong with your config-files, because emulator takes all information from oscam.server file.
Be sure that you do not use any other emulators with respective settings (Mgcamd with ignore-priority lists), etc. If you use Oscam, you have to use only Oscam, nothing else. All other emulators and their respective config-files shall be deleted with further restart of receiver.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

henrix55

  • Пользователь
  • **
  • Сообщений: 10
Re: CAID 0624
« Ответ #61 : 23 Апреля 2018, 20:51:34 »
Hello

I using Acamd and not working PrimaKrimi

I have error: NewCamd: ECM 1F95 062/00000000 not able to decode.


Do you know wheree is the problem?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #62 : 27 Апреля 2018, 06:59:07 »
Hello
I using Acamd and not working PrimaKrimi
I have error: NewCamd: ECM 1F95 062/00000000 not able to decode.
Do you know wheree is the problem?

Hi,
The  problem is that you visit billing (cardsharingserver.com) not too much often...
I doubt that you even know that there are 2 ports for SkyLink (new port is available for half-year so far. I am sure, you are connected the only port.
Check your settings and compare to those provided in the billing and add new port for SkyLink
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

kubistek3

  • Новичок
  • *
  • Сообщений: 1
  • VU zero 4K, Oscam rev. 1.20_11086
Re: CAID 0624
« Ответ #63 : 06 Мая 2018, 21:21:44 »
I tried everything... I changed the domain name to IP.
So far, it's OK. Tomorrow I change the IP to a domain name and see ...

Prosim ta ako a kde zmenim IP adresu na domenove meno ? Mam ten isty problem. VU zero 4k enigma 2 vti 13.0.9 ,
Oscam 11086.

yare

  • Новичок
  • *
  • Сообщений: 6
Re: CAID 0624
« Ответ #64 : 08 Мая 2018, 12:25:06 »
V konfiguracnom subore.  Namiesto domenoveho nazvu som dal IP adresu. Ale podla mna v tom chyba nebola, pretoze som to potom vratil spat a islo to aj s domenovym menom.
Amiko SHD-8900 Alien, CCcam2.14, Skylink HD

atec

  • Новичок
  • *
  • Сообщений: 6
Re: CAID 0624
« Ответ #65 : 01 Сентября 2018, 08:58:26 »
SkyLink is moving many channels to the new parameters.
At the moment they are already on air with CAIDs 0624, 0D96, 500 (...) but decoded are in 0D06 only by your service.
So I just want to remind you to add these new channels to the 0624.
Thanks.

Skylink Channels with new parameters:

Retro Music TV          11739 MHz/V   2/3   29900   DVB-S2 / 8PSK
E! Entertainment CZ     11739 MHz/V   2/3   29900   DVB-S2 / 8PSK
Nautical HD             11856 MHz/V   2/3   29900   DVB-S2 / 8PSK
duck TV                 11934 MHz/V   3/4   27500   DVB-S2 / 8PSK
AMC                     11934 MHz/V   3/4   27500   DVB-S2 / 8PSK
Filmbox Extra HD        11934 MHz/V   3/4   27500   DVB-S2 / 8PSK
Disney CZ               11934 MHz/V   3/4   27500   DVB-S2 / 8PSK
TV Paprika              11934 MHz/V   3/4   27500   DVB-S2 / 8PSK
Mnam TV                 11973 MHz/V   2/3   29900   DVB-S2 / 8PSK
KinoSvet                11973 MHz/V   2/3   29900   DVB-S2 / 8PSK
Golf Channel            11973 MHz/V   2/3   29900   DVB-S2 / 8PSK
Nickelodeon CZ          12070 MHz/H   3/4   27500   DVB-S / QPSK
JOJ Cinema +1 HD novy   12070 MHz/H   3/4   27500   DVB-S / QPSK
Sport 5                 12090 MHz/V   2/3   29900   DVB-S2 / 8PSK
Sport 2 HD              12090 MHz/V   2/3   29900   DVB-S2 / 8PSK
Discovery CZ            12110 MHz/H   3/4   27500   DVB-S2 / 8PSK
Film+                   12129 MHz/V   2/3   29900   DVB-S2 / 8PSK
Filmbox Plus            12129 MHz/V   2/3   29900   DVB-S2 / 8PSK
Filmbox Premium         12129 MHz/V   2/3   29900   DVB-S2 / 8PSK
UP NETWORK CZ           12129 MHz/V   2/3   29900   DVB-S2 / 8PSK
Prima +1 HD novy        12344 MHz/H   2/3   29900   DVB-S2 / 8PSK
Xtrend ET 10000 G-Edition, Open ATV 6.1, USALS, VIP Czech, MgCamd 1.38r1

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #66 : 03 Сентября 2018, 06:47:10 »
Moderator is notified.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #67 : 03 Сентября 2018, 13:58:19 »
For your information:

SkyLink package will be shared using CAID 0D96 ONLY until it's subscription is finished. Only those channels which are not working with CAID 0D96 will be shared with CAID 0624.
We will not share SkyLink in both encryptions at once, because receivers available among our users are sending requests to the server for 2 encryptions at once. As a results, they are banned by the server for cascading.   
Are the above channels working? I think, they are working. For you, the issue of encryption shall not be a problem, if your have normal receiver.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

bambinot

  • Новичок
  • *
  • Сообщений: 3
Re: CAID 0624
« Ответ #68 : 15 Апреля 2019, 17:03:27 »
I have a strange issue.

When I setup the first reader with ident = 0D96:000004, I can't decode programs with Cryptoworks. Only when I change the ident = 0D96:000000,000004 decoding on the first reader with Cryptoworks (0D96) on port 20032 is working fine. New programs like Seznam.CZ working properly with IRDETO decoding on second reader on port XXX34.

Have you seen something similar?

Original setup:
[reader]
label       = "main_blablabla_XXX32"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = blablabla,XXX32
user        =
password    =
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0D96:000004

[reader]
label       = "main_blablabla_XXX34"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = blablabla,XXX34
user        =
password    =
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0624:000000

Working setup:
[reader]
label       = "main_blablabla_XXX32"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = blablabla,XXX32
user        =
password    =
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0D96:000000,000004

[reader]
label       = "main_blablabla_XXX34"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = blablabla,XXX34
user        =
password    =
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 0624:000000

Vu+ Uno4K SE, BlackHole 3.0.8.0, oscam-1.20_svn-r11469, SkyLink HD 23E subscription with Dual-login option.
Vu+ Uno4K SE, Astra 19,2E and 23,5E, BlackHole 3.0.8.0, oscam-1.20_svn-r11469, SkyLink HD 23E subscription with Dual-login option.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #69 : 15 Апреля 2019, 17:36:44 »
Have you checked the billing? Open the billing and compare your settings with those provided in your subscription- newcamd for oscam
P.S. in the very bottom of the page, you will see:

Package SkyLink HD 23E:
Need connect to both ports for full package!
Port XXX32 - Skylink Cryptoworks (ICE) 99% channels
Port XXX34 - Skylink IRDETO, only new channels which not work from Cryptoworks (ICE) cards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

bambinot

  • Новичок
  • *
  • Сообщений: 3
Re: CAID 0624
« Ответ #70 : 15 Апреля 2019, 21:26:36 »
Yes, my settings are copied directly from this page. I quoted it in my previous post. But with this setting, for example, the old channel 1F41 doesn't work: 1F41:0624,0D96,0500@051910|CT 1 HD|TV||CESKA TELEVIZE
In log file I can see that the channel is asking for decoding 0624 and not 0D96

2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in caPMT
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2019/04/15 16:09:16 16E61E4D c (ecm) dvbapiau (P: 0624::1F41:0474:0000 #ECM_L:64 #CW=00000000000000000000000000000000 HOP:00): not found (37 ms) by "main_cardsharing.cc_20034" - CT 1 HD
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in PMT
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2019/04/15 16:09:16 16E61E4D c (ecm) dvbapiau (P: 0624::1F41:0474:0000 #ECM_L:64 #CW=00000000000000000000000000000000 HOP:00): not found (1 ms) by "main_cardsharing.cc_20034" - CT 1 HD
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2
Vu+ Uno4K SE, Astra 19,2E and 23,5E, BlackHole 3.0.8.0, oscam-1.20_svn-r11469, SkyLink HD 23E subscription with Dual-login option.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #71 : 16 Апреля 2019, 03:44:43 »
Moderator will check
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9451
  • Keep trying!
Re: CAID 0624
« Ответ #72 : 16 Апреля 2019, 13:54:58 »
CT1 HD works without problem with Cryptoworks. Why your OsCam is sending quiries to Irdeto, not to Cryptoworks 0D96 - is a question. Probably, you have to check filters, if any.
The channels which are not broadcasted in Cryptoworks are transmitted in Irdeto.
SIDs: 17AE,1810,3732,339C,339D,07D0,36F5,13B3,17D6,335B,030E,030D,1393,1031   
The situation is similar to the one happened to Conax some time ago. 
The provider is adding new channels to Irdeto, not to Cryptoworks. 
We too, are adding the channels which cannot be decoded with Cryptoworks to Irdeto.

Check you image and compatibility with Oscam emulator. Maybe, you will have to reinstall both image+emulator and put all settings from the very beginning.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

bambinot

  • Новичок
  • *
  • Сообщений: 3
Re: CAID 0624
« Ответ #73 : 16 Апреля 2019, 15:39:39 »
OK. I will try. Thank you for help.
Vu+ Uno4K SE, Astra 19,2E and 23,5E, BlackHole 3.0.8.0, oscam-1.20_svn-r11469, SkyLink HD 23E subscription with Dual-login option.