Channels are freezing very often

aafroman · 10 September 2016, 21:15:40

I have the same problem as user mtzmt https://www.cardsharing.cc/index.php?topic=34407.msg121033;topicseen#msg121033

Channels (all) are not decoded and freezing, for last days very often (especially between 19:00-21:00 CET), I have Skylink HD 23E.

My internet connection is very stable.

Sep 10 20:06:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1555ms)
Sep 10 20:06:34 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:06:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1555ms)
Sep 10 20:06:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (128ms)
Sep 10 20:06:35 192.168.1.159 [mgcamd] emm started
Sep 10 20:06:35 192.168.1.159 CaPID: 0x0064 ProvID: 000000
Sep 10 20:06:35 192.168.1.159 CaPID: 0x0065 ProvID: 000000
Sep 10 20:06:35 192.168.1.159 CaPID: 0x0067 ProvID: 000000
Sep 10 20:06:35 192.168.1.159 CaPID: 0x0068 ProvID: 000000
Sep 10 20:06:35 192.168.1.159 CaPID: 0x0069 ProvID: 000000
Sep 10 20:06:35 192.168.1.159 CaPID: 0x00AA ProvID: 051900
Sep 10 20:06:35 192.168.1.159 CaPID: 0x00AA ProvID: 051910
Sep 10 20:06:35 192.168.1.159 [mgcamd] emm stopped
Sep 10 20:06:36 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:06:36 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:06:43 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:06:44 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8252ms)
Sep 10 20:06:44 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1308ms)
Sep 10 20:06:46 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:06:46 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:06:53 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:06:54 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8254ms)
Sep 10 20:06:54 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1323ms)
Sep 10 20:06:56 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:06:56 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:03 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:04 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8256ms)
Sep 10 20:07:04 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1312ms)
Sep 10 20:07:06 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:07:06 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:13 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:14 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8254ms)
Sep 10 20:07:14 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1316ms)
Sep 10 20:07:16 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:07:16 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:23 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:24 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8253ms)
Sep 10 20:07:24 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1309ms)
Sep 10 20:07:26 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:07:26 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:33 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (8246ms)
Sep 10 20:07:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (1304ms)
Sep 10 20:07:36 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Sep 10 20:07:36 192.168.1.159 ECM to newcamd XXX:XXX
Sep 10 20:07:40 192.168.1.159 [mg0] <- CW from newcamd XXX:XXX (4156ms)
Sep 10 20:07:40 192.168.1.159 [mg0] WARNING, both cws changed !
Sep 10 20:07:40 192.168.1.159 [mg0] 4156 msec -- Sat Sep 10 20:07:49 2016

My user history:
Requests received 739
Requests decoded 699
Requests rejected 40
- Channel not decoded 40

pykaso · 10 September 2016, 21:18:47

I can confirm

jkmusic · 10 September 2016, 22:00:50

bohužel mohu potvrdit, SkyLink ve večerních hodinách už asi 4 dny katastrofa, NC+ již v v odpoleldních hodinách ....

mtzmt · 10 September 2016, 22:27:53

same here, wrote about it yesterday. CCCAM 2.3.0, VU+ zero, VTI image 8.2.3

Pabo · 10 September 2016, 22:30:15

I confirm also this problem

gamekeeperx · 10 September 2016, 22:46:05

Hi, I have same problem. Last 3-4 days.
Is possible change connection server to difrent (more stable?) ? I´m still connected to serv3.

Where is problem?
L.

clip · 10 September 2016, 23:00:18

I can only confirm. The same problem with Skylink 23E and UPC Direct HD (cz, sk, hu) 1W

Franzfranz · 10 September 2016, 23:28:58

Same here since few days, different servers, 87 und 181, Astra 19 and Hotbird 13, here are some lines from logfile:

2016/09/10 21:04:16 53A4B147 c (ecm) client2 (098C@000000/0B58/0074/9D:7A611DB4668E1DC17E1FF23210779C69): timeout (5001 ms) by "server_port","server_port" (F/2/2/2) - S*y Action HD
2016/09/10 21:04:18 53A4B147 c (ecm) client2 (098C@000000/0B58/0074/9D:70F490F77F5527A076523596AE77FD43): rejected group (0 ms) - S*y Action HD (no matching reader)
2016/09/10 21:04:18 53A4B147 c (dvbapi) Demuxer 0 restarting decodingrequests after 3 ms with 1 enabled and 2 disabled ecmpids!
2016/09/10 21:04:18 53A4B147 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 098C PROVID 000000 ECMPID 1A11 ANY CHID PMTPID 0000 VPID 03FF
2016/09/10 21:04:19 53A4B147 c (ecm) client2 (098C@000000/0B58/0074/9D:70F490F77F5527A076523596AE77FD43): rejected group (0 ms) - S*y Action HD (no matching reader)
2016/09/10 21:04:25 53A4B147 c (ecm) client2 (098C@000000/0B58/0074/9D:B4F9D4189768CAEE4D834643EA4E5D8E): rejected group (1 ms) - S*y Action HD (no matching reader)

Never had this before, it runs rockstable for months, but now it happens sometimes, not specific time, day and night. This evening every 10-15 mins, after 1 min the service is back.

Network Router log has no packetloss or timeouts, inet connection is stable.

After write this post, I found some notes from the admin: https://www.cardsharing.cc/index.php?topic=18962.msg121044#msg121044

mtzmt · 10 September 2016, 23:40:51

probably working on it
https://www.cardsharing.cc/index.php?topic=18962.msg121044#msg121044

youpie · 11 September 2016, 10:50:03

Confirm this issu. Where is the moderator? What do you think to do against it? Thank you!

Arkaz · 12 September 2016, 18:17:24

same problem here. until now was everything working fine but last 2 weeks it is horrible.

Pabo · 12 September 2016, 22:30:32

Probably fixed? For two days all OK.......

suma · 13 September 2016, 03:32:14

Quote from: Pabo on 12 September 2016, 22:30:32
Probably fixed? For two days all OK.......

Fixed

orangutan · 15 September 2016, 17:15:07

freezing still continuing ... shiiiit

suma · 15 September 2016, 18:03:43

Quote from: orangutan on 15 September 2016, 17:15:07
freezing still continuing ... shiiiit

How can channels be freezing for you if you are banned? You cannot use CS at all, if I am not mistaken.
1. Complete your signature
2. Provide log-file

We are talking about nothing

suma · 16 September 2016, 17:43:03

We checked your subscriptions - user "orangutan" has never had any subscription, nor you have any subscription NOW. The screenshot you provided has no username and it is not clear - which subscription it is.
Check all your receivers and delete all your old subscriptions.

orangutan · 16 September 2016, 20:04:57

now cardsharing working 2 hours,then freezed:
what are you talking about? im using 4 years my setup on my receiver... my receiver cant do LOG, its old machine....

give me any GUIDELINE what i need to do
what subsription: give me any setup screenshot
..... your HELP is very poor: what did you do with CARDSHARING damn it?

you are same company like cardsharing.co? my infos is same on this website: my IP,etc...... very weird

uplna picovina cely cardsharing: beriete prachy za nic a neviete spravit poriadny SETUP SCREENSHOTS ako to treba nastavit

orangutan · 16 September 2016, 20:34:44

Quote from: suma on 15 September 2016, 18:03:43
Quote from: orangutan on 15 September 2016, 17:15:07
freezing still continuing ... shiiiit

How can channels be freezing for you if you are banned? You cannot use CS at all, if I am not mistaken.
1. Complete your signature
2. Provide log-file

We are talking about nothing

where am i BANNED? my IP is banned or my acc is banned or what?
1.complete your signature= dont understand this
2.provide log-file: how can i do this on ARIVE FERGUSON 100e?

and this : why your admin didnt response on email?

I PAID 1 YEAR and i want help from you

suma · 17 September 2016, 07:20:33

Quote from: orangutan on 16 September 2016, 20:04:57
my receiver cant do LOG, its old machine....

You are using your old machine for already 4 years. OK. Have you ever updated firmware to your receiver?
Have you ever read sub-forum re: Ariva Ferguson receivers? Do you know all issues related to your model?
I think, no.
Read and learn that firmware shall be updated as soon as a new firmware is issued
https://www.cardsharing.cc/index.php?board=54.0

Quote from: orangutan on 16 September 2016, 20:04:57
..... your HELP is very poor:

For your information: We are cardsharing service, but not Ferguson Ariva support. You are paying money for CS lines to use CS-service. If you follow our instructions correctly, everything must be OK. But if your receiver is problematic, this is not our problem, this is a problem of your receiver technical support. Check for firmware updates more frequently, update your system, and everything will be OK.
All your problems are due to your ignorance and because you do not read the forum created specially for you, not for me. Post your messages, ask other users questions, and I hope, you will receive a proper reply.
For the 4 years you are here (as you told), you did nothing.

Quote from: orangutan on 16 September 2016, 20:04:57
you are same company like cardsharing.co? my infos is same on this website: my IP,etc...... very weird

We are cardsharing.cc, don't confuse us with other companies.

suma · 17 September 2016, 07:34:25

Quote from: orangutan on 16 September 2016, 20:34:44
where am i BANNED? my IP is banned or my acc is banned or what?

This is YOUR post, not mine

Quote from: orangutan on 14 September 2016, 16:51:43
i received this mail from moderator: NICE HELP FROM HIM about description what i have to do
Hello
Your IP automatically blocking because you are connecting without active subscription ... w/help
how can i fix it? 4 years working w/problems: ARIVE FERGUSON with newcamd protocol
nejaka rada chalani?

Quote from: orangutan on 16 September 2016, 20:34:44
1.complete your signature= dont understand this

Read forum (you are 4 years here so far) and understand what we ask our clients for
https://www.cardsharing.cc/index.php?topic=24581.0
It was written not yesterday, but a bit earlier...by the way

Quote from: orangutan on 16 September 2016, 20:34:44
2.provide log-file: how can i do this on ARIVE FERGUSON 100e?

Your receiver is not linux based. How do I know this? If you have no signature, no information is mentioned on your receiver, emulator, CS-protocol, etc. - how people will know what is your box or whatever? Are you joking?

Quote from: orangutan on 16 September 2016, 20:34:44
and this : why your admin didnt response on email?

Because you never read the forum and especially FAQ
https://www.cardsharing.cc/index.php?topic=280.0

Quote from: orangutan on 16 September 2016, 20:34:44
I PAID 1 YEAR and i want help from you

You need help more from Ferguson Ariva support than from us. Our service is not for everybody with any receiver. Maybe, it's time to change your box and buy something better?

In the screenshot you provided, username is hidden. How do I know that this is you?
In this case, I trust Moderator more than you. According to Moderator, user "orangutan" has no subscriptions and never had. Prove it please.
If you were registered in the billing with other username different from "orangutan" - we ask all users to complete signature specifying their billing usernames, because they can be different from the forum username.
You have no signature, how can I know what is your billing username?