Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: valid subscription but wont allow connection  (Прочитано 4189 раз)

iainho00

  • Пользователь
  • **
  • Сообщений: 21
valid subscription but wont allow connection
« : 20 Мая 2015, 10:21:46 »
i have a valid subscription but it wont allow me to connect it says: why is it now allowing me to connect i havent had any emails to say im banned or anythin the only time i tried to connect was after i paid?
Requests received 10
Requests decoded 0
Requests rejected 10
   - Requests with violation
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #1 : 20 Мая 2015, 11:13:42 »
i have a valid subscription

Which one?

i tried to connect was after i paid?

Paid for what?


1. Complete your signature https://www.cardsharing.cc/index.php?topic=24581.0
We do not know your receiver, emulator, protocol, subscription, etc.
2. Provide a log-file of the channel(s) that are scrambled for you https://www.cardsharing.cc/index.php?topic=26069.0
Don't forget to hide private information https://www.cardsharing.cc/index.php?topic=32632.0
3. Check ping and route to the server.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #2 : 20 Мая 2015, 11:18:26 »
I have the VIP all package I purchased it yesterday put the files in newcamd.list tried to connect to your servers and your server doesn't allow it?
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #3 : 20 Мая 2015, 11:21:37 »
https://www.cardsharing.cc/index.php?topic=25803.msg71133#msg71133
I don't know what is the image used in your DM, try using the above bundle of firmware+emu
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #4 : 20 Мая 2015, 11:26:46 »
The IMG has always worked fine your server says its not allowing connection its rejecting the request
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #5 : 20 Мая 2015, 11:31:50 »
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #6 : 20 Мая 2015, 11:36:16 »
No I only use 1 box and username is iainho00 and I have been using up to 2 months ago then I went on holiday came back topped up and now not working
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #7 : 20 Мая 2015, 11:44:44 »
From your statistics:

Violations
13 requests from different emulators (receivers)
WARNING! Only one connection is allowed per one port (one receiver – one emulator – one connection). Be sure, that your login and password are used only for one receiver. Also be sure that only one emulator is active per one receiver. If several emulators are installed in your receiver, «Running» condition and type of run «Auto» shall be only for one emulator!
Violation of Rule №9
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #8 : 20 Мая 2015, 11:50:03 »
i only have one cam installed ill reflash the box and try again with only 1 cam i dont see why it would do that thou  as i only have 1 box with one cam
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #9 : 20 Мая 2015, 11:55:37 »
FYI: statistics is taken not from the ceiling. Server detects connections from various emulators. Are you sure that the second receiver is unplugged?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #10 : 20 Мая 2015, 12:01:56 »
i dont have a second receiver i only own one i sold the last one 2 years ago i only have one box with one cam
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #11 : 20 Мая 2015, 12:11:13 »
ok box flashed and mgcamd 1.35 installed is it safe to connect now?
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #12 : 20 Мая 2015, 12:11:30 »
This is YOUR receiver and it's settings. Server detected rules violation. You are the owner of the receiver. Please have time to sit and find out the reason - why server does not allow connecting. This is what I can finally suggest you to do.
For more of your questions, the only answer is SIT and FIND OUT why?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: valid subscription but wont allow connection
« Ответ #13 : 20 Мая 2015, 12:12:55 »
ok box flashed and mgcamd 1.35 installed is it safe to connect now?

How do I know if it is safe or not?
Try connecting and you will see the result.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #14 : 20 Мая 2015, 12:13:52 »
when will it be safe to try to reconnect ?
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e

iainho00

  • Пользователь
  • **
  • Сообщений: 21
Re: valid subscription but wont allow connection
« Ответ #15 : 20 Мая 2015, 12:21:15 »
working now thanks for all your help
you rock :D
dm800hd (clone) and when that breaks i use old dm500s mgcamd 1.35 Sky 28.2e and 13e