• Welcome to Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!.
CLICK HERE TO ENTER BILLING / ВОЙТИ В БИЛЛИНГ

HD Plus (Deutschland) 19E not work :(

Started by OdpolPr, 30 July 2012, 18:50:53

Previous topic - Next topic

wolleman

aber nicht vergessen in mg_cfg   F: { 00 } sonst geht HD+ nicht.
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

marcelmmx

Tried to configure everything with mgcamd - installed mgcamd 1.35a, downloaded the ignore, mg_cfg, priority and replace files, copied cws config to newcamd.list, set permissions to 755. Results are very mixed.
HD+ works, however, only some channels and some without sound. As for Sky DE channels work, some without sound. As for Skylink nothing works.
Went back to oscam- here sky and skylink work including sound, but HD+ does not. Also, channel switching seems slower with mgcamd compared to oscam.
Is there anything in mgcamd configuration I can change to fix the issues mentioned above?
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

Hi,
I think, you need to go here http://www.cardsharing.cc/index.php?board=53.0 and read what is special in VU+ receivers. To my mind, you need to change image.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

suma

Quote from: wolleman on 30 September 2013, 21:40:09
hallo ich habe HD+ seit ca. 1 1/2 jahren hier. es funkt sehr gut mit mgcamd 1.35a(dm800). einfach alle einstellungen vom server nutzen. wennes bei dir nicht funktioniert, dann sind das einstellungsgeschichte. das bild bleibt maximal ein mal am tag stehen ca. 1 sec. damit kann ich sehr gut leben! mfg

Hi, reinstall image and try again. For dm800 HD, we recommend Domica image.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

I suspect the mgcamd I downloaded may be faulty. Suma, can you please give me a link, where I can download mgcamd 1.35a, which you know is 100% good. I saw there is version 1.38 available - you do not recommend to use this version?
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

Suma, thank you for your answer, but I currently have VTI image and would like to keep it. The link you gave me is to download the PLI image and then mgcamd from the receiver. Can you please give me a link where I can download mgcamd for VTI (Enigma 2), which you know is working? Thanks.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

Unfortunately, I am using Domica image with an option to download mgcamd within the image and I cannot confirm 100% that any emu downloaded using web link will 100% work with your image.
http://www.dreamboxtool.com/MGcamd/MgCamd-1-35a-Complete-for-e2.html
http://www.luxsat.eu/Dreambox/index_emus.htm

Try these, and if you fail, re-install image (OpenPLI 3.0 is the most recommended for your receiver)


regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

Tried open pli - even worse than vti. Sky and hd plus did not work at all. Reinstalled vti with oscam, gave up on hd plus.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

The most probable that some small detail is missed in the settings (config files). Have you checked B parameter in mg_cfg file? What is it in your settings?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

Read the thread re: VU+ receivers again and again. I hope, you will find answer to your issue there. Issues are similar. It can't be so that only you have problems with your receiver.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

I know, but I have wasted way too much time with this now - not really worth the one dollar. The other services are working, which is important. Thank you for your help.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

So, we have to tell you "bye-bye, we'll miss you"? Why, then, you made up your mind to leave that service? because of the one dollar? Or, do you think, you just connected and everything must work immediately and without any troubles?
OK, your business.
Tomorrow, all our communication messages will be deleted not to litter the forum.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

marcelmmx

No, you misunderstood - I am not leaving - I just don't want to spend more time trying to resolve the HD plus problem (that is the one dollar). Currently I am using also Skylink and Sky De, which are working fine and I intend to continue using these services. Regards.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

xtruex

For vu+, I recommend OpenPLi-3.0 image + 1.35a mgcamd
http://openpli.org/
ICQ:290344
Бесплатный тест
[url="http://www.cardsharingserver.com/index.php?module=test"]http://www.cardsharingserver.com/index.php?module=test[/url]

marcelmmx

->xturex - that is exactly what suma recommended - I tried both PLI 3 and 4 with mgcamd - nothing works. I have read tons of comments on your forum, tried differend mgcamd modules from the recommended links, adjusted all parameters and settings as people recommended - nothing works. Going back to my original config - VTI image + oscam - here at least SKY DE and Skylink work, HD Plus does not.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

One more advice - if you use ignore and priority lists from our server, remove them and restart emulator. What will happen then?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here [url="http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140"]http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140[/url]
2. ignore-priority.lists here [url="http://www.cardsharing.cc/index.php?topic"]http://www.cardsharing.cc/index.php?topic[/url]

xtruex

ICQ:290344
Бесплатный тест
[url="http://www.cardsharingserver.com/index.php?module=test"]http://www.cardsharingserver.com/index.php?module=test[/url]

marcelmmx

Suma - Now using VTI 6.0.1. with mgcamd - I deleted the files - I think it is the same - however, sound seems to work fine on all channels.
From the HD Plus package RTL 2 HD, SIXX HD and Sport1 HD are not working - the other programs work.
Also many of the Sky DE programs stopped working (e.g. Cartoon Network, Boomerang, Disney Junior and XD, Fox HD, Sky Cinema HD...)
With oscam Sky and Skylink work HD plus does not.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus