Hello,
Are there any problems with Poland Vip Package today? I have several clients with no TV. I have checked the connection logs and all decodings being rejected. Any reasons for that?
Thanks
Same over here.
also have a problem. All Requests are rejected
Same here. All Requests are rejected
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver. Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site). Older versions do not support CAID 1813.
Other emulators: 1) check ignore list and delete CAID 1813 if present. 2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection. Or install and use another emulator.
Hi please tell me if I using cccam and dont work i must change for oscam??
BR Piotr
Quote from: suma on 22 February 2021, 17:27:28
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver. Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site). Older versions do not support CAID 1813.
Other emulators: 1) check ignore list and delete CAID 1813 if present. 2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection. Or install and use another emulator.
The correct ident is 1813:000068 not 1813:000000 - this is wrong and nothing is working black screen with rejected message.
Please correct this on your side because server is reporting 1813:000000
Quote2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 083E PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 4-1-2019
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 083E PROVID: 000068
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 08A2 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 0870 PROVID: 032A00
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1884 ECM_PID: 0906 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 found 5 ECM pids and 7 STREAM pids in CA PMT
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1813 PROVID 000068 ECMPID 083E ANY CHID PMTPID 03F2 VPID 00A9
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (33 ms) by z - CANAL+ SERIALE HD
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (2 ms) by z - CANAL+ SERIALE HD
- Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.
I change for oscam emulator and config actual settings and still not working black screen still.
I have the same problem. OScam switched everything.
Quote from: suma on 22 February 2021, 17:27:28
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver. Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site). Older versions do not support CAID 1813.
Other emulators: 1) check ignore list and delete CAID 1813 if present. 2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection. Or install and use another emulator.
Приставка Openbox AS2 HD
плагин XcamClient3 (OSCam Config)
протокол newcamd/mgcamd
Что надо изменить, чтобы принимать VIP Poland?
Hello,
I'm using CCcam 2.3.2-de (arm) canal+ programs not working (Requests rejected).
Nothing will work until they'll fix ident on server.
Right now they are sending 1813:000000 card to users but channels are working with 1813:000068
(https://i.postimg.cc/9Fn8yvsH/Przechwytywanie.png)
edit:
Fixed, ident 000068 added, everything is working right now.
'- Emulator Cccam (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers working on new patch.'
Update https://www.cardsharing.cc/index.php?topic=35831.new#new
Hi, i did update configs from the billing, but work only few programs. I dont have in my config file parameter "ident". When i added it as user suma wrote, evertything stops... Can enyone help me??
Here is my config file:
[reader]
label = "main_cardsharing.cc_XXX07"
protocol = cccam
device = server_175,XXX07
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068
[reader]
label = "backup_cardsharing.cc_XXX07"
protocol = cccam
device = server_39,XXX07
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068
fallback = 1
Sprobuj w Ident wpisac
1813:00006A
Niestety także nic nie działa...
u mnie i u kolegi pomoglo....moze dekoder wylacz i zalacz ponownie
Też nie to, jak usunę ident to działa ttv,wp i parę innych jak wpiszę cokolwiek w ident to nic nie działa...
Spróbujcie jeszcze ustawień OsCam.
https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782
Na MgCamd'zie nic nie działało, OsCam ruszył.
DM8000HD, OpenPLI 8.0
Quote from: piwo681 on 23 February 2021, 11:42:31
Here is my config file:
[reader]
label = "main_cardsharing.cc_XXX07"
protocol = cccam
device = server_175,XXX07
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068
Maybe this is the reason - cccam protocol?
Try to use
newcamd protocol with oscam emulator.
Must look like this:
[reader]
label = "main_cardsharing.cc_port"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,port
user = username
password = password
group = 1
audisabled = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
inactivitytimeout = 300
ident = 1813:000000,000068
With newcamd protocol is the same sytuation as cccam works only a few programs. I've copyed config from the billing and there was ident = 1813:000000,000068.
Quote from: piwo681 on 23 February 2021, 15:18:39
With newcamd protocol is the same sytuation as cccam works only a few programs. I've copyed config from the billing and there was ident = 1813:000000,000068.
You have rules violation. Check it in your connections history (billing).
1. You have 2 active emulators: Oscam and Cccam 2.3.0. Disable (or delete) Cccam emulator and don't use it.
2. Your receiver is sending EMM requests to the server. It is prohibited by the rules. You have to disable EMM requests sending in your emulator (Cccam). For cccam, it is required to specify parameter DISABLE EMM : yes in CCcam.cfg file (Cccam). For Oscam emulator, in [dvbapi] section, parameter au = 0 of your oscam.conf file (Read update- it is recommended to delete this parameter at all).
So, follow all we recommend for our users and everything will be OK.
Ok the solution is to update Oscam. I've dowlnoaded and install
https://www.enigma2.net/softcam-oscam-11572/
and everything works :) Thanks for your time.
Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol
Quote from: piwo681 on 23 February 2021, 16:06:00
Ok the solution is to update Oscam. I've dowlnoaded and install
https://www.enigma2.net/softcam-oscam-11572/
and everything works :) Thanks for your time.
Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol
Sorry, I'm giving up here :'(
Downloaded and installed this oscam, edited all the files with text from my subscription and still nothing at all....
my oscam.server looks like this:
[reader]
label = "main_cardsharing.cc_20207"
protocol = cccam
device = server_45,20207
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
[reader]
label = "backup_cardsharing.cc_20207"
protocol = cccam
device = server_291,20207
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
fallback = 1
Even went the extra mile and installed OpenATV 6.4 from scratch on my zgemma.
Can someone help please!
Do I need to add any extra lines to this?
Thanks
Try other image
@zelekmanc
Keep it simple as possible.
It's pointless to enter ident or disabling cw check (it's global parameter in oscam config)
Quote[reader]
label = main
protocol = cccam
device = host,port
user = login
password = password
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1
[reader]
label = backup
protocol = cccam
device = host,port
user = user
password = password
inactivitytimeout = 30
fallback = 1
group = 1
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1
@suma
I have changed Mgcamd/OSCAM on Linux based boxes. I have two questions.
1. Is there solution for Amiko boxes (MIRA, MINI HD, etc.), I mean will they work with Mgcamd?
2. If they wont be working is there an option to change from NC+ to Cyfra+, and will be Cyfra+ working on Amiko boxes or will I be facing the same issue like with NC+? I did it in past and you changed the provider for me but I cant find way how to private message you. It would be for 4 accounts.
Quote from: suma on 23 February 2021, 17:17:43
Try other image
Not sure what else I can try...
Installed a completely new image - Openvix 5.4 for zgemma H9S
Installed the latest Enigma OSCAM 11686 and replaced files with info from my billing boxes:
/etc/CCcam.cfg
/var/keys/cccamd.list
/etc/tuxbox/config/oscam.server
/etc/tuxbox/config/wicardd.conf
Activated oscam, restarted everything a thousand times, still no channels.
Have I missed anything? Had this subscription for many years now with no problems previously
Any help much appreciated!
I am with same problems. I update files as required, save changes and restart box. I cannot find even one working channel. I read others and it is just same here.
Any quick fix? Decoder zgemma h9 twin
Quote from: zelekmanc on 23 February 2021, 23:19:18
/etc/CCcam.cfg
/var/keys/cccamd.list
/etc/tuxbox/config/oscam.server
/etc/tuxbox/config/wicardd.conf
To my mind, you have a lot of unnecessary installed in your receiver which prevents from using one emulator with one protocol.
Reinstall image and start from the very beginning, installing only one emulator.
Please remember that
Quote from: suma on 23 February 2021, 05:22:05
Update
- Cccam emulator (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers are working on new patch.
Quote from: kohut17 on 23 February 2021, 18:13:19
@suma
I have changed Mgcamd/OSCAM on Linux based boxes. I have two questions.
1. Is there solution for Amiko boxes (MIRA, MINI HD, etc.), I mean will they work with Mgcamd?
Address your question to Amiko support.
Quote from: kohut17 on 23 February 2021, 18:13:19
2. If they wont be working is there an option to change from NC+ to Cyfra+, and will be Cyfra+ working on Amiko boxes or will I be facing the same issue like with NC+?
NC+
= Cyfra+ (Cyfra+ is the old name of NC+ package)
Quote from: kohut17 on 23 February 2021, 18:13:19
you changed the provider for me
Sorry, we did not change provider for you or for anybody else. It's your personal choice whether to change provider or not.
Hi,
And what to do if I have Amiko NeoCombo SE receiver (it's not linux box) and after update Polish channels don't work? I'm using Cccamd emulator which is working for all packages, but now 2-3 days Polish TV is not working.
As a matter of interest I took a test from other cardsharing provider and all polish channels work normally, do you have any advice, how could I update settings?
Thank you and regards.
Quote from: zelekmanc on 23 February 2021, 17:15:27
Quote from: piwo681 on 23 February 2021, 16:06:00
Ok the solution is to update Oscam. I've dowlnoaded and install
https://www.enigma2.net/softcam-oscam-11572/
and everything works :) Thanks for your time.
Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol
Sorry, I'm giving up here :'(
Downloaded and installed this oscam, edited all the files with text from my subscription and still nothing at all....
my oscam.server looks like this:
[reader]
label = "main_cardsharing.cc_20207"
protocol = cccam
device = server_45,20207
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
[reader]
label = "backup_cardsharing.cc_20207"
protocol = cccam
device = server_291,20207
user = user
password = password
group = 1
cccversion = 2.3.0
audisabled = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
fallback = 1
Even went the extra mile and installed OpenATV 6.4 from scratch on my zgemma.
Can someone help please!
Do I need to add any extra lines to this?
Thanks
Try to use newcamd config, for me it works.
Quote from: monteedeluxe on 24 February 2021, 10:31:22
Hi,
And what to do if I have Amiko NeoCombo SE receiver (it's not linux box) and after update Polish channels don't work? I'm using Cccamd emulator which is working for all packages, but now 2-3 days Polish TV is not working.
As a matter of interest I took a test from other cardsharing provider and all polish channels work normally, do you have any advice, how could I update settings?
Thank you and regards.
Quote from: suma on 23 February 2021, 05:22:05
Update
- Cccam emulator (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers are working on new patch.
- Other emulators: 1) check ignore.list and delete CAID 1813, if any. 2) Some non-linux receivers - you need to delete reader (server) and to setup it again. 3) Some boxes with Xcam emulator - you will need to delete all servers and file /var/etc/protect/xcam in the box via ftp and setup new connection. Or install and use other emulator.
Hej,
wystarczy w oscam .server wpisać dane dla newcamd.
Czyli: Show settings for Newcamd protocol
I w oscam.server wklejamy dane z: Settings for emulator OSCAM for Newcamd protocol
Save
Restart oscam
Sprawdzone na 3 dekoderach zgemma.
Pozdro!
Hello.
During searching in files I found oscam.server.old file. Will I need to delete this file or it have nothing to current situation?
I still cannot find problem here. Hope someone will sort it out and give some advice.
Regards
Just a quick question. Is there any other recommended plugin to use? Oscam for Newcam is used at the moment.
Quote from: Renifer1987 on 24 February 2021, 17:02:40
Just a quick question. Is there any other recommended plugin to use? Oscam for Newcam is used at the moment.
https://www.cardsharing.cc/index.php?topic=35831.msg131902#msg131902
Kojarzysz może jak zmienić w zegmmie (pure2 6.3) z cccam na oscam? Próbuje znajomemu na odległość to ogarnąć, a nie mam dostępu do zegmmy :(
Quote from: tomifranco on 24 February 2021, 15:23:19
Hej,
wystarczy w oscam .server wpisać dane dla newcamd.
Czyli: Show settings for Newcamd protocol
I w oscam.server wklejamy dane z: Settings for emulator OSCAM for Newcamd protocol
Save
Restart oscam
Sprawdzone na 3 dekoderach zgemma.
Pozdro!
Ok ogarnięte nie było tematu :D
Ok guys so I do double-check and I noticed that value for SNR is zero. Is that signal range? Could it be a reason?
Anyway I do as was described in solution but I want to ask... Shall I wipe out all data from oscam.server and then just paste data from billing or just wipe out readers for newcamd and paste billing one?
Quote from: Renifer1987 on 24 February 2021, 22:56:00
Ok guys so I do double-check and I noticed that value for SNR is zero. Is that signal range? Could it be a reason?
Anyway I do as was described in solution but I want to ask... Shall I wipe out all data from oscam.server and then just paste data from billing or just wipe out readers for newcamd and paste billing one?
SNR - Signal Noice Rate - signal-to-noise ratio, the value specifying strength and quality of the signal received from satellite.
Channels with SNR 0% are either not available at the particular frequency, or your dish has turned away from the satellite by several degrees (something like that), or weather conditions (totally cloudy). Try to rescan satellite. If SNR remains 0%, then call for a specialist (or do it by yourself) to fine tune your dish
It seems to be right. I have no signal from dish. Recent weather was bad. Possible that dish moved and lost signal. Thanks Suma for explaining.
All works after fixing signal from dish
Thanks for advices and everything. Another happy customer.
hi,
Emulator Cccam (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers working on new patch.
when will there be a fix for cccam ???
Witam. Szukam pomocy dla Open box sx6. Obecnie miałem wtyczkę wicard. I przestała działać. Wie ktoś jak to teraz naprawić po tej zmianie ?
Does this channel Canal+ 1 HD work ? For several days, this channel has not been working for me . I use oscam and everything worked fine but this channel has not been working for a few days.
Quote from: kros on 03 July 2021, 16:58:33
Does this channel Canal+ 1 HD work ? For several days, this channel has not been working for me . I use oscam and everything worked fine but this channel has not been working for a few days.
https://www.cardsharing.cc/index.php?topic=9566.0
P.S. There is no such user "kros" in the billing. Provide your actual information.
The channel is working already today :D Thanks for the answer ;)
hi Suma, can you check the functionality of CANAL + SPORT 2 HD in the NC + package? everything else is going perfectly fine, thanks.
jkmusic
Hi, any log-file?
hi, it's running ;)
jkmusic
Ja mam dekoder Ariva 4k , niestety na Androidzie. Nie mam możliwości,żeby zmienić na Oscam. Jest jakaś możliwość,żeby to obejść? Mam najnowszego firmware'a i mcam z 25.01.2017