Hello. Skylink has added two stations with CAID 0624....
Programy Kompresní formát Satelit Astra Frekvence (MHz) Polarizace Symbolová rychlost (KS/s) FEC Norma Pilot FastScan
iConcerts HD MPEG-4 23,5°E 12 032 H 27 500 9/10 DVB-S2/QPSK OFF 181
C Music TV MPEG-4 23,5°E 12 090 V 29 900 2/3 DVB-S2/8PSK OFF 180
They will work for You.
They haven't come...
Thank you
Will CAID 0624 work with you?
Now dark :-\
ICE cards works with CAID 0624 in "IRDETO mode" ..... will you switch?
Can anyone else confirm that?
CAID 0624 is working with Cccam, today it will be added to Newcamd
CCCam via MgCamd 1.45 does not work C Music TV
iConcerts HD also no :(
New channels will be added later
tnx suma
Another one for testing 0624 by Skylink (23,5°E +19,2°E):
Insight UHD & - Astra 19,2°E 12 344 H 2/3 30 000 DVB-S2 / 8PSK Pilot Off SID 2000 / VPID 255 MPEG-H/H.265/HEVC
HD version was also tested originally.
Also does not work:
Brazzers TV: 19,2°E 12 515 H 5/6 22 000 DVB-S / QPSK (10pm-5am middle europe winter time)
But here should be 0D96 connected.
https://www.cardsharing.cc/index.php?topic=35052.0
From Irdeto port, only С Music channel is working.
iConcerts HD channel from 12032 is not decoded by our cards yet, and iConcerts SD was removed from 12090 V with its SID used for С Music CZ channel at this time.
Briefly speaking, iConcerts SD was removed and iConcerts HD is not working with our cards yet.
Official web-site https://zona.skylink.cz/web/clientShop/products, there is no information about iConcerts HD. It says that only SD channel is included.
The other page https://www.skylink.cz/program/stingray-iconcerts provides the HD channel frequency 12032 which cannot be opened by our cards.
So, we'll have to wait until they make everything clear and stable. Only then, we'll be able to do something.
Hi,
from yesterday to see the picture freezes - Skylink.
I use the cccam protocol.
Is it related to adding CAID 0624?
Quote from: yare on 06 January 2018, 19:20:43
Hi,
from yesterday to see the picture freezes - Skylink.
I use the cccam protocol.
Is it related to adding CAID 0624?
https://www.cardsharing.cc/index.php?topic=35052.0
Sorry. I wrote incomplete information.
So :
JOJ Family HD - OK
Wau - freeze
JOJ Plus HD - OK
TV JOJ HD - OK
Markiza HD - freeze
STV1 - freeze
STV2 - freeze
Dajto HD - OK
Doma HD - freeze
CT1 HD - freeze
CT2 HD - freeze
Prima HD - OK
NatGeoWild - freeze
etc.
Can anyone else confirm this?
No problems here, nor my parents or my friend, we all are using dreambox 525HD with CCcam 2.3.0, Skylink HD 23.5E, OE 2.5 Newnigma firmware. Caid 0624 is working with no freezes. I suggest to test other images/emulators.
I tried everything... I changed the domain name to IP.
So far, it's OK. Tomorrow I change the IP to a domain name and see ...
I changed IP address of server to a domain name and everything is ok.
So I do not know where the bug was.
It's not a bug, it's specifics of your receiver. Some receivers, instead of domain names, require adding IP addresses and v.v.
I Corcent work, nice ;D
I can confirm that iConcerts is working now. Thank you!
It seems, that Skylink is going to cut down Cryptoworks CAID 0D96 gradually and it will be switched off for all channels eventually. We can expect that all newly added channels will use Irdeto and Viacess (0624 and 0500) only.
As a fresh example:
Seznam.cz HD: 23.5°E 12070/H 3/4 27500 DVB-S/QPSK --- CAID 0624, 0500 (geoblocked for CZ region)
I do not know ... Until 06.01.2018 I used the domain name server setup. Then problems with some channels have occurred. I changed the domain name of the server to the IP address. All channels were okay. So I changed the IP address again to a domain name and all the channels are also ok.
IConcertsHD
Skylink has changed the Channel ID of the originally non funkcional A000 on the usual 0000 and started to walk. :)
We can wait the same for SeznamHD
Today (05. 02. 2018) another station with only CAID 0624 has been added to Skylink: Travel XP HD.
At this time we have 3 Skylink stations that are not accesible by cardsharing:
TravelXP HD: 23,5°C 12109/H 27500 3/4 DVB-S2/8PSK
Seznam.cz HD: 23.5°E 12070/H 27500 3/4 DVB-S/QPSK (blocked for SK region, allowed for CZ region - sorry for my mistake in previous post)
Insight TV HD: 19,2°E 11229/V 22000 2/3 DVB-S2/8PSK
Any chance to have them added in your service?
At the moment, no news. Solution was not found yet
Hi,
I use cccamd.list for mgcamd 1.35a a parameter in mg.cfg G: { 32 }.
Seznam.cz HD: 23.5°E 12070/H 27500 3/4 DVB-S/QPSK
Insight TV HD: 19,2°E 11229/V 22000 2/3 DVB-S2/8PSK
Work for me.
But TravelXP HD: 23,5°C 12109/H 27500 3/4 DVB-S2/8PSK dosnt.
Is it possible for Slovakian users to go to "Seznam.cz" and not to Czech users? :(
Quote from: silvercord on 05 February 2018, 21:22:46
Hi,
I use cccamd.list for mgcamd 1.35a a parameter in mg.cfg G: { 32 }.
Seznam.cz HD: 23.5°E 12070/H 27500 3/4 DVB-S/QPSK
Insight TV HD: 19,2°E 11229/V 22000 2/3 DVB-S2/8PSK
Work for me.
But TravelXP HD: 23,5°C 12109/H 27500 3/4 DVB-S2/8PSK dosnt.
Thank you, silvercord, with Cccam protocol it's working.
Quote from: otava5 on 05 February 2018, 23:07:46
Is it possible for Slovakian users to go to "Seznam.cz" and not to Czech users? :(
https://www.cardsharing.cc/index.php?topic=34083.0
Yes you have czech cards, so why it's not working for him(SeznamCZ) if he's from czech republic? I was making some research: Skylink package - parents, SVK region, DM525, CCcam 2.3.0 - SeznamCZ/insightHD INT not working. Me, SVK region, VIP czech, same setup - SeznamCZ/insightHD INT - is working. So I guess you have something else setup on vip czech than on Skylink packge. I know Skylink package is part of VIP czech but it's all working here, no geoblock. Except ofcourse TravelXP. It won't work cause it has ident 0624, A000 instead of 0000 and universal card reader block, layer2b .. support of stat. camkey is disabled. I hope you can overcome this.
Quote from: nopez on 06 February 2018, 09:19:47
Yes you have czech cards, so why it's not working for him(SeznamCZ) if he's from czech republic?
I will repeat again -
Solution was not found yetIs it not sufficient? If you have no patience, address all your questions to Moderator directly. You will receive the same reply.
I confirm.
"Seznam.cz" is already working on VIP Czech CCcam protocol, newcamd does not work ... Thanks nopez
suma: Please correct the Skylink CZ packet
thnx
For example:
TLC in "VIP Czech" you have in Irdeto and in "Skylink CZ" you have Cryptoworks ...
Strange :(
GOOD MORNING!!!!!!!!!
https://www.cardsharing.cc/index.php?topic=18962.msg125992#msg125992
It was published not today and not yesterday... Open your eyes, people!
Oh, they want to force us to pay VIP Czech ;D
suma: please contact to admin....thnx
edit: "With disabled Cryptoworks encryption with CAID 0D96, we will transfer channel decoding to Irdeto cards with CAID 0624."
In "Skylink CZ" in disabled... In "VIP Czech" yes....You see it ;D
repair:
In "Skylink CZ" in NOT disabled... In "VIP Czech" yes....You see it ;D
SkyLink is disabling CAID 0D96 not at once and not immediately for all channels, but GRADUALLY, one by one.
Moderator is transferring the channels not immediately, but gradually, too. What shall I see?
In the News and Announcements, it was clearly stated Clients connecting CS using cccam protocol, no changes are required! Clients connecting CS using newcamd protocol are requested to connect to the newly created port specified in the billing, "My subscription" section.
So, check your subscriptions data in the billing and, if necessary, make amendments in your receiver settings.
suma / admin:
especially in the future with CAID 0624 it works VIP Czech ... I do not care about the dollar ...
Thank you
"Seznam.cz" is working now
Quote from: silvercord on 05 February 2018, 21:22:46
Insight TV HD: 19,2°E 11229/V 22000 2/3 DVB-S2/8PSK
Work for me.
Question: Where did you find Insight TV HD at
19.2E 11229/V in SkyLink package? As far as I know, SkyLink is broadcasting from
23.5 Astra 3B.
According to KingOfSat, http://en.kingofsat.net/find.php?question=Insight+TV+HD the channel belongs to Sky Deutschland and HD+ (also German package). Where did you find the channel in SkyLink? And how does it work for you? Can you provide log-file?
P.S. Insight UHD will not work for you because, as I understand, you have no 4K receiver.
Quote from: silvercord on 05 February 2018, 21:22:46
But TravelXP HD: 23,5°C 12109/H 27500 3/4 DVB-S2/8PSK dosnt.
TravelXP HD will not work because it has provID
0A00 , whereas all other channels have provID
0000.
We cannot interfere with provider actions. Eg. From the beginning, Seznam.cz had ProvID 0A00. They (provider) changed it to ProvID 0000 and the channel started working by itself.
We did nothing.
The same story with
TravelXP HD. Currently, the channel has ProvID 0A00. If/or when provider changes it to the ProvID 0000, the channel will start working by itself.
As
nopez mentioned some posts above,
Yes you have czech cards, so why it's not working for him(SeznamCZ) if he's from czech republic? I was making some research: Skylink package - parents, SVK region, DM525, CCcam 2.3.0 - SeznamCZ/insightHD INT not working. Me, SVK region, VIP czech, same setup - SeznamCZ/insightHD INT - is working. So I guess you have something else setup on vip czech than on Skylink packge. I know Skylink package is part of VIP czech but it's all working here, no geoblock. Except ofcourse TravelXP. It won't work cause it has ident 0624, A000 instead of 0000 and universal card reader block, layer2b .. support of stat. camkey is disabled. I hope you can overcome this.we cannot overcome this. This is not our responsibility to change ProvID. Provider and only provider is doing such things. And stop blaming our server that we cannot do this! I will repeat again - this is out of our responsibility. The card available is decoding everything which is possible. You may give your advices to somebody else, but not to Moderator. He is much clever than you think.
https://www.skylink.sk/program/insight-hd (https://www.skylink.sk/program/insight-hd) Insight HD INT is part of Skylink package. Same goes with MTV Hits, Dance, Rock, VH1, VH1 Classic, Brazzers etc. These channels are transmitting on 19.2 and are part of Skylink. I can open those channles with your vip package. I'm not blaming anybody, I'm fine with your answer. I don't know how to provide log file with cccam emulator, sorry.
All channels transmitted from other satellites are considered the third-party channels, i.e. they do not belong directly to SkyLink provider, they are just re-translated from other satellites. In fact, they may have their own SIDs, Chids, ProvIds, etc.
Re: log-file refer to https://www.cardsharing.cc/index.php?topic=26069.0
Skylink pridal 2 stanice Travel xp a outdoor chanel. Zatial nejdú. Ako sa to rieši ? Rastoba7
rastobal: https://www.cardsharing.cc/index.php?topic=35048.msg126332#msg126332
A000 Game Over ;D
Outdoor channel is not new, it's just on the new frequency with higher layer of security for now (A000). TravelXP is back on 0000 I guess, cause it works for me right now.
Outdoor Channel on a new frequency and TravelxpHD are already working (VIP Czech/mgcamd/Cccam protocol).
:D
Please add Cartoon Network
https://www.skylink.cz/novinky/90cs-cartoon-network-novy-program-v-nabidce-skylinku
THNX...
Quote from: otava5 on 01 March 2018, 15:09:13
Please add Cartoon Network
https://www.skylink.cz/novinky/90cs-cartoon-network-novy-program-v-nabidce-skylinku
THNX...
Added
Please help, i bought skylink cs package, in my receiver mecool kiii pro i setup 2 servers(main+backup) with 2 port (XXX32,XXX34) but iConcerts HD and C-Music not function. What do you do to make it work? Thank you.
Quote from: dimi256 on 03 March 2018, 11:44:24
Please help, i bought skylink cs package, in my receiver mecool kiii pro i setup 2 servers(main+backup) with 2 port (XXX) but iConcerts HD and C-Music not function. What do you do to make it work? Thank you.
First of all,
remove those ports, it's against the rules. Those channels are currently working fine on my end.
https://www.cardsharing.cc/index.php?topic=9566.0
i changed from newcamd to cccam and restart my receiver and now channel is ready. Sorry for my previous post. :)
please add:
PRIMA KRIMI
satellite: Astra 3B (23.5 ° E)
frequency: 11.876 GHz
polarization: horizontal
SR: 29900
FEC: 3/4
standard: DVB-S2
modulation: 8PSK
service ID: 13212
video PID: 7221 (MPEG-4 / SD)
Audio PID: 7222 (MPEG)
CA system: Irdeto (CAID 0624), Viaccess Orca (CAID 0500/051910)
https://www.parabola.cz/clanky/6352/prima-krimi-zarazena-do-nabidky-skylinku/ (https://www.parabola.cz/clanky/6352/prima-krimi-zarazena-do-nabidky-skylinku/)
Thnx :)
Hello please add Prima Krimi is on air ...
Thnx
Moderator WAS notified as soon as you asked for the first time.
Added
thnx...is works :)
Hello,
I have HDBOX 9200, OSCAM 1.20-unstable_svn build r8641, at channel Prima Krimi the Oscam says "ERROR: Can't decode channel". I try newcamd and cccam also.
Is it possible to decode Prima Krimi (and others CAID 0624) at my configuration?
Thanks for any help.
https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782
Read and compare - how your Oscam is configured.
I have detailed log for Prima Krimi (after system refresh by oscam tips):
2018/04/04 20:20:16 565780 c Found 2 ECMpids and 4 STREAMpids in PMT
2018/04/04 20:20:16 565780 c New program number: 339C (0624:339C unknown) [pmt_list_management 3]
2018/04/04 20:20:16 565780 c [IGNORE PID 0] 0624:000000:1C3E (file)
2018/04/04 20:20:16 565780 c no match, 0500:051910 rejected by reader '"main_cs_1"' filters
2018/04/04 20:20:16 565780 c r-filter reader "main_cs_1"
2018/04/04 20:20:16 565780 c no match, 0500:051910 rejected by reader '"main_cs_2"' filters
2018/04/04 20:20:16 565780 c r-filter reader "main_cs_2"
2018/04/04 20:20:16 565780 c [IGNORE PID 1] 0500:051910:1C40 (no matching reader)
2018/04/04 20:20:16 565780 c try pids again #1
2018/04/04 20:20:16 565780 c try pids again #2
2018/04/04 20:20:16 565780 c try pids again #3
2018/04/04 20:20:16 565780 c ERROR: Can't decode channel
Readers are configured exactly as my subscription page says.
Why oscam tries to call 0500:051910 instead of 0624:000000? Thanks for any other help.
There are only 2 readers for SkyLink (total 4, if we count with back-up server)
[reader]
label = "main_cardsharing.cc_XXX32"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXX32
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0D96:000004
[reader]
label = "main_cardsharing.cc_XXX34"
protocol = newcamd
key = 0102030405060708091011121314
device = servXX.com,XXX34
user = login
password = password
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0624:000000
I do not know why your emulator cannot connect 0624 reader. Something is wrong with your config-files, because emulator takes all information from oscam.server file.
Be sure that you do not use any other emulators with respective settings (Mgcamd with ignore-priority lists), etc. If you use Oscam, you have to use only Oscam, nothing else. All other emulators and their respective config-files shall be deleted with further restart of receiver.
Hello
I using Acamd and not working PrimaKrimi
I have error: NewCamd: ECM 1F95 062/00000000 not able to decode.
Do you know wheree is the problem?
Quote from: henrix55 on 23 April 2018, 20:51:34
Hello
I using Acamd and not working PrimaKrimi
I have error: NewCamd: ECM 1F95 062/00000000 not able to decode.
Do you know wheree is the problem?
Hi,
The problem is that you visit billing (cardsharingserver.com) not too much often...
I doubt that you even know that there are 2 ports for SkyLink (new port is available for half-year so far. I am sure, you are connected the only port.
Check your settings and compare to those provided in the billing and add new port for SkyLink
Quote from: yare on 09 January 2018, 23:00:10
I tried everything... I changed the domain name to IP.
So far, it's OK. Tomorrow I change the IP to a domain name and see ...
Prosim ta ako a kde zmenim IP adresu na domenove meno ? Mam ten isty problem. VU zero 4k enigma 2 vti 13.0.9 ,
Oscam 11086.
V konfiguracnom subore. Namiesto domenoveho nazvu som dal IP adresu. Ale podla mna v tom chyba nebola, pretoze som to potom vratil spat a islo to aj s domenovym menom.
SkyLink is moving many channels to the new parameters.
At the moment they are already on air with CAIDs 0624, 0D96, 500 (...) but decoded are in 0D06 only by your service.
So I just want to remind you to add these new channels to the 0624.
Thanks.
Skylink Channels with new parameters:
Retro Music TV 11739 MHz/V 2/3 29900 DVB-S2 / 8PSK
E! Entertainment CZ 11739 MHz/V 2/3 29900 DVB-S2 / 8PSK
Nautical HD 11856 MHz/V 2/3 29900 DVB-S2 / 8PSK
duck TV 11934 MHz/V 3/4 27500 DVB-S2 / 8PSK
AMC 11934 MHz/V 3/4 27500 DVB-S2 / 8PSK
Filmbox Extra HD 11934 MHz/V 3/4 27500 DVB-S2 / 8PSK
Disney CZ 11934 MHz/V 3/4 27500 DVB-S2 / 8PSK
TV Paprika 11934 MHz/V 3/4 27500 DVB-S2 / 8PSK
Mnam TV 11973 MHz/V 2/3 29900 DVB-S2 / 8PSK
KinoSvet 11973 MHz/V 2/3 29900 DVB-S2 / 8PSK
Golf Channel 11973 MHz/V 2/3 29900 DVB-S2 / 8PSK
Nickelodeon CZ 12070 MHz/H 3/4 27500 DVB-S / QPSK
JOJ Cinema +1 HD novy 12070 MHz/H 3/4 27500 DVB-S / QPSK
Sport 5 12090 MHz/V 2/3 29900 DVB-S2 / 8PSK
Sport 2 HD 12090 MHz/V 2/3 29900 DVB-S2 / 8PSK
Discovery CZ 12110 MHz/H 3/4 27500 DVB-S2 / 8PSK
Film+ 12129 MHz/V 2/3 29900 DVB-S2 / 8PSK
Filmbox Plus 12129 MHz/V 2/3 29900 DVB-S2 / 8PSK
Filmbox Premium 12129 MHz/V 2/3 29900 DVB-S2 / 8PSK
UP NETWORK CZ 12129 MHz/V 2/3 29900 DVB-S2 / 8PSK
Prima +1 HD novy 12344 MHz/H 2/3 29900 DVB-S2 / 8PSK
Moderator is notified.
For your information:
SkyLink package will be shared using CAID 0D96 ONLY until it's subscription is finished. Only those channels which are not working with CAID 0D96 will be shared with CAID 0624.
We will not share SkyLink in both encryptions at once, because receivers available among our users are sending requests to the server for 2 encryptions at once. As a results, they are banned by the server for cascading.
Are the above channels working? I think, they are working. For you, the issue of encryption shall not be a problem, if your have normal receiver.
I have a strange issue.
When I setup the first reader with ident = 0D96:000004, I can't decode programs with Cryptoworks. Only when I change the ident = 0D96:000000,000004 decoding on the first reader with Cryptoworks (0D96) on port 20032 is working fine. New programs like Seznam.CZ working properly with IRDETO decoding on second reader on port XXX34.
Have you seen something similar?
Original setup:
[reader]
label = "main_blablabla_XXX32"
protocol = newcamd
key = 0102030405060708091011121314
device = blablabla,XXX32
user =
password =
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0D96:000004
[reader]
label = "main_blablabla_XXX34"
protocol = newcamd
key = 0102030405060708091011121314
device = blablabla,XXX34
user =
password =
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0624:000000
Working setup:
[reader]
label = "main_blablabla_XXX32"
protocol = newcamd
key = 0102030405060708091011121314
device = blablabla,XXX32
user =
password =
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0D96:000000,000004
[reader]
label = "main_blablabla_XXX34"
protocol = newcamd
key = 0102030405060708091011121314
device = blablabla,XXX34
user =
password =
group = 1
audisabled = 1
inactivitytimeout = 300
ident = 0624:000000
Vu+ Uno4K SE, BlackHole 3.0.8.0, oscam-1.20_svn-r11469, SkyLink HD 23E subscription with Dual-login option.
Have you checked the billing? Open the billing and compare your settings with those provided in your subscription- newcamd for oscam
P.S. in the very bottom of the page, you will see:
Package SkyLink HD 23E:
Need connect to both ports for full package!
Port XXX32 - Skylink Cryptoworks (ICE) 99% channels
Port XXX34 - Skylink IRDETO, only new channels which not work from Cryptoworks (ICE) cards
Yes, my settings are copied directly from this page. I quoted it in my previous post. But with this setting, for example, the old channel 1F41 doesn't work: 1F41:0624,0D96,0500@051910|CT 1 HD|TV||CESKA TELEVIZE
In log file I can see that the channel is asking for decoding 0624 and not 0D96
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in caPMT
2019/04/15 16:09:15 16E61E4D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2019/04/15 16:09:16 16E61E4D c (ecm) dvbapiau (P: 0624::1F41:0474:0000 #ECM_L:64 #CW=00000000000000000000000000000000 HOP:00): not found (37 ms) by "main_cardsharing.cc_20034" - CT 1 HD
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 found 3 ECMpids and 8 STREAMpids in PMT
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2019/04/15 16:09:16 16E61E4D c (ecm) dvbapiau (P: 0624::1F41:0474:0000 #ECM_L:64 #CW=00000000000000000000000000000000 HOP:00): not found (1 ms) by "main_cardsharing.cc_20034" - CT 1 HD
2019/04/15 16:09:16 16E61E4D c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2
Moderator will check
CT1 HD works without problem with Cryptoworks. Why your OsCam is sending quiries to Irdeto, not to Cryptoworks 0D96 - is a question. Probably, you have to check filters, if any.
The channels which are not broadcasted in Cryptoworks are transmitted in Irdeto.
SIDs: 17AE,1810,3732,339C,339D,07D0,36F5,13B3,17D6,335B,030E,030D,1393,1031
The situation is similar to the one happened to Conax some time ago.
The provider is adding new channels to Irdeto, not to Cryptoworks.
We too, are adding the channels which cannot be decoded with Cryptoworks to Irdeto.
Check you image and compatibility with Oscam emulator. Maybe, you will have to reinstall both image+emulator and put all settings from the very beginning.
OK. I will try. Thank you for help.