Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => Sky UK HD + ViewAsia + ZeeTV 28E => Тема начата: kommando от 15 Августа 2015, 14:12:01
-
I have lost BT Sport before, regained it by rescanning as they had changed transponders but this morning it has gone again but rescanning and rebooting does not bring it back, I am only need BT Sport 2 but the rest of the BT channels are also not decoding. Log files are as follows
For BT Sport 2 C4C7 (and also C4C8)
[mg0] newcamd route ******* cant decode (70ms)
ECM to newcamd ******
Server: -- Sat Aug 15 11:51:02 2015
----------------------------------------------------
80 70 69 00 00 01 0e df 0f 56 72 ff ff 00 81 11 .pi......Vr.....
010: 20 01 00 00 76 56 7e 0a 5d 2c 93 51 a2 b6 7e 5f ...vV..],.Q..._
020: 62 f9 90 48 c0 04 1b d0 ed a4 bf b6 4a 19 46 77 b..H........J.Fw
030: 6d c9 ca 4a 98 1a 39 1e f7 86 e9 58 46 bb c1 8c m..J..9....XF...
040: ff 0c 0b d7 d5 f4 bf 1f 38 5a 30 e4 9c 11 cc 77 ........8Z0....w
050: 63 ae 3f b3 f2 cb 85 0b df e3 85 88 84 9e 23 8c c.?...........#.
060: 6f 3c 16 60 23 31 11 70 79 fe ac e2 o<.`#1.py...
-
Did you perform rescan?
https://www.cardsharing.cc/index.php?topic=33524.msg114633#msg114633
-
it doesnt help...already tried...
-
All BT sport down for me as well. Rescan found new BT Sport HD channels at 11974 Vert but they don't clear. BT Sport 1 SD at 11083 hor will occasionally clear for a few seconds.
-
done all that and still not working. come on suma sort it out
-
same here, all BT channels are not decoded, I tried to re scan still the same.
-
I've tried both the sd and the hd transcoded, no channel is clearing. Maybe the cards are over loaded as this is one of the few times people watch bt. For the early premier league kick off. Edit: bt Europe is clearing ok.
-
Went of at 8.10am UK time for me if it helps. Was watching MotoGP on Sports 2 HD at the time.
-
yes bt sport europe is clearing. its defo problem with server....cause my other server opens all bt channels.
-
Moderator is notified on the issue
-
Been posting to the wrong thread. Summary of my other posts on the wrong thread.
Tried scanning and used all the possible FEC combinations and could not get a channel added, note my box is SD only and the HD in the settings possibly means I cannot use this transponder, plus your packages do not decode HD.
Currently on Lyngsat BT Sport 2 is listed as
http://www.lyngsat.com/tvchannels/uk/BT-Sport-2.html
11082H for SD and 11597V for HD
****************
The rescan of 11082H gave 18 channels including all the BT Sport channels, signal is good and EPG is showing but no decoding.
*****************
11082H would seem to be the correct current SD frequency
http://www.a516digital.com/2015/07/satellite-update-few-more-changes-to.html
This week, some channels, including CNN, Travel Channel, TruTV, Heart TV, Clubland and BT Sport in standard definition are moving from Astra 2F to Astra 2G and new frequencies as the load is balanced across the three new satellites.
11082 H
From 02/07/15
22000
5/6
BT Sport 1, 2, BT Sport Europe in SD
2F
Europe
-
Any chance to see BT sport in this evening ?
-
Hello
I should already work
Please check
-
it does not work :(
-
Warning for Newcamd users - BT Sport is now temporary working only from second port (caid 0960) please add this line to your box.
-
Dumb question, how do we do that ? An extra line in newcamd.list?
-
Dumb question, how do we do that ? An extra line in newcamd.list?
yes. Please get second line in "Settings for emulator MGCAMD for Newcamd protocol" in "My subscription" section and put it to newcamd.list
-
more details please ....i really don't know how to do it.
-
deleted ///
-
Any chance of a workaround for Cccamd users? similar to the newcamd fix you provided?
-
Should I add hash # on the front of old lines or just add new ones under?
Mod-please remove my post above please, thank you.
-
I added 2 new lines and kept the old ones but no joy on BT, the port used is unchanged when it should be picking up the new port.
Channel: Unknown channel (SkyUK)
SID: C4C8 ******
CAID@IDENT: 0963
Aug 15 19:44:04 192.168.1.125 [mg0] newcamd route ******* cant decode (59ms)
Aug 15 19:44:04 192.168.1.125 ECM to newcamd ********
Aug 15 19:44:04 192.168.1.125 Server: -- Sat Aug 15 19:43:42 2015
Aug 15 19:44:04 192.168.1.125 ----------------------------------------------------
Aug 15 19:44:04 192.168.1.125 000: 80 70 69 00 00 01 0e df 0f 95 7a ff ff 00 81 11 .pi.......z.....
Aug 15 19:44:04 192.168.1.125 010: 20 01 00 00 bd 56 7e 0a 96 d2 c4 b6 85 78 70 1e ....V.......xp.
Aug 15 19:44:04 192.168.1.125 020: 76 3f 90 48 c0 04 ea 95 62 95 68 70 da 19 52 b1 v?.H....b.hp..R.
Aug 15 19:44:04 192.168.1.125 030: 86 0a cc 12 5d cb 40 eb 01 50 2f d0 d5 da 50 1d ....].@..P/...P.
Aug 15 19:44:04 192.168.1.125 040: a6 fa 4f ad a9 be a5 79 15 d5 c2 da 5e 5d 0b df ..O....y....^]..
Aug 15 19:44:04 192.168.1.125 050: 79 5e e4 0f 41 47 86 18 68 cd f3 bd 45 ee 6a a3 y^..AG..h...E.j.
Aug 15 19:44:04 192.168.1.125 060: e0 fd 45 1f 5e 85 10 d1 20 9a 8e f1 ..E.^... ...
So maybe the hash is needed, other than BT rest of channels are ok still.
I use DCC 2.96 to connect to the dreambox and then use FTP to go to folder Var/Keys and then right click on Newcamd.list and select edit, you can then add the lines.
-
Any chance of a workaround for Cccamd users? similar to the newcamd fix you provided?
It shoud work for Cccam protocol - no changes needed
-
i just put hash before old lines, ive added new lines and my bt1 and bt2 works now.@kommando softcam reboot is required
-
Well I am connected to both ports as I have left 4 lines without hash as per the subscription page.
Current connections
2 - for port ****1
2 - for port ****2
Maybe connected to CAID 0963 vs CAID 0960.
Recording now so not more testing until the morning.
-
Cccamd, yes both working now, thanks TechGuy.
-
I don't if for you guys working, but on mine does not work , i tried to re-scan but still not decoding.
I am using newcamd and my question is do I still need to add that line in settings?if yes, can you please tell me how do it or at least provide the command line.
thanks in advance.
-
Still getting nowhere, Newcamd was not working so have gone to CCCamd through Mgcamd showing as CCcam 2.0.1 (mgcamd), all other channels as being decoded and still no joy.
Removed all BT channels, rescanned but they still will not decode, port is showing as correct port for CCCamd
Channel: Unknown channel (SkyUK)
SID: C4C8
CAID@IDENT: 0963
For port: ******
Aug 16 09:18:47 192.168.1.125 [mg0] cccamd route ******** cant decode (55ms)
Aug 16 09:18:47 192.168.1.125 ECM to cccamd ******** (00000066)
Aug 16 09:18:47 192.168.1.125 Server: -- Sun Aug 16 09:18:45 2015
Aug 16 09:18:47 192.168.1.125 ----------------------------------------------------
Aug 16 09:18:47 192.168.1.125 000: 81 70 69 00 00 01 0e df 10 42 52 ff ff 00 81 11 .pi......BR.....
Aug 16 09:18:47 192.168.1.125 010: 20 01 00 00 43 56 7e 0a c6 ec 6e ac 01 07 d5 d0 ...CV....n.....
Aug 16 09:18:47 192.168.1.125 020: 76 74 90 48 c0 04 d9 9e bf 48 d3 9e bc 59 b6 04 vt.H.....H...Y..
Aug 16 09:18:47 192.168.1.125 030: 06 ef ee d3 6c 99 f2 77 22 55 45 31 6f dd 3a 3b ....l..w"UE1o.:;
Aug 16 09:18:47 192.168.1.125 040: 29 c4 79 ea 0e e0 a9 44 58 e9 a2 8b 35 66 ce fa ).y....DX...5f..
Aug 16 09:18:47 192.168.1.125 050: 7c 82 cc 8e 7e e4 e0 8b 47 06 53 31 f5 a4 3b 80 ........G.S1..;.
Aug 16 09:18:47 192.168.1.125 060: 67 6f 7c c4 6a a1 ba ae d9 7f c8 5e go..j......^
Aug 16 09:18:47 192.168.1.125
-
Only have option to run OSCam with either newcamd or Cccam. Tried both protocols without success :(
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0963 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0960 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 found 3 ECMpids and 1 STREAMpids in PMT
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 receiver wants to demux srvid C4A5 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 new program number: C4A5 (0963:C4A5 unknown) [pmt_list_management 3]
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
2015/08/16 11:25:53 42F418 c (ecm) tvh (0963&000000/FFFF/C4A5/6C:932C2B476DCD6E3060CD6729D215592E): rejected (100 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01 42F418 c (ecm) tvh (0963&000000/FFFF/C4A5/6C:A5D614464135E50E454A2AADB5AA9127): rejected (2 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01 42F418 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2015/08/16 11:26:01 42F418 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
and so on.......
-
to kommando
1. Don't change newcamd.list, leave it as it is
2. Create cccamd.list in the same directory where newcamd.list and mg_cfg are located
3. Go to the billing, My subscription
4. Under the table with your subscription details, you will see Settings for emulator CCCAM for Cccam protocol. Click settings for Cccam protocol. You will need C line (there are two C lines - with the main and back-up server).
5. Copy both C lines and paste to cccamd.list
6. In mg_cfg file, change G parameter from 01 to 32
7. Note: in your receiver, MgCamd must be active.
8. Reboot MgCamd emulator. That's all you need.
-
Suma, that is not exactly what I did, I still have the Newcamd.list there, I created cccamd.list and added in the lines from the subscription page and edited the Mg_cfg so the network mode changed from 01 Newcamd to 32 cccamd. This works for all channels except for BT and my connections history shows the correct cccamd port from my subscriptions is being used. I did a full reboot as well just to be sure.
Only clue is the Setana channels do not decode either but never use them so do not know if they ever decoded and do not need them anyway.
I followed these instructions
Settings for emulator MGCAMD for Cccam protocol
The configuration file - /var/keys/cccamd.list
In order to make Cccam protocol to be active within mgcamd emulator, it is required to specify G: { 32 } parameter in mg_cfg file. C-lines should be added to /var/keys/cccamd.list file.
-
Yes, quite right.
However, I still see 0963 in your log-file
2015/08/16 11:25:53 42F418 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
2015/08/16 11:25:53 42F418 c (ecm) tvh (0963&000000/FFFF/C4A5/6C:932C2B476DCD6E3060CD6729D215592E): rejected (100 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01 42F418 c (ecm) tvh (0963&000000/FFFF/C4A5/6C:A5D614464135E50E454A2AADB5AA9127): rejected (2 ms) by "##server name##" (F/2/2/2)
when 0960 is required.
Have you checked your ignore and priority lists? Is 0963 present somewhere?
-
Suma
0963 is not in ignore, and is in priority
0960 is in ignore and is not in priority
I only have 2 lines in cccamd.list as I generated it from a blank file, both are C lines
-
That is why you can't decode BT channels.
Replace 0963 with 0960 and vv and restart
-
Thanks, could you confirm then
I need
0960 in ignore but not in priority
0963 in ignore but not in priority
-
Thanks, could you confirm then
I need
0960 in ignore but not in priority
0963 in ignore but not in priority
Vice Versa:
0960 - in priority
0963 - in ignore
-
I will explain for future:
In your log-file, CAID 0963 is rejected. Emulator needs CAID 0960, but it is in your ignore list. It means that CAID 0963 is in your priority.list (if you use priority list). You need to delete CAID 0963 from priority.list and place it to ignore.list for emulator to ignore it.
And, consequently, in your case, 0960 was ignored, but shall be in priority for emulator to select the right CAID (in our case, it is 0960).
-
Yes, got BT back 8) but now lost rest of Sky, so its the solution for 0963 but looks like 0960 is now being rejected or is something else wrong.
Ignore
X: { 09 63 }
X: { 09 61 }
Priority
V: { 04 06 00 }
V: { 04 28 00 }
X: { 06 02 }
X: { 06 52 }
X: { 09 60 }
X: { 4A E1 }
X: { 0D 96 }
X: { 18 33 }
I can get round it as I only need BT Sport for MotoGP but would like to have both.
-
kommando, why are you using ignore and priority lists?
Dreambox is a clever machine and emulator understands quite well which CAID is needed and which is not.
Try to delete both - ignore and priority lists - and see what happens.
Don't forget to reboot emulator after you delete both files.
-
I was just following the posts when I set the box up 18 months ago to access the service, the files came from this forum and as it worked I left them in place. I have renamed them by adding old and will try later when the latest recording has finished. This is the first issue in 18 months where the setup has been the problem.
Thanks for all your advice.
-
kommando, if you download recommended archive now (which is dated 16.10.2010), you will find that ignore.list is empty, and some entries in priority.list. Actually, for linux-receivers, we do not recommend to use the lists at all. Especially, for DM (all models). The lists are needed for the receivers with emulators not able to select the right caid. So, if your subscription is working without any ignore-priority lists, don't use them at all.
-
All working now.
Thank you again.
-
Was looking where I got the info on the priority and ignore list
https://www.cardsharing.cc/index.php?topic=24626.0
Topic: SkyUK parameters
It is recommended to add the following entries to ignore.list for those using MgCamd emulator:
/var/keys/ignore.list
X: { 09 60 }
X: { 09 61 }
/var/keys/prioroty.list
X: { 09 63 }
Which is exactly how mine were until today.
-
https://www.cardsharing.cc/index.php?topic=24626.0
You have noticed the post dated August 24, 2010 and it was (probably) actual to the date when the next post appeared.
Typically, all ignore-priority advices are for those who is using receivers that cannot correctly recognise and select the right CAID. For Dreambox users, no lists are required. As I told before, DM are clever receivers and need no additional plugins or settings.
As CAID 0960 for Irish channels was added not so long ago, we had to amend old information by just adding a couple of lines re:new caid. We did not specify the subject in a separate topic (as we usually do) in order not to attract attention of interested persons (i think, you know what i mean).
-
Is BT SPORT being fixed ? As I have no idea what to do to get bt sport working again, do I have to go through the procedure outlined in the previous posts or is this just a temporary fix? If it's temporary will bt sport come back on without me doing anything? Thanks
-
Is BT SPORT being fixed ? As I have no idea what to do to get bt sport working again, do I have to go through the procedure outlined in the previous posts or is this just a temporary fix? If it's temporary will bt sport come back on without me doing anything? Thanks
https://www.cardsharing.cc/index.php?topic=33627.msg115206#msg115206
-
it looks like bt sport is off again....black screen on 11597V 23000
-
BT Sports 1 HD, 2 HD and EurHD now on 11973/V/29500 frequency. fixed :)
-
Hello, can someone confirm the frequency for Bt sports channels please,
i have signal on 11973 v sr 29499 but still is not decoded.
i am using newcamd emulator .
Thanks
-
You missed FEC. Should be 11973/V/sr29500 FEC 3/4 DVB-S2
-
Hi, I have on my box (openbox s10 ) for transponder : 11973/v/29499 ???there is no FEC!
-
Hi, I have on my box (openbox s10 ) for transponder : 11973/v/29499 ???there is no FEC!
should be working with setting i mentioned above. i have v8s openbox. works like a charm
-
mine still not working, i don't know how to create that file cccamd.list in the same directory where is newcamd.list ???
and i don't have that freq 11973/V/sr29500 ???
-
works !!!!ypupiiii
-
Hi there folks
I am running mgcamd and have lost bt sport i have deleted both the ignore and priority lists but still no BT sport please can anyone help as i'm missing some good sport here :(
i am running openPLI on a dreambox 800se if this helps
Thanks guys,
-
Anybody can tell me how to get bt sport working again?? mine is not working for several days and I am getting p****d off !!
-
Hi there folks
I am running mgcamd and have lost bt sport i have deleted both the ignore and priority lists but still no BT sport please can anyone help as i'm missing some good sport here :(
i am running openPLI on a dreambox 800se if this helps
Thanks guys,
Hi,
OpenPLI is not a problem. Are you sure that your dish is tuned correctly?
https://www.cardsharing.cc/index.php?topic=24626.msg115315#msg115315
-
Anybody can tell me how to get bt sport working again?? mine is not working for several days and I am getting p****d off !!
No, until you complete your signature
https://www.cardsharing.cc/index.php?topic=24581.0
-
Make sure you're tuned to 11973/V/sr29500 FEC 3/4 DVB-S2
In "My Subscription" for mgcamd click "Show settings for Newcamd protocol", then copy the entry that begins: "CWS_KEEPALIVE = 300" - should be 3 lines, put these into /var/keys/newcamd.list . My mgcamd entry was out of date and missing the extra server port line.
-
Sorry to ask daft question but where do I find var/keys/newcamd.list ?
-
Sorry to ask daft question but where do I find var/keys/newcamd.list ?
Don't wait for answer, nobody here is going to teach you
https://www.cardsharing.cc/index.php?topic=24581.msg62731#msg62731
-
I've completed my signature so i have no idea what you are talking about ?
-
I've completed my signature so i have no idea what you are talking about ?
Me too
-
I have retuned my box and also looked to try and retune the transponder on the sat to the frequency 11973V but its not available on my dish. I have also rescanned the channel selection but no luck in that one.
understand that this may not be the right thread but had a look to try and log into my billing account but am not recognised any ideas @Suma?
Thanks in advance,
-
I have retuned my box and also looked to try and retune the transponder on the sat to the frequency 11973V but its not available on my dish. I have also rescanned the channel selection but no luck in that one.
understand that this may not be the right thread but had a look to try and log into my billing account but am not recognised any ideas @Suma?
Thanks in advance,
Sky has wide and narrow beams. Seems that you are in the area under the narrow beam. What to do? Look for any more professional specialists to tune the dish. If fail, forget about BT - it's not for your area.
-
thanks suma (Y)
-
On a non Linux machine like TM 5402 HD, in order to watch BT Sport you have to manually change the port from XXX42 to XXX43 on the Newcamd configuration for each server, (although I don't use the backup server because it generates stay alive requests and there is no way to configure it not to). I tried the CCCam configuration but with BT Sport SD and HD you just get a few seconds before it freezes. Incidentally, if you try CCCam and Newcamd emulators at different times in the same 24 hr period you get a warning about rule violation - even though you are not using both emulators at the same time. I hope I don't get banned!
-
Re my previous post I now find that by adding a duplicate of the server_45 connection but with the XXX43 port I can have both connections working at the same time. I couldn't get this to work before but uploading a modified CSINfo file where I copied and pasted the configuration and just changed to port seems to have done the trick.
-
bt sport down i have done a rescann but no joy
anyone else???
-
bt sport down i have done a rescann but no joy
anyone else???
There is no problem with BT Sport cnannels
-
Scanned all replies but can not find answer. Skybox 5f just entered new frequencies for bt sport astra 2g 11082 H 22000 5/6 and Astra 2e 11386 V 29500 3/4. Now on epg showing details but still not decoding. Connect OK as getting sky sports no problem. Any ideas?
-
Hi SUMA, I am running cccam with both lines active on a skybox f5 but unable to view my sports channels ie BT sports etc. can you please help. I have read all the forum but it seems to be geared towards other systems. ps I have updated my channel list and all that and re put my cccam lines in with no joy.
cheers
-
Hi,
There is only one idea I have - to address your questions to technical support of your receiver. Google for Skybox f5 forum and ask your questions there. We have a specialized sub-forum Re:Hardware (receivers), post your question there - maybe Skybox f5 users will advise you something
https://www.cardsharing.cc/index.php?board=50.0
-
Been on forum (kingtech) and their are no threads re loss of BT only traffic is problems re the new frequencies. Just a thought is the supplier of your signal a BT customer who gets BT sports as part of his package from BT. Would think the suppler needs to be a sky customer who is not a bt subscriber who pays for Bt as part of sky package. Also is this problem only on skyboxes5's?
-
skybox 5f - problem now sorted, checked the settings in my account and it was different to the settings set in the box, do not now why these settings have changed from those initially given.I was running on mgcamd input the new settings and got nothing even lost sky, deleted all settings. entered the new settings in cccam and hey presto got all bt programs back. Had to use tp list add to get hd on 11386 v 29500 3/4.