Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!

CardSharing Server ENG => Questions on cardsharing server => VIP Poland => Тема начата: zdunas82 от 22 Февраля 2021, 16:36:15

Название: Problems with Poland VIP package
Отправлено: zdunas82 от 22 Февраля 2021, 16:36:15
Hello,

Are there any problems with Poland Vip Package today? I have several clients with no TV. I have checked the connection logs and all decodings being rejected. Any reasons for that?
Thanks
Название: Re: Problems with Poland VIP package
Отправлено: wild_eagle от 22 Февраля 2021, 16:46:18
Same over here.
Название: Re: Problems with Poland VIP package
Отправлено: ap0f1s от 22 Февраля 2021, 17:21:29
also have a problem. All Requests are  rejected
Название: Re: Problems with Poland VIP package
Отправлено: makabo76 от 22 Февраля 2021, 17:26:17
Same here. All Requests are rejected
Название: Re: Problems with Poland VIP package
Отправлено: suma от 22 Февраля 2021, 17:27:28
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.
Название: Re: Problems with Poland VIP package
Отправлено: coca76 от 22 Февраля 2021, 18:28:30
Hi please tell me if I using cccam and dont work i must change for oscam??
BR Piotr
Название: Re: Problems with Poland VIP package
Отправлено: kokiczuk от 22 Февраля 2021, 18:42:47
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.

The correct ident is 1813:000068 not 1813:000000 - this is wrong and nothing is working black screen with rejected message.
Please correct this on your side because server is reporting 1813:000000

Цитировать
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 083E PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 4-1-2019
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 083E PROVID: 000068
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 08A2 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 0870 PROVID: 032A00
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1884 ECM_PID: 0906 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 found 5 ECM pids and 7 STREAM pids in CA PMT
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1813 PROVID 000068 ECMPID 083E ANY CHID PMTPID 03F2 VPID 00A9
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (33 ms) by z - CANAL+ SERIALE HD
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (2 ms) by z - CANAL+ SERIALE HD
Название: Re: Problems with Poland VIP package
Отправлено: coca76 от 22 Февраля 2021, 18:50:11
- Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.

I change for oscam emulator and config actual settings and still not working black screen still.
Название: Re: Problems with Poland VIP package
Отправлено: romaN237 от 22 Февраля 2021, 18:54:38
I have the same problem. OScam switched everything.
Название: Re: Problems with Poland VIP package
Отправлено: waldek от 22 Февраля 2021, 18:55:12
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.

Приставка Openbox AS2 HD
плагин XcamClient3 (OSCam Config)
протокол newcamd/mgcamd
Что надо изменить, чтобы принимать VIP Poland?
Название: Re: Problems with Poland VIP package
Отправлено: Maciek от 22 Февраля 2021, 19:01:38
Hello,
I'm using CCcam 2.3.2-de (arm) canal+ programs not working (Requests rejected).
Название: Re: Problems with Poland VIP package
Отправлено: kokiczuk от 22 Февраля 2021, 19:06:37
Nothing will work until they'll fix ident on server.
Right now they are sending 1813:000000 card to users but channels are working with 1813:000068

(https://i.postimg.cc/9Fn8yvsH/Przechwytywanie.png)

edit:
Fixed, ident 000068 added, everything is working right now.
Название: Re: Problems with Poland VIP package
Отправлено: wild_eagle от 22 Февраля 2021, 19:54:18
'- Emulator Cccam (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers working on new patch.'
Название: Re: Problems with Poland VIP package
Отправлено: suma от 23 Февраля 2021, 05:22:36
Update https://www.cardsharing.cc/index.php?topic=35831.new#new
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 23 Февраля 2021, 11:42:31
Hi, i did update configs from the billing, but work only few programs. I dont have in my config file parameter "ident". When i added it as user suma wrote, evertything stops... Can enyone help me??

Here is my config file:

[reader]
label       = "main_cardsharing.cc_XXX07"
protocol    = cccam
device      = server_175,XXX07
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068

[reader]
label       = "backup_cardsharing.cc_XXX07"
protocol    = cccam
device      = server_39,XXX07
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068
fallback    = 1
Название: Re: Problems with Poland VIP package
Отправлено: johann366 от 23 Февраля 2021, 12:15:39
Sprobuj w Ident wpisac
1813:00006A
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 23 Февраля 2021, 12:33:32
Niestety także nic nie działa...
Название: Re: Problems with Poland VIP package
Отправлено: johann366 от 23 Февраля 2021, 12:39:38
u mnie i u kolegi pomoglo....moze dekoder wylacz i zalacz ponownie
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 23 Февраля 2021, 13:23:05
Też nie to, jak usunę ident to działa ttv,wp i parę innych jak wpiszę cokolwiek w ident to nic nie działa...
Название: Re: Problems with Poland VIP package
Отправлено: asia15d от 23 Февраля 2021, 14:01:16
Spróbujcie jeszcze ustawień OsCam.
https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782
Na MgCamd'zie nic nie działało, OsCam ruszył.

DM8000HD, OpenPLI 8.0
Название: Re: Problems with Poland VIP package
Отправлено: suma от 23 Февраля 2021, 15:00:26
Here is my config file:

[reader]
label       = "main_cardsharing.cc_XXX07"
protocol    = cccam
device      = server_175,XXX07
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068


Maybe this is the reason - cccam protocol?
Try to use newcamd protocol with oscam emulator.

Must look like this:

[reader]
label       = "main_cardsharing.cc_port"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = servXX.com,port
user        = username
password    = password
group       = 1
audisabled  = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
inactivitytimeout = 300
ident     = 1813:000000,000068
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 23 Февраля 2021, 15:18:39
With newcamd protocol is the same sytuation as cccam works only a few programs. I've copyed config from the billing and there was ident = 1813:000000,000068.
Название: Re: Problems with Poland VIP package
Отправлено: suma от 23 Февраля 2021, 15:56:56
With newcamd protocol is the same sytuation as cccam works only a few programs. I've copyed config from the billing and there was ident = 1813:000000,000068.

You have rules violation. Check it in your connections history (billing).
1. You have 2 active emulators: Oscam and Cccam 2.3.0. Disable (or delete) Cccam emulator and don't use it.
2. Your receiver is sending EMM requests to the server. It is prohibited by the rules. You have to disable EMM requests sending in your emulator (Cccam). For cccam, it is required to specify parameter DISABLE EMM : yes in CCcam.cfg file (Cccam). For Oscam emulator, in [dvbapi] section, parameter au = 0 of your oscam.conf file (Read update- it is recommended to delete this parameter at all).
So, follow all we recommend for our users and everything will be OK.
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 23 Февраля 2021, 16:06:00
Ok the solution is to update Oscam. I've dowlnoaded and install

https://www.enigma2.net/softcam-oscam-11572/

and everything works :) Thanks for your time.

Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol
Название: Re: Problems with Poland VIP package
Отправлено: zelekmanc от 23 Февраля 2021, 17:15:27
Ok the solution is to update Oscam. I've dowlnoaded and install

https://www.enigma2.net/softcam-oscam-11572/

and everything works :) Thanks for your time.

Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol

Sorry, I'm giving up here  :'(
Downloaded and installed this oscam, edited all the files with text from my subscription and still nothing at all....

my oscam.server looks like this:

[reader]
label       = "main_cardsharing.cc_20207"
protocol    = cccam
device      = server_45,20207
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000

[reader]
label       = "backup_cardsharing.cc_20207"
protocol    = cccam
device      = server_291,20207
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
fallback    = 1

Even went the extra mile and installed OpenATV 6.4 from scratch on my zgemma.
Can someone help please!

Do I need to add any extra lines to this?

Thanks
Название: Re: Problems with Poland VIP package
Отправлено: suma от 23 Февраля 2021, 17:17:43
Try other image
Название: Re: Problems with Poland VIP package
Отправлено: kokiczuk от 23 Февраля 2021, 18:12:27
@zelekmanc

Keep it simple as possible.
It's pointless to enter ident or disabling cw check (it's global parameter in oscam config)

Цитировать
[reader]
label                         = main
protocol                      = cccam
device                        = host,port
user                          = login
password                      = password
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.3.0
ccckeepalive                  = 1
audisabled                    = 1

[reader]
label                         = backup
protocol                      = cccam
device                        = host,port
user                          = user
password                      = password
inactivitytimeout             = 30
fallback                      = 1
group                         = 1
cccversion                    = 2.3.0
ccckeepalive                  = 1
audisabled                    = 1
Название: Re: Problems with Poland VIP package
Отправлено: kohut17 от 23 Февраля 2021, 18:13:19
@suma
I have changed Mgcamd/OSCAM on Linux based boxes. I have two questions.

1. Is there solution for Amiko boxes (MIRA, MINI HD, etc.), I mean will they work with Mgcamd?
2. If they wont be working is there an option to change from NC+ to Cyfra+, and will be Cyfra+ working on Amiko boxes or will I be facing the same issue like with NC+? I did it in past and you changed the provider for me but I cant find way how to private message you. It would be for 4 accounts.
Название: Re: Problems with Poland VIP package
Отправлено: zelekmanc от 23 Февраля 2021, 23:19:18
Try other image

Not sure what else I can try...
Installed a completely new image - Openvix 5.4 for zgemma H9S
Installed the latest Enigma OSCAM 11686 and replaced files with info from my billing boxes:
 /etc/CCcam.cfg
/var/keys/cccamd.list
/etc/tuxbox/config/oscam.server
/etc/tuxbox/config/wicardd.conf

Activated oscam, restarted everything a thousand times, still no channels.
Have I missed anything? Had this subscription for many years now with no problems previously

Any help much appreciated!
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 23 Февраля 2021, 23:40:41
I am with same problems. I update files as required, save changes and restart box. I cannot find even one working channel. I read others and it is just same here.
Название: Re: Problems with Poland VIP package
Отправлено: dante107 от 24 Февраля 2021, 02:29:09
Any quick fix? Decoder zgemma h9 twin
Название: Re: Problems with Poland VIP package
Отправлено: suma от 24 Февраля 2021, 06:42:44
/etc/CCcam.cfg
/var/keys/cccamd.list
/etc/tuxbox/config/oscam.server
/etc/tuxbox/config/wicardd.conf

To my mind, you have a lot of unnecessary installed in your receiver which prevents from using one emulator with one protocol.
Reinstall image and start from the very beginning, installing only one emulator.
Please remember that 
Update

- Cccam emulator (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers are working on new patch.
Название: Re: Problems with Poland VIP package
Отправлено: suma от 24 Февраля 2021, 06:47:29
@suma
I have changed Mgcamd/OSCAM on Linux based boxes. I have two questions.

1. Is there solution for Amiko boxes (MIRA, MINI HD, etc.), I mean will they work with Mgcamd?


Address your question to Amiko support.

2. If they wont be working is there an option to change from NC+ to Cyfra+, and will be Cyfra+ working on Amiko boxes or will I be facing the same issue like with NC+?

NC+ = Cyfra+ (Cyfra+ is the old name of NC+ package)

you changed the provider for me

Sorry, we did not change provider for you or for anybody else. It's your personal choice whether to change provider or not.
Название: Re: Problems with Poland VIP package
Отправлено: monteedeluxe от 24 Февраля 2021, 10:31:22
Hi,
And what to do if I have Amiko NeoCombo SE receiver (it's not linux box) and after update Polish channels don't work? I'm using Cccamd emulator which is working for all packages, but now 2-3 days Polish TV is not working.
As a matter of interest I took a test from other cardsharing provider and all polish channels work normally, do you have any advice, how could I update settings?
Thank you and regards.
Название: Re: Problems with Poland VIP package
Отправлено: piwo681 от 24 Февраля 2021, 12:38:03
Ok the solution is to update Oscam. I've dowlnoaded and install

https://www.enigma2.net/softcam-oscam-11572/

and everything works :) Thanks for your time.

Suma I dont have Cccam emulator, only Oscam emulator by cccam protocol

Sorry, I'm giving up here  :'(
Downloaded and installed this oscam, edited all the files with text from my subscription and still nothing at all....

my oscam.server looks like this:

[reader]
label       = "main_cardsharing.cc_20207"
protocol    = cccam
device      = server_45,20207
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000

[reader]
label       = "backup_cardsharing.cc_20207"
protocol    = cccam
device      = server_291,20207
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
fallback    = 1

Even went the extra mile and installed OpenATV 6.4 from scratch on my zgemma.
Can someone help please!

Do I need to add any extra lines to this?

Thanks

Try to use newcamd config, for me it works.
Название: Re: Problems with Poland VIP package
Отправлено: suma от 24 Февраля 2021, 14:00:53
Hi,
And what to do if I have Amiko NeoCombo SE receiver (it's not linux box) and after update Polish channels don't work? I'm using Cccamd emulator which is working for all packages, but now 2-3 days Polish TV is not working.
As a matter of interest I took a test from other cardsharing provider and all polish channels work normally, do you have any advice, how could I update settings?
Thank you and regards.

Update

- Cccam emulator (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers are working on new patch.
- Other emulators:  1) check ignore.list and delete CAID 1813, if any.  2) Some non-linux receivers - you need to delete reader (server) and to setup it again. 3) Some boxes with Xcam emulator - you will need to delete all servers and file /var/etc/protect/xcam in the box via ftp and setup new connection.  Or install and use other emulator.
Название: Re: Problems with Poland VIP package
Отправлено: tomifranco от 24 Февраля 2021, 15:23:19
Hej,
wystarczy w oscam .server wpisać dane dla newcamd.

Czyli: Show settings for Newcamd protocol
I w oscam.server wklejamy dane z: Settings for emulator OSCAM for Newcamd protocol

Save
Restart oscam

Sprawdzone na 3 dekoderach zgemma.
Pozdro!
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 24 Февраля 2021, 16:44:51
Hello.
During searching in files I found oscam.server.old file. Will I need to delete this file or it have nothing to current situation?
I still cannot find problem here. Hope someone will sort it out and give some advice.
Regards
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 24 Февраля 2021, 17:02:40
Just a quick question. Is there any other recommended plugin to use? Oscam for Newcam is used at the moment.
Название: Re: Problems with Poland VIP package
Отправлено: suma от 24 Февраля 2021, 18:11:52
Just a quick question. Is there any other recommended plugin to use? Oscam for Newcam is used at the moment.

https://www.cardsharing.cc/index.php?topic=35831.msg131902#msg131902
Название: Re: Problems with Poland VIP package
Отправлено: dante107 от 24 Февраля 2021, 19:10:40
Kojarzysz może jak zmienić w zegmmie (pure2 6.3) z cccam na oscam? Próbuje znajomemu na odległość to ogarnąć, a nie mam dostępu do zegmmy  :(
Hej,
wystarczy w oscam .server wpisać dane dla newcamd.

Czyli: Show settings for Newcamd protocol
I w oscam.server wklejamy dane z: Settings for emulator OSCAM for Newcamd protocol

Save
Restart oscam

Sprawdzone na 3 dekoderach zgemma.
Pozdro!
Название: Re: Problems with Poland VIP package
Отправлено: dante107 от 24 Февраля 2021, 21:15:38
Ok ogarnięte nie było tematu :D
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 24 Февраля 2021, 22:56:00
Ok guys so I do double-check and I noticed that value for SNR is zero. Is that signal range? Could it be a reason?
Anyway I do as was described in solution but I want to ask... Shall I wipe out all data from oscam.server and then just paste data from billing or just wipe out readers for newcamd and paste billing one?
Название: Re: Problems with Poland VIP package
Отправлено: suma от 25 Февраля 2021, 05:27:01
Ok guys so I do double-check and I noticed that value for SNR is zero. Is that signal range? Could it be a reason?
Anyway I do as was described in solution but I want to ask... Shall I wipe out all data from oscam.server and then just paste data from billing or just wipe out readers for newcamd and paste billing one?

SNR - Signal Noice Rate - signal-to-noise ratio, the value specifying strength and quality of the signal received from satellite.
Channels with SNR 0% are either not available at the particular frequency, or your dish has turned away from the satellite by several degrees (something like that), or weather conditions (totally cloudy). Try to rescan satellite. If SNR remains 0%, then call for a specialist (or do it by yourself) to fine tune your dish
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 25 Февраля 2021, 10:49:14
It seems to be right. I have no signal from dish. Recent weather was bad. Possible that dish moved and lost signal. Thanks Suma for explaining.
Название: Re: Problems with Poland VIP package
Отправлено: Renifer1987 от 25 Февраля 2021, 16:56:06
All works after fixing signal from dish
 Thanks for advices and everything. Another happy customer.
Название: Re: Problems with Poland VIP package
Отправлено: macrin от 26 Февраля 2021, 18:14:06
hi,
Emulator Cccam (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers working on new patch.

when will there be a fix for cccam ???


Название: Re: Problems with Poland VIP package
Отправлено: Ipswich01 от 28 Февраля 2021, 11:27:50
Witam. Szukam pomocy dla Open box sx6. Obecnie miałem wtyczkę wicard. I przestała działać. Wie ktoś jak to teraz naprawić po tej zmianie ?
Название: Re: Problems with Poland VIP package
Отправлено: kros от 03 Июля 2021, 16:58:33
Does this channel Canal+ 1 HD work ? For several days, this channel has not been working for me . I use oscam and everything worked fine but this channel has not been working for a few days.
Название: Re: Problems with Poland VIP package
Отправлено: suma от 05 Июля 2021, 05:56:05
Does this channel Canal+ 1 HD work ? For several days, this channel has not been working for me . I use oscam and everything worked fine but this channel has not been working for a few days.

https://www.cardsharing.cc/index.php?topic=9566.0
P.S. There is no such user "kros" in the billing. Provide your actual information.
Название: Re: Problems with Poland VIP package
Отправлено: kros от 05 Июля 2021, 22:03:29
The channel is working already today   :D Thanks for the answer   ;)
Название: Re: Problems with Poland VIP package
Отправлено: jkmusic от 06 Июля 2021, 21:02:57
hi Suma, can you check the functionality of CANAL + SPORT 2 HD in the NC + package?  everything else is going perfectly fine, thanks.
jkmusic
Название: Re: Problems with Poland VIP package
Отправлено: suma от 07 Июля 2021, 10:26:18
Hi, any log-file?
Название: Re: Problems with Poland VIP package
Отправлено: jkmusic от 07 Июля 2021, 17:58:05
hi, it's running  ;)
jkmusic
Название: Re: Problems with Poland VIP package
Отправлено: Tomek2607 от 21 Августа 2021, 22:30:47
Ja mam dekoder Ariva 4k , niestety na Androidzie. Nie mam możliwości,żeby zmienić na Oscam. Jest jakaś możliwość,żeby to obejść? Mam najnowszego firmware'a i mcam z 25.01.2017