Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: PROTEk HD  (Прочитано 48233 раз)

orinoco

  • Новичок
  • *
  • Сообщений: 3
PROTEk HD
« : 27 Января 2011, 22:57:07 »
VIP All 3 day test,
Currently cannot open any channels, login is accepted by server ecm sent 47 bytes, Key received all looks ok, but screens are all black, tried lots of sats and packages, please advise?


Thanks
Protek 9750 HD ip FW:3.00.10 with Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #1 : 28 Января 2011, 04:53:34 »
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

orinoco

  • Новичок
  • *
  • Сообщений: 3
Re: PROTEk HD
« Ответ #2 : 28 Января 2011, 10:28:04 »
All information was provided apart from log file as Protek doesnt dump one out so I typed what was being shown in the emu screen

Protek 9750 HD ip
Newcamd
VIP All 3 day test
ecms are sent and replies come back with key received every 7-10 sconds, responses from the server are immediate
Protocol Newcamd

But the channels do not clear all remain black, despite a key being received, if I switch the other server back on that I currently have a sub with the channels are decoded, so box is working without issue

Login ok <CAID=0500>
0:7:32:00 ECM 47 bytes sent
0:7:32:01 Key received
0:7:32:15 ECM 47 bytes sent
0:7:32:16 key received
Protek 9750 HD ip FW:3.00.10 with Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #3 : 28 Января 2011, 10:35:30 »
Unfortunately, the model of your receiver is not well known. The only thing i can suggest that you have to ask other users on the forum with the same or similar receiver. You may create a separate thread Re: Protek 9750 HD in the HARDWARE section and exchange information on your receiver.

regards

P.S. If you set up your log-file, it must look like this:

[mg0] <- CW from newcamd serv1.xx:port (458ms)
[mg0] 458 msec -- Fri Jan 28 09:09:09 2011
system: Seca
caid: 0x0100
pid: 0x070d
prov: 00006A
cw0:0 E4 99 63 E0 4D 39 E2 68
cw1:0 D7 33 F6 00 1A 01 72 8D
from where it is clear which encryprion is used, what is CAID of the provider etc.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

capua

  • Пользователь
  • **
  • Сообщений: 27
Re: PROTEk HD
« Ответ #4 : 28 Января 2011, 11:38:23 »
 hi, apparently  the server is down for all PROTEK hd boxes and 9600i without id, ive been told they are working on it so we have to be patient.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #5 : 28 Января 2011, 11:44:27 »
You are invited to discuss Protek HD problems here
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

orinoco

  • Новичок
  • *
  • Сообщений: 3
Re: PROTEk HD
« Ответ #6 : 28 Января 2011, 22:21:00 »
Bizarre, put the server details in my Dreambox decoded channels without issue, put same details in Protek gets key but screen stays blank, other sub server that I currently I have working without issue from another provider :(
Protek 9750 HD ip FW:3.00.10 with Newcamd

mkdons

  • Новичок
  • *
  • Сообщений: 7
Re: PROTEk HD
« Ответ #7 : 30 Января 2011, 14:19:02 »
Guys.

I purchased as a test a subscription to this package, so that i could test out the sats at 5e and 9e.
But, although i can connect to the server OK, Login OK and caids are OK, nothing is clearing on 19e, 13e or 9e ?

Also does the subscription include Penthouse packs as there is no connection details in 'My subscriptions

Many Thanks
Protek 9700, Newcamd.
Openbox s10 CCcam, Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #8 : 30 Января 2011, 14:35:36 »
Guys.

I purchased as a test a subscription to this package, so that i could test out the sats at 5e and 9e.
But, although i can connect to the server OK, Login OK and caids are OK, nothing is clearing on 19e, 13e or 9e ?

Also does the subscription include Penthouse packs as there is no connection details in 'My subscriptions

Many Thanks

Read the whole thread, you have to change firmware of use other receiver
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

mkdons

  • Новичок
  • *
  • Сообщений: 7
Re: PROTEk HD
« Ответ #9 : 30 Января 2011, 15:27:17 »
Suma

I have already tested Hotbird package and it all worked fine, as well as currently having a skyUK subscription, which is working great too;D

Just the new test that fails ?  Dont have another box to test unfortunatley

Also add that cyfra+ is working fine from the test ?





 
Protek 9700, Newcamd.
Openbox s10 CCcam, Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #10 : 30 Января 2011, 15:51:58 »
The only thing I can tell you exactly- there is NO PROBLEM with the server. Look for the reason in your equipment. The same thing happenned to the Arriva HD receivers until they upgraded the new firmware. Suddenly, picture disappeared and they started send their reclamation and blame US.
NO, guys, check first your equipment. You see on the forum- there is NO claims from other users. All Protek owners sit and keep silence, because they understood that the problem is in their devices.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

mkdons

  • Новичок
  • *
  • Сообщений: 7
Re: PROTEk HD
« Ответ #11 : 30 Января 2011, 16:37:10 »
Suma

Well the reciever definitely does not like Germans.... ;D

All other packages are working on the channels that i can get except 19e.

I was not saying there was a problem with servers as i can connect fine, just seeing if other users had issues with clearing channels. As the Protek 9700/50 receivers are new to newcamd, I would expect some problems and this is the first time?

other question though is Penthouse part of the VIP Germany as there is no reference to it in the details of my subscription

Many thanks  ;D

Protek 9700, Newcamd.
Openbox s10 CCcam, Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #12 : 30 Января 2011, 17:32:30 »
Well the reciever definitely does not like Germans.... ;D

Therefore, we like German DreamBox (it is the best!)  :D

All other packages are working on the channels that i can get except 19e.
We need your log-file to study your problem.


I would expect some problems and this is the first time?

Probably  >:(

other question though is Penthouse part of the VIP Germany as there is no reference to it in the details of my subscription

I will ask the Moderator, in the general list it is available, in My subscription - NO.


regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #13 : 30 Января 2011, 18:06:35 »
After Penthouse changed encryption (to Viaccess), the channels are no more available in Vip Germany, Holland, and Eurosib respectively. However, the channels are available in all other VIPs (all, lite, Russia, and Vip Porno until they have the same IDENT as SCT have).
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

mkdons

  • Новичок
  • *
  • Сообщений: 7
Re: PROTEk HD
« Ответ #14 : 30 Января 2011, 18:15:46 »
Unfortunatley no log files on the protek or if there is i cant access them?

I am connected to another server for SkyDE (1833) and that works well, so dont know what the problem is.

Not worried as it is a test and that is what tests are for.
5e working fine now

Again many thanks  :D
Protek 9700, Newcamd.
Openbox s10 CCcam, Newcamd

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #15 : 30 Января 2011, 18:27:31 »
If you are using services of other server, you may ask them how to...log-file. Maybe they are more experienced in Protek receivers
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

fine4all

  • Новичок
  • *
  • Сообщений: 3
Re: PROTEk HD
« Ответ #16 : 31 Января 2011, 01:32:47 »
mate am having Protek 9750 and it was working correct with this very server without problem , only that the package i wanted is not working with Newcamd thats was the reason, i still have my line now but am not using it , because the package is not opening with the receiver, all in hotbard work, Asatra 19 work , astra 28 great, but Thor and Viasat is not working with protek, check ur system very well , it works
Protek 9700HD ip FW: ++++++
Protek 9750HD ip FW: ++++++
120 stab Motorized-USAL

ahmet50

  • Пользователь
  • **
  • Сообщений: 15
  • Mad Turk
Re: PROTEk HD
« Ответ #17 : 31 Января 2011, 15:02:45 »
Hi all,

Got my all in vip subscription - I get nothing in thor 1*w,  intelsat 0.8*w, sirius 4.8*e or Digiturk 7*e althought I get 3 of the 4 Penthouse channels on 9*e on hotbird I get sky calcio 2,3 and 4 no other sky channels, I get private spice nothing on 16*e and not a lot on 19*e astra so really I am not very happy! o.k I understand that my equipment is not recognized by cardsharing cc but surely as there are more and more of us guyz that have the protek 9700 and 9750 HD ip boxes should have a bit more support from your end as well as just saying 'check your equipment' as our equipment works perfectly with the proetk servers! It also works with your servers as I get green light on all ports and ok connections and <caid> ok and keys sent and recived ok so why do I have Black Screen???

Thank you.
Protek 9700 HD ip
TecchnoMate 6900+HD COMBO

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: PROTEk HD
« Ответ #18 : 31 Января 2011, 17:02:05 »
Hi all,

Got my all in vip subscription - I get nothing in thor 1*w,  intelsat 0.8*w, sirius 4.8*e or Digiturk 7*e althought I get 3 of the 4 Penthouse channels on 9*e on hotbird I get sky calcio 2,3 and 4 no other sky channels, I get private spice nothing on 16*e and not a lot on 19*e astra so really I am not very happy! o.k I understand that my equipment is not recognized by cardsharing cc but surely as there are more and more of us guyz that have the protek 9700 and 9750 HD ip boxes should have a bit more support from your end as well as just saying 'check your equipment' as our equipment works perfectly with the proetk servers! It also works with your servers as I get green light on all ports and ok connections and <caid> ok and keys sent and recived ok so why do I have Black Screen???

Thank you.

Hello, the only question to you - were all channels working for you when you took a 3 day test?
Why do you think that we have to provide a bit more support for this receiver? We are cardsharing server and we do not support any receivers. We provide you with general settings required for cardsharing based on the most wide spread receivers - Dreamboxes, Openboxes which were used 3-4-5 years ago, not the receivers which were just manufactured. We do not know and we are not obliged to know every receiver in the world. I will repeat- we are not technical support of this model nor of any other almost unknown model. Do you suggest us to buy this receiver and study it? Thank you! We have better receivers and we know how to set them up. That is why we ask everybody with a new model to ask technical support of the model purchased. There is a lot of forums Re: Dreambox, Openbox, Ferguson etc. The users who cannot receive sufficient information here, usually address to the other forums. But this is not our blame that we do not know Protek, we do not know Ariva 200 HD etc unknown receivers. We provide only general sharing information suitable for the most of receivers. So, I will ask you again and again- for more technical information, please address support forums of your receiver! We do not know which firmware is the best or better than the one availabe now. Look for the internet, other forums, other users' feedback on this model before you start using this model. Finally, read the forum Re: the most used models for you to know - which are the best and which are not.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

ahmet50

  • Пользователь
  • **
  • Сообщений: 15
  • Mad Turk
Re: PROTEk HD
« Ответ #19 : 31 Января 2011, 17:32:46 »
Hi suma,

I am asking for help to get my subscription to work properly as I said I get green lights on all the ports I enter into my protek and it says 'log in ok' but I cannot see anything on my screen!!! Do I need to do anyhting more? As I said the only channel that I can see is Private Spice and the others I mentioned before also it seems to freeze every 30 / 45 seconds for a 1 / 2 seconds.

I just want help to view the other packages on the other satellites. Also one more question on the packages in your price list which channels do we get? or is it ALL the channels in that package?

Thank you again suma
Protek 9700 HD ip
TecchnoMate 6900+HD COMBO