Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Problems with Poland VIP package  (Прочитано 14878 раз)

zdunas82

  • Пользователь
  • **
  • Сообщений: 13
Problems with Poland VIP package
« : 22 Февраля 2021, 16:36:15 »
Hello,

Are there any problems with Poland Vip Package today? I have several clients with no TV. I have checked the connection logs and all decodings being rejected. Any reasons for that?
Thanks
Zgemma H.9S OpenATV 6.3 Cccam 2.3.0 80cm dish  Hotbird 13.0E NC+ Polsat.

wild_eagle

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #1 : 22 Февраля 2021, 16:46:18 »
Same over here.

ap0f1s

  • Пользователь
  • **
  • Сообщений: 12
Re: Problems with Poland VIP package
« Ответ #2 : 22 Февраля 2021, 17:21:29 »
also have a problem. All Requests are  rejected

makabo76

  • Новичок
  • *
  • Сообщений: 2
Re: Problems with Poland VIP package
« Ответ #3 : 22 Февраля 2021, 17:26:17 »
Same here. All Requests are rejected

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Poland VIP package
« Ответ #4 : 22 Февраля 2021, 17:27:28 »
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

coca76

  • Новичок
  • *
  • Сообщений: 4
Re: Problems with Poland VIP package
« Ответ #5 : 22 Февраля 2021, 18:28:30 »
Hi please tell me if I using cccam and dont work i must change for oscam??
BR Piotr
ZGEMMA H7S 4K ULTRA HD ENIGMA2 HDD 1TB
OE-Alliance 4.4,OpenATV 6.4.20210218 (2021-02-16),  4.10.12 / 20191123

kokiczuk

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #6 : 22 Февраля 2021, 18:42:47 »
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.

The correct ident is 1813:000068 not 1813:000000 - this is wrong and nothing is working black screen with rejected message.
Please correct this on your side because server is reporting 1813:000000

Цитировать
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 083E PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 4-1-2019
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 083E PROVID: 000068
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 08A2 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 0870 PROVID: 032A00
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1884 ECM_PID: 0906 PROVID: 000000
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 found 5 ECM pids and 7 STREAM pids in CA PMT
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2021/02/22 16:41:34 019EBF60 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1813 PROVID 000068 ECMPID 083E ANY CHID PMTPID 03F2 VPID 00A9
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (33 ms) by z - CANAL+ SERIALE HD
2021/02/22 16:41:34 019EBF60 c (ecm) dvbapiau (1813@000068/0000/3782/64:88DD5DEB8E2261CFA0E87C6E5BF3811B): rejected (2 ms) by z - CANAL+ SERIALE HD

coca76

  • Новичок
  • *
  • Сообщений: 4
Re: Problems with Poland VIP package
« Ответ #7 : 22 Февраля 2021, 18:50:11 »
- Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.

I change for oscam emulator and config actual settings and still not working black screen still.
ZGEMMA H7S 4K ULTRA HD ENIGMA2 HDD 1TB
OE-Alliance 4.4,OpenATV 6.4.20210218 (2021-02-16),  4.10.12 / 20191123

romaN237

  • Пользователь
  • **
  • Сообщений: 41
Re: Problems with Poland VIP package
« Ответ #8 : 22 Февраля 2021, 18:54:38 »
I have the same problem. OScam switched everything.

waldek

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #9 : 22 Февраля 2021, 18:55:12 »
22.02.2021
Provider Platforma Canal+ (NC+) was switched from the CAID 0100 - Mediaguard to the CAID 1813 - Nagravision.
New NC+ channels which was not work before, will start work. Most customers don't need to change anything in his boxes, the package should work automatically.
If package do stop work on your box, please read carefully info bellow :
Users who use emulator OSCAM, need to update confings from the billing. You need delete all lines from the oscam.server, copy to this file actual settings from the billing, save it and reboot receiver.  Or change filter for NC+ reader in oscam.server file and replace line ident = 0100:000068 to the ident = 1813:000000
Users who use emulator MGCAMD version 1.38 or lower, need update Mgcamd to the version 1.46, or use another emulator (you can dowload it on our site).  Older versions do not support CAID 1813.
Other emulators:  1) check ignore list and delete CAID 1813 if present.  2) Some non linux receivers need delete a reader (server), and setup it again. 3) some boxes with xcam emulator need to delete all servers and file /var/etc/protect/xcam in the box via ftp, and after setup new connection.  Or install and use another emulator.

Приставка Openbox AS2 HD
плагин XcamClient3 (OSCam Config)
протокол newcamd/mgcamd
Что надо изменить, чтобы принимать VIP Poland?

Maciek

  • Новичок
  • *
  • Сообщений: 1
Re: Problems with Poland VIP package
« Ответ #10 : 22 Февраля 2021, 19:01:38 »
Hello,
I'm using CCcam 2.3.2-de (arm) canal+ programs not working (Requests rejected).

kokiczuk

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #11 : 22 Февраля 2021, 19:06:37 »
Nothing will work until they'll fix ident on server.
Right now they are sending 1813:000000 card to users but channels are working with 1813:000068



edit:
Fixed, ident 000068 added, everything is working right now.

wild_eagle

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #12 : 22 Февраля 2021, 19:54:18 »
'- Emulator Cccam (all versions) do not support CAID 1813 and can not send ECM requests to the server. Our programmers working on new patch.'

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Poland VIP package
« Ответ #13 : 23 Февраля 2021, 05:22:36 »
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

piwo681

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Poland VIP package
« Ответ #14 : 23 Февраля 2021, 11:42:31 »
Hi, i did update configs from the billing, but work only few programs. I dont have in my config file parameter "ident". When i added it as user suma wrote, evertything stops... Can enyone help me??

Here is my config file:

[reader]
label       = "main_cardsharing.cc_XXX07"
protocol    = cccam
device      = server_175,XXX07
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068

[reader]
label       = "backup_cardsharing.cc_XXX07"
protocol    = cccam
device      = server_39,XXX07
user        = user
password    = password
group       = 1
cccversion = 2.3.0
audisabled  = 1
ccckeepalive = 1
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 1813:000000,000068
fallback    = 1

johann366

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #15 : 23 Февраля 2021, 12:15:39 »
Sprobuj w Ident wpisac
1813:00006A

piwo681

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Poland VIP package
« Ответ #16 : 23 Февраля 2021, 12:33:32 »
Niestety także nic nie działa...

johann366

  • Новичок
  • *
  • Сообщений: 3
Re: Problems with Poland VIP package
« Ответ #17 : 23 Февраля 2021, 12:39:38 »
u mnie i u kolegi pomoglo....moze dekoder wylacz i zalacz ponownie

piwo681

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Poland VIP package
« Ответ #18 : 23 Февраля 2021, 13:23:05 »
Też nie to, jak usunę ident to działa ttv,wp i parę innych jak wpiszę cokolwiek w ident to nic nie działa...

asia15d

  • Новичок
  • *
  • Сообщений: 1
Re: Problems with Poland VIP package
« Ответ #19 : 23 Февраля 2021, 14:01:16 »
Spróbujcie jeszcze ustawień OsCam.
https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782
Na MgCamd'zie nic nie działało, OsCam ruszył.

DM8000HD, OpenPLI 8.0