Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Banned  (Прочитано 5012 раз)

o0kennyw0o

  • Пользователь
  • **
  • Сообщений: 20
Banned
« : 03 Ноября 2014, 15:24:28 »
Hi Suma.  I find myself banned and have emailed the admin to request if he/she can unblock.  From the below and cut down version of my email to the mod, can you see any settings that are wrong? I been through them twice and have been using your supplied mg_conf file and cannot find any issues which be causing the problem.  I've asked the mod if he can see anything but can you?

Date: 2014-10-30. Reason: increased number of requests for decoding (cascading, connection of more than 1 unit, use of pending decoding, etc.)

M: { 00 }
C: { 01 }
A: { 00 }
U: { 02 } 0x12c0
T: { 00 }
G: { 01 }
N: { 07 } 360 3600
K: { 07 }
Q: { 60 }
P: { 00 }
O: { 02 } root password
S: { 03 } 80
L: { 02 } MyIPAddress 28007 /tmp/mgcamd.log
E: { 00 }
H: { 00 }
R: { 00 }
D: { 31 }
B: { 06 }
F: { 00 }

cascading - an increased number of queries for decoding (limit - 1 query per 10 seconds, 360 queries per 1 hour, 8640 queries per 24 hours)  For cascading, account will be terminated without possibility of restoration and without any compensation. Cascading is being equal to a theft. Please be noted that for 1 account, it is allowed to watch and record only 1 channel at a time. The following are the reasons for blocking account:

connection of 2 and more receivers per 1 account I have one receiver with dual login (VU+ Solo2)

- use of PIP option picture in picture. I don't use PIP but I have dual login.

- delayed decoding I don't know what this is but I am sure I do not use it.

- access is re-shared for more than 1 receiver (resharing). I am definitely not sharing, I only have the one receiver.

- understated timeout to listen to DW from the server (< 7 seconds) in emulator settings. My K parameter is { 07 } in mg_cfg file as you can see from above.
VU+ Solo2, OpenViX, Dual S2-DVB, Mgcamd 1.38.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Banned
« Ответ #1 : 03 Ноября 2014, 16:45:09 »
VU+Solo2 specification:
1) New driver: 20121220
- Support tuner A Loop through to B
(Configuration = Tuner A : loop through to B, Tuner B : Normal Setup )
Do you know what is this?
You can watch and record simultaneously the channels from one transponder.
To do the same for different channels, you need to have 2 cables from 2 different dishes (each cable per each tuner). (I found this from the Russian forum of VU+Solo2 discussion). If so- you were banned correctly.
Find English support forums and study this issue.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

o0kennyw0o

  • Пользователь
  • **
  • Сообщений: 20
Re: Banned
« Ответ #2 : 03 Ноября 2014, 17:12:58 »
Thank you Suma.

I'm not that 100% sure what this is but the answer I guess is partly in your reply.  I have one LNB feed in to tuner A and the other (from the same dish) in to tuner B. I'm not knowingly looping through. Maybe it is an OpenViX setting I can change.

What is interesting is your reply "...To do the same for different channels, you need to have 2 cables from 2 different dishes (each cable per each tuner)..."

I thought this is why I needed dual login?

I thought I understood this enough to use the service  :o
VU+ Solo2, OpenViX, Dual S2-DVB, Mgcamd 1.38.

o0kennyw0o

  • Пользователь
  • **
  • Сообщений: 20
Re: Banned
« Ответ #3 : 03 Ноября 2014, 18:48:55 »
Is it best just to remove the LNB feed to Tuner B?
VU+ Solo2, OpenViX, Dual S2-DVB, Mgcamd 1.38.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Banned
« Ответ #4 : 03 Ноября 2014, 19:07:59 »
https://www.cardsharing.cc/index.php?board=53.0
This is the thread you have to start with. I think, owners of this model of receiver will advice you what to do. All I could do was just to find Russian forum at Gis-club and start reading. You need to look for the English forums and find as much info as possible. I don't know VU+ receivers, their specifics, how to, we just provide you with general CS-related information. Sorry
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

o0kennyw0o

  • Пользователь
  • **
  • Сообщений: 20
Re: Banned
« Ответ #5 : 03 Ноября 2014, 19:26:51 »
Thanks for the reply again Suma!
VU+ Solo2, OpenViX, Dual S2-DVB, Mgcamd 1.38.