Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: HD Plus (Deutschland) 19E not work :(  (Прочитано 18296 раз)

wolleman

  • Пользователь
  • **
  • Сообщений: 24
  • dreambox 820
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #20 : 30 Сентября 2013, 23:21:53 »
aber nicht vergessen in mg_cfg   F: { 00 } sonst geht HD+ nicht.
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #21 : 01 Октября 2013, 01:44:45 »
Tried to configure everything with mgcamd - installed mgcamd 1.35a, downloaded the ignore, mg_cfg, priority and replace files, copied cws config to newcamd.list, set permissions to 755. Results are very mixed.
HD+ works, however, only some channels and some without sound. As for Sky DE channels work, some without sound. As for Skylink nothing works.
Went back to oscam- here sky and skylink work including sound, but HD+ does not. Also, channel switching seems slower with mgcamd compared to oscam.
Is there anything in mgcamd configuration I can change to fix the issues mentioned above?
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #22 : 01 Октября 2013, 05:18:18 »
Hi,
I think, you need to go here http://www.cardsharing.cc/index.php?board=53.0 and read what is special in VU+ receivers. To my mind, you need to change image.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #23 : 01 Октября 2013, 05:22:44 »
hallo ich habe HD+ seit ca. 1 1/2 jahren hier. es funkt sehr gut mit mgcamd 1.35a(dm800). einfach alle einstellungen vom server nutzen. wennes bei dir nicht funktioniert, dann sind das einstellungsgeschichte. das bild bleibt maximal ein mal am tag stehen ca. 1 sec. damit kann ich sehr gut leben! mfg

Hi, reinstall image and try again. For dm800 HD, we recommend Domica image.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #24 : 01 Октября 2013, 10:38:30 »
I suspect the mgcamd I downloaded may be faulty. Suma, can you please give me a link, where I can download mgcamd 1.35a, which you know is 100% good. I saw there is version 1.38 available - you do not recommend to use this version?
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #25 : 01 Октября 2013, 10:58:08 »
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #26 : 01 Октября 2013, 11:12:03 »
Suma, thank you for your answer, but I currently have VTI image and would like to keep it. The link you gave me is to download the PLI image and then mgcamd from the receiver. Can you please give me a link where I can download mgcamd for VTI (Enigma 2), which you know is working? Thanks.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #27 : 01 Октября 2013, 11:51:29 »
Unfortunately, I am using Domica image with an option to download mgcamd within the image and I cannot confirm 100% that any emu downloaded using web link will 100% work with your image.
http://www.dreamboxtool.com/MGcamd/MgCamd-1-35a-Complete-for-e2.html
http://www.luxsat.eu/Dreambox/index_emus.htm

Try these, and if you fail, re-install image (OpenPLI 3.0 is the most recommended for your receiver)


regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #28 : 01 Октября 2013, 18:31:36 »
Tried open pli - even worse than vti. Sky and hd plus did not work at all. Reinstalled vti with oscam, gave up on hd plus.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #29 : 01 Октября 2013, 18:54:36 »
The most probable that some small detail is missed in the settings (config files). Have you checked B parameter in mg_cfg file? What is it in your settings?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #30 : 01 Октября 2013, 19:11:11 »
Yes, I did set it to 06.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #31 : 01 Октября 2013, 19:50:53 »
Read the thread re: VU+ receivers again and again. I hope, you will find answer to your issue there. Issues are similar. It can't be so that only you have problems with your receiver.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #32 : 01 Октября 2013, 20:09:54 »
I know, but I have wasted way too much time with this now - not really worth the one dollar. The other services are working, which is important. Thank you for your help.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #33 : 01 Октября 2013, 20:17:43 »
So, we have to tell you "bye-bye, we'll miss you"? Why, then, you made up your mind to leave that service? because of the one dollar? Or, do you think, you just connected and everything must work immediately and without any troubles?
OK, your business.
Tomorrow, all our communication messages will be deleted not to litter the forum.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #34 : 01 Октября 2013, 21:36:39 »
No, you misunderstood - I am not leaving - I just don't want to spend more time trying to resolve the HD plus problem (that is the one dollar). Currently I am using also Skylink and Sky De, which are working fine and I intend to continue using these services. Regards.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #35 : 01 Октября 2013, 21:54:04 »
For vu+, I recommend OpenPLi-3.0 image + 1.35a mgcamd
http://openpli.org/
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #36 : 02 Октября 2013, 02:27:40 »
->xturex - that is exactly what suma recommended - I tried both PLI 3 and 4 with mgcamd - nothing works. I have read tons of comments on your forum, tried differend mgcamd modules from the recommended links, adjusted all parameters and settings as people recommended - nothing works. Going back to my original config - VTI image + oscam - here at least SKY DE and Skylink work, HD Plus does not.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #37 : 02 Октября 2013, 05:21:03 »
One more advice - if you use ignore and priority lists from our server, remove them and restart emulator. What will happen then?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #38 : 02 Октября 2013, 08:50:04 »
Sent me to PM your oscam config
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

marcelmmx

  • Пользователь
  • **
  • Сообщений: 15
Re: HD Plus (Deutschland) 19E not work :(
« Ответ #39 : 02 Октября 2013, 11:44:11 »
Suma - Now using VTI 6.0.1. with mgcamd - I deleted the files - I think it is the same - however, sound seems to work fine on all channels.
From the HD Plus package RTL 2 HD, SIXX HD and Sport1 HD are not working - the other programs work.
Also many of the Sky DE programs stopped working (e.g. Cartoon Network, Boomerang, Disney Junior and XD, Fox HD, Sky Cinema HD...)
With oscam Sky and Skylink work HD plus does not.
VU+ Solo2, image VTI 6.0.1, OSCAM 1.20-unstable_svn build r8118, Astra 19+23, packages Sky DE, Skylink, HD Plus