Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: VIP CZECH - some programs doesnt work  (Прочитано 5352 раз)

marlo

  • Пользователь
  • **
  • Сообщений: 24
VIP CZECH - some programs doesnt work
« : 23 Декабря 2019, 12:57:03 »
Today I bought VIP Czech package for a test 3 day. I was your customer long time ago.

Some chanels like STV1,2 CT-HD,PRIMA ..doesnt work.

But channel like TA3 and new channel TROJKA is working good.

I use settings OSCAM from admin after purchase subscription.

2019/12/23 10:55:03 779609A0 c anonymous (0624&000000/0000/1329/59:1AA7A117F6AB09A8B0369FF08202C1DC): not found (1 ms) by "main_cardsharing.cc_20028"
2019/12/23 10:55:03 779609A0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

Iam using OSCAM: 1.20-unstable_svn Build: r9986 Compiler: mipsel-oe-linux-ssl  . I used this OSCAM long time for VIP All and works everything good.

VU Zero+ :: VTi 14.0.6 ::OSCam: 1.20_svn Build: r11572 Compiler: mipsel-oe-linux

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #1 : 23 Декабря 2019, 16:53:39 »
Hi,
Which image is used? What is your receiver?
Complete your signature, please
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #2 : 23 Декабря 2019, 17:09:05 »
Of 4 ports available from Vip Czech, you are connecting to only 1 port...
Maybe, you will check the billing settings and compare them with those in your receiver?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Aresko

  • Новичок
  • *
  • Сообщений: 4
Re: VIP CZECH - some programs doesnt work
« Ответ #3 : 05 Августа 2020, 10:12:05 »
Hi, after changing to newcamd the protocol only decodes programs in the IRDETO encoding system, CW does not. Through the cccam server it's ok, but sometimes it cuts programs in all positions. That's why I wanted to switch to newcamd. Receiver VU + Uno4K SE, image VTi 14.0.6. Thanks for help.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #4 : 05 Августа 2020, 15:12:04 »
Hi, after changing to newcamd the protocol only decodes programs in the IRDETO encoding system, CW does not. Through the cccam server it's ok, but sometimes it cuts programs in all positions. That's why I wanted to switch to newcamd. Receiver VU + Uno4K SE, image VTi 14.0.6. Thanks for help.

Hi, did you follow the instructions of Oscam setting up?
https://www.cardsharing.cc/index.php?topic=35019.msg125782#msg125782
If you enter the billing and see your connections history, you will find out that 2 emulators are used at the same time: Cccam and Oscam. It's rules violation. You have to use only 1 emulator (Oscam), delete or disable Cccam and all Cccam configs, set up Oscam, restart receiver and be happy.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Aresko

  • Новичок
  • *
  • Сообщений: 4
Re: VIP CZECH - some programs doesnt work
« Ответ #5 : 16 Августа 2020, 12:15:09 »
Hello,
i have double checked and there is no way there is an Active connection from CCCam, if there is, please, write me an IP Adress of that device which is connecting by CCCam.

However, everything works i can watch Cryptoworks coded channel, only on Skylink it doesn't work. So this is why i think there must be error on your side. If there would be something blocked because of rules violation, i think i couldn't watch anything.

Thanks for you help.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #6 : 16 Августа 2020, 13:48:37 »
Hello,
i have double checked and there is no way there is an Active connection from CCCam, if there is, please, write me an IP Adress of that device which is connecting by CCCam.

However, everything works i can watch Cryptoworks coded channel, only on Skylink it doesn't work. So this is why i think there must be error on your side. If there would be something blocked because of rules violation, i think i couldn't watch anything.

Thanks for you help.

Hello,
You double checked an active connection from Cccam, but you forgot to check your connections history (statistics) in the billing.
If you did, you will find the rules violation. In particular - connection to the server from 2 emulators- Cccam and Oscam. Receiver must have only 1 emulator and connect to the server using one of the protocols- Cccam or Newcamd. Disable one of your emulators, set it up properly and you will see the result. Check 2,3,5 times before blaming on our server (side).
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Aresko

  • Новичок
  • *
  • Сообщений: 4
Re: VIP CZECH - some programs doesnt work
« Ответ #7 : 16 Августа 2020, 15:21:10 »
As you have pointed out - it is a history, it was used, but a long time ago. I curently don't have a CCCam installed.
That's why i have blamed your side, how can i be using 2 emulators, when i have installed and configured only one.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #8 : 16 Августа 2020, 17:26:12 »
As you have pointed out - it is a history, it was used, but a long time ago. I curently don't have a CCCam installed.
That's why i have blamed your side, how can i be using 2 emulators, when i have installed and configured only one.

It's a question to you, not to me or server. Server is tracking all connections and my response was based on the server statistics - you are violating the rules by using 2 emulators. You have to better know your receiver and its settings, server is just pointing out your errors.
Study your receiver and find out where are umulators, how enable or disable them, etc. If your receiver is using 2 emulators at a time, it means that you set them up somehow...you must know better. So, if you set up Cccam, so you must know how to enable it or disable. The same with Oscam.
Server advice- use only one emulator.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Aresko

  • Новичок
  • *
  • Сообщений: 4
Re: VIP CZECH - some programs doesnt work
« Ответ #9 : 17 Августа 2020, 12:26:03 »
If your receiver is using 2 emulators at a time, it means that you set them up somehow...you must know better. So, if you set up Cccam, so you must know how to enable it or disable. The same with Oscam.
Server advice- use only one emulator.

Receiver is not using 2 emulators at a time. There is no CCCam installed - if you don't believe me, i can send you a photo where is only one emulator installed. Nothing else, clean install of the image + one emulator. That's it

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #10 : 17 Августа 2020, 13:41:37 »
When you just start using our service (switch on your receiver), wait for 5-10 minutes, then enter www.cardsharingserver.com --> Connections history and look what is written there. If you see that server is pointing out at rules violation and describes the possible reasons - amend your settings. That's all. I do not need any photos of your receiver and emulators. Sorry, but I trust the server more than you. Sorry again.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

atec

  • Новичок
  • *
  • Сообщений: 8
Re: VIP CZECH - some programs doesnt work
« Ответ #11 : 29 Октября 2020, 19:07:36 »
Hello,

after the protocol change from cccam to newcamd I encountered the same issue – using OSCam Skylink channels with both Irdeto (CAID: 0624) and Cryptoworks (CAID: 0D96) encoding systems are not beeing decoded.
Skylink Irdeto-only channels (CAID: 0624) and channels from another packages in VIP Czech are beeing decoded properly.

1. I strictly followed all rules and recomendations I found in this forum and this thread as well.
2. I deleted all configurations files and settings for OScam and did all setting from scratch according to your instructions.
3. There was warning about rules violation immediately after protocol change for a few hours (2 emulators at a time) which disappeared the next day after protocol change.
4. I am using Dual Login.

It's nothing easier than to switch back to cccam protocol, however I hope there is a chance for solution of described issue.
Thanks!
Xtrend ET 10000 G-Edition, Open ATV 6.4, USALS, VIP Czech, OSCam stable 1.20

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #12 : 30 Октября 2020, 13:37:14 »
after the protocol change from cccam to newcamd I encountered the same issue

Hi,
"The same issue" means that you've experienced the issue before using cccam protocol?
Have you tried the image other than the one you have now?
Before buying full subscription, we recommend to take a 3-day test (1 USD cost) to check, if everything is working correct. I think, you did not get it to test your equipment. It's a typical story when a user buys full subscription without preliminary testing of his receiver and later on, we hear something like "I hope there is a chance for solution of described issue"...
One of the solutions is to change image, not protocol. Sometimes, changing emulator also helps.

Regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

atec

  • Новичок
  • *
  • Сообщений: 8
Re: VIP CZECH - some programs doesnt work
« Ответ #13 : 30 Октября 2020, 17:30:48 »
Sorry, suma,

you are wrong.
I've been using your services for many years now, and - yes I've taken 3-day test before my first full subscription at that time, and - yes, I've been using newcamd protocol some years before without problems.

I hate to say it, but you always blame the others for not doing their homework, well maybe it's time to do yours.
I am ok with your rigorous rules and I always try to solve problems by myself. And in those very rare cases when I am asking for help I would expect at least a minimum respect and politeness. And the will to help.

Regards
Xtrend ET 10000 G-Edition, Open ATV 6.4, USALS, VIP Czech, OSCam stable 1.20

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VIP CZECH - some programs doesnt work
« Ответ #14 : 31 Октября 2020, 06:50:17 »
Sorry, suma, you are wrong.

I am wrong where? Am I wrong in asking you standard questions that I usually ask everybody? I am trying to understand where is your problem.

1. First, let us analyze your signature, from where I get information on your equipment.
It is stated that you are using "Xtrend ET 10000 G-Edition, Open ATV 6.4, USALS, VIP Czech, OSCam stable 1.20".
OpenATV is very strange image and its behaviour with varios receivers is unpredictable. So, based on various posts, I suggested you to change image.
2. Moderator checked your connections to the server and the following was found:

the channel list for user atec (total 20 channels):
--------------------------------------------------------
 caid@ident:sid        | founds | time of request         | channel name
--------------------------------------------------------
 0624@000000:1329 | 17     | 2020-10-30 15:39:40 | RTVS 1 (skylink)
 0624@000000:1328 | 39     | 2020-10-30 15:46:30 | TA 3 (skylink)
 0624@000000:3723 | 4      | 2020-10-30 15:46:19 | Joj Family (skylink)
 0624@000000:1F41 | 14     | 2020-10-30 15:49:24 | CT 1 Cechy (skylink)
 0624@000000:371F | 21     | 2020-10-30 15:53:48 | Wau TV (skylink)
 0D96@000004:3399 | 3      | 2020-10-30 16:33:08 | Plus (skylink)
 0624@000000:132F | 7      | 2020-10-30 16:36:50 | Unknown channel (0624@000000)
 0D96@000004:0307 | 11     | 2020-10-30 16:35:34 | HBO Czechia (skylink)
 0D96@000004:372D | 8      | 2020-10-30 16:39:13 | TV Mark'iza +1 (skylink)
 0D96@000004:1329 | 2      | 2020-10-30 16:40:41 | RTVS 1 (skylink)
 0D96@000004:0308 | 3      | 2020-10-30 16:41:04 | HBO 2 Central Europe (skylink)
 0D96@000004:0303 | 6      | 2020-10-30 16:41:48 | National Geographic Hungary & Czechia (skylink)
 0624@000000:030F | 251    | 2020-10-30 17:23:39 | Love Nature (skylink)
 0B00@000000:07D1 | 36     | 2020-10-30 17:38:24 | Jednotka (antik)
 0B00@000000:0489 | 3      | 2020-10-30 17:38:51 | Unknown channel (Mtv,Rikor,CD)
 0B00@000000:048C | 4      | 2020-10-30 17:39:21 | Unknown channel (Mtv,Rikor,CD)
 0D97@000004:77F2 | 21     | 2020-10-30 17:42:57 | Discovery Science (upc)
 0B00@000000:1270 | 68     | 2020-10-30 18:06:40 | Discovery Science (antik)
 0B00@000000:006C | 223    | 2020-10-30 19:39:41 | Discovery (antik)
 0B00@000000:0A9D | 2      | 2020-10-30 18:15:30 | FilmBox Extra (antik)
From this short report I understand that you are watching TV without any problem. Both 0624 and 0D96 are decoded by your receiver with no rules violations.
Moreover, I highlighted OSCam stable 1.20 (from your signature and from your previous post).
It is really OSCam stable 1.20 that you are using to decode channels? Really?
Moderator statistics says that you are using emulators other than OsCam:

list of used emulators:
  |- 1119, CCcam 2.3.0              | 4
  |- 91c0, Mgcamd 1.45c (mips)  | 23

How shall I trust the information you provide in your posts? What do you think?

I hate to say it, but you always blame the others for not doing their homework, well maybe it's time to do yours.

My "homework" as you say is TO CHECK if the information you provide is true and COMPARE with the information I have from the server.
As you see, information is different. Can you explain this?

I am ok with your rigorous rules and I always try to solve problems by myself. And in those very rare cases when I am asking for help


Our "rigorous" rules were written for you, not for me - to observe them and to strictly follow, otherwise you could hardly stay with us since 2012...

I would expect at least a minimum respect and politeness. And the will to help.

You will feel respect and politeness when you provide true and correct information. At the moment, I cannot see it.
As for my will to help, it depends on the information you provide on the forum.
Unfortunately, I see nothing but
after the protocol change from cccam to newcamd I encountered the same issue – using OSCam Skylink channels with both Irdeto (CAID: 0624) and Cryptoworks (CAID: 0D96) encoding systems are not beeing decoded.

To my mind, you are misunderstanding two different things- protocol and emulator. Feel the difference, please.

Regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic