I need help,blocked because something went wrong during the installation. E2 Sys

[DVBFREAK]

Iam using your service almost for years and I absolutly like it. But now I really have a serious problem and Iam still shocked scared and I really have no clue what to do.

When I installed everything on my DVB-S2 PC it took me about 5 hours to read every topic in this board and about 1 hour for the configuration. Everything worked fine.

My account is still okay but today I tried to configurate a box of a neighbour and something must have gone terrible wrong.  Account hanspetermeyer

Today I tried to install your lines on a Edision Pingulux Mini (Enigma2- OpenATV4.2)  to make it possible that the kids of my neighbour are able to watch Disney for Christmas. This time absolutly nothing worked well. MGcamd didnt work at all even if I took every config from this board. Then I switched to oscam. After a while I got a picture but if I switched the channel then it took about 10 seconds. I tried almost everything but it didnt get any better. I allways tried to remember and follow the rules but something has gone wrong.

When I logged on with the username hanspetermeyer I saw a lot of warnings and errors.

I never wanted to do something wrong. I just wanted to get this receiver running.

I was never connected with 2 different Emulators. I stopped one and started the other.
I switched a lot of time during testing to see whats happening but above 939? Iam very shocked.

Then it says the main and the backup server were decoding different TV channels. How is that possible ? In the configs for oscam they are labeled as "FALLBACK" so it should only be used as a fallback?

Right now my mind is blowing.  I am so messed up Iam completly destroyed. 


I can understand that you are angry about me because I must have been configurated something wrong but please understand that I didnt break the rules because I wanted to. I really want my neighbours kids to watch their Disney channels. I always have been a good customer and also I tried to help other in this forum by posting Configfiles and so on.

Please help me and tell me how to solve this problem. I dont want to be blocked and I also dont want my neighbour to be blocked. I just want that we both are able to use your service without messing up your server.



Right now I am not able to search in this forum anymore and Iam even scared of even touching this edision receiver. But If somebody owns a SH4 Box which is running Enigma2 on it then please send me your config files. I used some from this forum and it didnt work so Iam so very scared to do something wrong again, it absolutly would help me to get these files. I never asked for something but this time I will. Iam so destroyed right now. I thought it would take me 1 hour to config everything, after hours Iam ... I have no idea what Iam. Please help.


If I get some files or if I try some configuration, can I post everything to make sure that everything is okay? I really would appreciate it and I dont want more trouble.

[DVBFREAK]

I removed the user data from the settings and uploaded them here. Maybe somebody can tell me whats wrong with these settings.

Edision pingulux mini sh4 Enigma2 Openatv 4.2



If you give me a chance then I will install an other image without any EMU pannel or whatever, install oscam and the settings by hand and use your testserver to make sure that everything works.

If everything works then I will post my settings and a howto here to make sure that nobody else will run into this trouble.

[suma]

Hi, try Google
https://www.google.com/search?q=Edision+Pingulux+Mini+and+mgcamd+1.35&ie=utf-8&oe=utf-8&aq=t&gws_rd=ssl
As one of solutions, delete reserve server, leave only main one.

[samyeshak]

Dear All,

Please appreciate your support , i have receiver Truman TM900 HD , i have insert all data on my receiver but still not working.

every time show this Msg "Connection Closed"

Many thanks for you support.

[suma]

Hi,

but still not working.

did it work before? Have you taken a free test before buying subscription? Did it work during the test?

[samyeshak]

Hi ,

yes my receiver was work before using account from inside my country. but not working with test .

[suma]

If it was not working with the test, why then you are trying to adjust it using full subscription? You may take as many free tests as you like, even every day. First of all, adjust receiver, be sure that it is connected to the server and then use full subscription.
When adjusting your receiver, please pay attention to the connection history (it is in the billing). If you see there is no connection - it means that something's wrong with internet. If you see errors - learn, why they appear and try to eliminate them.
Moreover, name of receiver is not sufficient to render you assistance. We need more information - what is the firmware used, emulator (mgcamd or cccam or any other) and its version, log-file is also required.
So, you may freeze (suspend) your subscription at the moment and start with a free test. Take the test as many times as you like until your receiver works OK and you are sure that it can be used with our server further.
If everything is OK, then you may unsuspend your subscription and go on watching TV.

[samyeshak]

Hi,

Many thanks for your reply,
Please this sever working with my receiver "Truman TM900 HD" normal.

[suma]

No problem now?

[DVBFREAK]

I tested a lot and Iam not finished right now but even though I did not finish it I have to leave you a message...

I downloaded an official Image from the openATV board. On this board EMUlators are not allowed anymore.

Maybe my image was broken but I assume that it fails for a special reason.

By testing I found out that:

• MGCAMD does not work anymore. Even if you use 1.35 it doesnt decode. In the telnet window you see the cw but the picture stays black
• the only Emu which is partital working is OSCAM. It often fails to decode and it you switch the channel it might take up to 30 seconds to decode
• Oscam is started at least 4 times at the same time
• if you have installed 4 Cams then it could happen that the emu switches without any reason. It also can happen that 3 emulators are running at the same time
• the cam is sending data to the cardserver without any reason

I installed 3 different versions of the OpenATV Image and always I got the same behavier. It seems that the CAMD was modified and there are some additional scripts.


When I installed a HDMU Image on my box everything was working right from the beginning.


Maybe there are some errors in the latest build but in my opinion it was planed to be this way.



After all Iam happy that Iam not so stupid. Maybe stupid but not that stupid.

[suma]

After all Iam happy that Iam not so stupid. Maybe stupid but not that stupid.

Me too 
It is good that you may experiment with your receiver and various images and came to some conclusion.

[DVBFREAK]

I have to thank you a lot. I was almost going crazy but you answered me immediately and helped me. Thats why I like this service. Everybody is nice, the prices are low and everything works perfekt.

I wish you and everybody in this board a merry christmas and a happy new year 

 

[suma]

Thanks! Merry Christmas and Happy New Year to you too! 

[samyeshak]

Hi suma,

im still have the same problem, please i hope you support me to dissolve this problem.

[suma]

Hi suma,

im still have the same problem, please i hope you support me to dissolve this problem.

Hi, how can i help you? I am not technical support of your receiver. You have to find support forum and find everything which may help you.