Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Need Help  (Прочитано 4969 раз)

Gigablue13

  • Гость
Need Help
« : 29 Апреля 2019, 23:33:00 »
Hello  ???

I have a question I have today VIP Germany bought but SKY does not work the German channels are working very well.
Use a Receiver Gigablue HD UE with mgcam 1.35a
why does SKY not work what am I doing wrong .. ??? :o
Somebody can help me...??

thy for answer..

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need Help
« Ответ #1 : 30 Апреля 2019, 07:06:08 »
What are you doing wrong? You don't read the forum.
The issue was and is discussed every day.
Read the forum and you will find the anser to your question.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Gigablue13

  • Гость
Re: ok
« Ответ #2 : 30 Апреля 2019, 17:03:34 »

Hello, thanks for the answer
I tried 4 hours it just does not work ..
Search another cardsharing provider
Thank you..
best regards

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: ok
« Ответ #3 : 30 Апреля 2019, 17:32:16 »

Hello, thanks for the answer
I tried 4 hours it just does not work ..
Search another cardsharing provider
Thank you..
best regards

We will miss you.... :'(
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Gigablue13

  • Гость
Re: Need Help
« Ответ #4 : 30 Апреля 2019, 17:44:48 »

why does my SKY Germany not work?


I have inserted everything in the mgcamd list but I miss the mg_cfg list I can not find the data for the mg_cfg list only Germany HD TV works  :-\ :-\


suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need Help
« Ответ #5 : 30 Апреля 2019, 17:53:01 »
Is it very difficult for you to read the forum?
It will be better to spend 4 hours in reading the forum before useless tries

https://www.cardsharing.cc/index.php?topic=35400.80
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need Help
« Ответ #6 : 30 Апреля 2019, 21:01:27 »
what is an mgcamd list ?
the MGcamd emulators  I know have an mg_cfg file with configuration settings - who else except you should say where the file is gone ? and it's only mg_cfg, no list or anything else, mg_cfg is the whole filename

and in addition thereis a newcamd.list if you use Newcamd-protocol, or a cccamd.list to use Cccam-protocol but there is no "mgcamd-protocol" so no mgcamd.list-file
Keep in mind, that you have to set correct parameters in mg_cfg regarding the protocol you want to use (Newcamd or Mgcamd - parameter G:)
perhaps look: https://www.cardsharing.cc/index.php?topic=34772.msg124198#msg124198

PS: I amnot sure if CCcam filename is cccam.list, or cccamd.list (using both will not harm your box)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Gigablue13

  • Гость
Re: Need Help
« Ответ #7 : 01 Мая 2019, 13:04:47 »
Hello Jogi :

I then completely flashed my receiver and then installed mgcamd_1 38r1 on my reveiver
Have then copied the 2 files newcamd.list and mg_cfg file in the folder usr / keys
Then the CWS data is copied to the newcamd.list and attributes are set to 755.
But it works only German HD channels Sky does not work
I always had another cardsharing provider because I got the data for the newcamd.list and the data for the mg_cfg list.
the file for mg_cfg starts like this
old mg_cfg file :
M: {01}
C: {01}
A: {01}
U: {05}
T: {00}
G: {01}
N: {07} 5 30
K: {05}
Q: {300}
P: {02}
O: {02} root dreambox
S: {02} 8080
L: {01} 192.168.178.20 514
E: {15}
H: {07}
R: {04}
D: {00}
B: {06}
Q: {00}
When I copy the CWS data to mg_cfg file my receiver does not work anymore.

I know you have to copy the CWS file on mewcamd.list but I'm missing data for the mg_cfg
Have now tried 10 hours nothing works only my German TV HD the others do not work at all

Gigablue13

  • Гость
Re: Need Help
« Ответ #8 : 01 Мая 2019, 15:11:49 »
hello again :

Hello Jogi

I tried everything Sky just does not work
If I use mgcamd 1.45b in the receiver with the CWS file then nothing works anymore
I give it up now 11 hours have tried everything  :P :P :P

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need Help
« Ответ #9 : 01 Мая 2019, 20:58:10 »
you do not need to test it with Mgcamd 1.3x
1.45b might work, I only know about 1.45c version of Mgcamd designed for the technical changes made by Sky
but the Mgcamd file need to be build for your receiver, otherwise it will not work of course

if there is no Mgcamd145c available for your STB, you might try Oscam - what requires a Oscam-version for your receiver

BTW: switching cs-server will not help you at all :)
this is a technical change of Sky Germany in the ECM transmitting. There is nothing any cs--server can do to get old emulators working again.
Sorry, but the rules are made by Sky of course and to get it working with cs you need to follow this rules.
Or you switch to a server delivering the channels as video stream (so no satellite reception required, only a compatible streaming box or PC)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Gigablue13

  • Гость
Re: Need Help
« Ответ #10 : 02 Мая 2019, 19:21:11 »
Hello Jogi.. :D

Thank you for your answer...
I have the mgcamd 1.45b and the 1.45c copied to the folder var / keys to test but because the channels remain black.
It works only with mgcamd 1.35 and 1.38r1for HD + but if Sky has changed the encryption I have to wait until a mgcamd comes running ..

I delete the mgcamd 1.38r1 and then use the mgcamd 1.45c but everything stays black.

And yes the cfg file is created automatically ...

Did that yesterday tested :)))

Do not know why everything stays black in the mgcamd 1.45c yesterday 4 hours tried :))

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need Help
« Ответ #11 : 02 Мая 2019, 20:02:29 »
I would say Mgcamd (new version) is not running
what happens if you start Mgcamd via Telnet ?
or perhaps simpler (if you do not know): can you kill a mgcamd prozess as you are assuming the emulator is running ?
you need to connect by Telnet to the box and simply type
killall mgcamd
do you get an errormessage or is the "input sign" only moving a line bbelow ? (at least the 2nd time you should get an error)
killall mgcamd assume that the file is named exactly mgcamd - if the filename is different you have to use the exact wrting (including exact writing of small and capital letters)
I assume you will always get a reply like "process not found" because the mgcamd version you try to use is not working on your receiver at all
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need Help
« Ответ #12 : 03 Мая 2019, 07:28:56 »
Use a Receiver Gigablue HD UE with mgcam 1.35a

Looking through the Gigablue support page https://gigablue.de/image-bootloader/, I should say that there is no such model of receiver you specified - Gigablue HD UE
Either your receiver is toooooo old and is not supported any more, OR there is no such a model at all OR your name of receiver is incorrect.
In order to save your and our time and nerves, I suggest that you have to address all your questions to support on a specialized Gigablue forum
https://www.gigablue-support.org/gigablueforum/forum/
There, you will find the answers to all your questions, I hope. When asking your questions on the forum, please specify our suggestions to use Oscam with newcamd, or our version of Mgcamd

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need Help
« Ответ #13 : 03 Мая 2019, 13:12:49 »
looks like this receiver:
https://www.satboerse24.de/Gigablue-HD-Ultra-UE-Sat-Linux
running on a BCM7362 750 Mhz Dual Core Mips processor (I do not know, if the available Mips version of emulators will run, or if dual core processors need special builds beside Mips compatibility)

You might try Oscam as suggested.
Perhaps try it with the Oscam-package from https://www.cardsharing.cc/index.php?topic=35400.msg128429#msg128429
By my knowledge you will need the oscam version for mipsoe20 or the version for solo4k
To setup Oscam you will find informations here in the forum and also Google has many links for questions about how to setup oscam
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Gigablue13

  • Гость
Re: Need Help
« Ответ #14 : 03 Мая 2019, 21:13:13 »
Hello :)
THX for your many Answer..

I have installed Oscam emu on my STB Gigablue Ultra HD, an i have found empty Oscam files,an have copy the files in var/key an my question is where cant i finding the oscam file ???
I can not find any data in my account I need oscam files who can my help ??? I need oscam.server and oscam.conf where cant find  t´his files..??

An i Have a CCam converter to oscam running this with the file cws ???

thx

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need Help
« Ответ #15 : 04 Мая 2019, 05:55:30 »
https://www.cardsharing.cc/index.php?topic=35019.0

Download Oscam via receiver FEED or Bluepanel (I have no idea how it is realized in Gigablue receivers, but must be similar to Dreambox or VU+). As a rule, emulator comes with all files and all settings which you only need to modify according to your billing data
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Gigablue13

  • Гость
Re: Need Help
« Ответ #16 : 04 Мая 2019, 23:59:29 »
THX Suma  :)

I do not know why,but when I click in my account of my subscription have this message : You have no subscription!

I can not find any data in my subscription my subscription is empty why ?????? :(

thx for help

Gigablue13

  • Гость
Re: Need Help
« Ответ #17 : 05 Мая 2019, 00:02:51 »
here screenshot for my account... :(

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need Help
« Ответ #18 : 05 Мая 2019, 06:29:56 »
Let's start from the very beginning of our communication here on the forum:

On April 30, 2019, you wrote:

I have today VIP Germany bought

After some tries, you wrote:

I tried 4 hours it just does not work ..
Search another cardsharing provider

Was it a trick from your side or what?
It's a usual practice, when user fails to set up his equipment (receiver, emulator, settings), he threatens that he will find another CS-provider, give up and leave. Well, it's the problem of the user, not our problem. We are not going to keep any user here by no means. This is your right to leave or not to leave.
Before clicking "AGREE" when signing up to our forum, server, billing, you had to read our rules.
I suspect that you never read them, as well as you never paid attention to the dates of your subscription when paying for it.
By the way, there is "Transactions history" in your personal cabinet and you may check - when did you pay, which amout (if any) and what were the dates of your subscription (deadline). Our billing is automatic and it is recording any step of the user - payment, cancellation, dates, etc., if any.

Now I wonder if you have ever been subscribed to any of our packages... If you got a test subscription - it lasts 1 day (24 hours). If you bought 3 days test (1 USD), it lasts 3 days (72 hours).
If you bought 1 month subscription - it must be active today as well as yesterday, 1 week later, etc. till the end of May.
I cannot check your personal cabinet, this is your private information. Only you can check what, when, etc.

If you have any questions re: your subscription (payment, transactions, deadline, etc.), you may contact Moderator by e-mail providing full information on your membership on the forum and payment details https://www.cardsharing.cc/index.php?topic=11573.0.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic