Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => SkyLink HD 23E => Тема начата: loriene от 09 Ноября 2020, 12:56:29
-
Hi,
I just come over news that skylink is going to remove supprot for caid 0d96 /cryptoworks/ in first quater of 2021.
just wondering if all stay ok /they state that irdeto and viaaces will remain.
thx,
sorry for maybe dumb question ;)
-
Irdeto 0624 will remain, so no problem for now.
-
Irdeto 0624 will remain, so no problem for now.
Right you are!
-
Hm now work ok
Irdeto (Layer 2b) going... is problem?
-
We are working on it
-
I wish you a good day,
Skylink switches HBO 2, HBO 3 and Cinemax to HD. From 11.1.2020, these programs will be coded with Irdeto with increased security and the Viaccess Orca system. The new programs LALA, Extreme Sports Channel, Spektrum Home and the program CBS Reality already have this coding and therefore they only have a black screen!
Should we prepare for this situation with any adjustment or issue instructions on how to proceed if necessary?
I know you're already working on it and I'm keeping my fingers crossed that everything will work out ...
Your loyal customer.
-
We don't expect any problem in the future.
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
Hi,
You have rules violation. You can check it by yourself by entering the billing (www.cardsharingserver.com) --> Connections history
You are using 2 emulators (as I understood - one of them is built-in emulator - vdr-sc, and the other one is CCcam 2.3.0). You must use only 1 emulator - either vdr-sc OR CCcam 2.3.0, but never both of them together.
If several emulators are installed in your receiver, only one emulator must have the status "Running" and type of run "Auto"!
Currently, you have 2 emulators running, and it's violation of rules and you can be banned by the server.
Also, add one more server to your settings. There must be 2 lines with main and reserve servers.
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
Hi,
You have rules violation. You can check it by yourself by entering the billing (www.cardsharingserver.com) --> Connections history
You are using 2 emulators (as I understood - one of them is built-in emulator - vdr-sc, and the other one is CCcam 2.3.0). You must use only 1 emulator - either vdr-sc OR CCcam 2.3.0, but never both of them together.
If several emulators are installed in your receiver, only one emulator must have the status "Running" and type of run "Auto"!
Currently, you have 2 emulators running, and it's violation of rules and you can be banned by the server.
Also, add one more server to your settings. There must be 2 lines with main and reserve servers.
Good day,
thanks for the warning. I already know I didn't do the switch well. After deleting the data on the receiver, switching off and entering new data, everything is OK. I wrote about checking my connection at "moderator@cardsharing.cc" and so far it's within the rules. No policy violations or IP address blocking.
Christmas is coming and that's why I want to make sure it's okay.
Thank you for the exemplary cooperation and I wish you a pleasant holiday.
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
Hi, do I understand it right that you are able to watch Hbo 2 (and similar programs) in hd now?
-
Hi, do I understand it right that you are able to watch Hbo 2 (and similar programs) in hd now?
Correct. Those channels are working since day 2 (when admin wrote that he is working on it).
-
ano, jedou ..... mohu potvrdit :)
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
Hi,
You have rules violation. You can check it by yourself by entering the billing (www.cardsharingserver.com) --> Connections history
You are using 2 emulators (as I understood - one of them is built-in emulator - vdr-sc, and the other one is CCcam 2.3.0). You must use only 1 emulator - either vdr-sc OR CCcam 2.3.0, but never both of them together.
If several emulators are installed in your receiver, only one emulator must have the status "Running" and type of run "Auto"!
Currently, you have 2 emulators running, and it's violation of rules and you can be banned by the server.
Also, add one more server to your settings. There must be 2 lines with main and reserve servers.
Good day,
thanks for the warning. I already know I didn't do the switch well. After deleting the data on the receiver, switching off and entering new data, everything is OK. I wrote about checking my connection at "moderator@cardsharing.cc" and so far it's within the rules. No policy violations or IP address blocking.
Christmas is coming and that's why I want to make sure it's okay.
Thank you for the exemplary cooperation and I wish you a pleasant holiday.
Jak se vám podařilo rozchodit HBO2 HD, Cinemax HD, ...atd na Cryptoboxu? Já Cryptobox 752HG a na těchto kanálech mám černočernou tmu.
-
Have a nice day,
after switching to Cccam emulator everything is OK. I have an AB CryptoBox 650HD receiver, where I do not have the ability to edit the CCcam.cfg file ...
Please check if I have any problems with frequent sending of EMM requests to the server! I don't want to have any inconvenience now over the Christmas holidays.
Your loyal customer.
Hi,
You have rules violation. You can check it by yourself by entering the billing (www.cardsharingserver.com) --> Connections history
You are using 2 emulators (as I understood - one of them is built-in emulator - vdr-sc, and the other one is CCcam 2.3.0). You must use only 1 emulator - either vdr-sc OR CCcam 2.3.0, but never both of them together.
If several emulators are installed in your receiver, only one emulator must have the status "Running" and type of run "Auto"!
Currently, you have 2 emulators running, and it's violation of rules and you can be banned by the server.
Also, add one more server to your settings. There must be 2 lines with main and reserve servers.
Good day,
thanks for the warning. I already know I didn't do the switch well. After deleting the data on the receiver, switching off and entering new data, everything is OK. I wrote about checking my connection at "moderator@cardsharing.cc" and so far it's within the rules. No policy violations or IP address blocking.
Christmas is coming and that's why I want to make sure it's okay.
Thank you for the exemplary cooperation and I wish you a pleasant holiday.
Jak se vám podařilo rozchodit HBO2 HD, Cinemax HD, ...atd na Cryptoboxu? Já Cryptobox 752HG a na těchto kanálech mám černočernou tmu.
Prečítaj si príspevky vyššie, aby sa ti nestalo , to isté. U mňa stačilo prepnúť na protokol CCcam. Nastavenie by si mal mať v tvojom profile v predplatnom.
-
Thanks, but i do not know what I am doing wrong. I have servers and newcamd525 ports set up in my ABCryprtobox client as per instuctions in "my settings" stated in my account. I am using server type newcs/MGcamd in ABCryptobox. I also deleted data on the receiver and entering several firmwares, but still have a black screen on HBO 2/3 HD, CINEMAX 1/2HD. I have also switchted to cccam protocol in the account, but w/o success. Remaining channels are ok. Any IDEA how to solve it?
-
Ok, i have changed from newcamd to cccam and it seems it works. I hope i do not have the same problem as ronofix above. I have old ariva ferguson 202e.
Please, could anyone check it for me?
-
Thanks, but i do not know what I am doing wrong. I have servers and newcamd525 ports set up in my ABCryprtobox client as per instuctions in "my settings" stated in my account. I am using server type newcs/MGcamd in ABCryptobox. I also deleted data on the receiver and entering several firmwares, but still have a black screen on HBO 2/3 HD, CINEMAX 1/2HD. I have also switchted to cccam protocol in the account, but w/o success. Remaining channels are ok. Any IDEA how to solve it?
Just change the server settings from newcamd to cccam as "Skier" did!
I made a mistake that I did not disable the newcamd at first and did not restart the receiver immediately .... Both protocols were reloaded and there was a problem. We learn through mistakes ...
I wish you happy holidays.
-
Ok, i have changed from newcamd to cccam and it seems it works. I hope i do not have the same problem as ronofix above. I have old ariva ferguson 202e.
Please, could anyone check it for me?
There is no user "Lyžař" in the billing. How can we check if you did not provide your billing login?
-
Ok, i have changed from newcamd to cccam and it seems it works. I hope i do not have the same problem as ronofix above. I have old ariva ferguson 202e.
Please, could anyone check it for me?
There is no user "Lyžař" in the billing. How can we check if you did not provide your billing login?
Sorry for that, my login is Lyzar.
-
Thanks, but i do not know what I am doing wrong. I have servers and newcamd525 ports set up in my ABCryprtobox client as per instuctions in "my settings" stated in my account. I am using server type newcs/MGcamd in ABCryptobox. I also deleted data on the receiver and entering several firmwares, but still have a black screen on HBO 2/3 HD, CINEMAX 1/2HD. I have also switchted to cccam protocol in the account, but w/o success. Remaining channels are ok. Any IDEA how to solve it?
Just change the server settings from newcamd to cccam as "Skier" did!
I made a mistake that I did not disable the newcamd at first and did not restart the receiver immediately .... Both protocols were reloaded and there was a problem. We learn through mistakes ...
I wish you happy holidays.
Switching server settings from newcam to cccam does not really changed anything in my case. I initially supposed in past that I see black screen on tv just due to AB Cryptobox as it is not open Linux system and can not be edited by any config file. But I recorded you also have Cryptobox, so that is why I tried to do again all the steps like switching to cccam, update new firmware, restart, delete all data in system, upload new one. But still w/o result that I can see new coded channels on my tv at all.
-
Thanks, but i do not know what I am doing wrong. I have servers and newcamd525 ports set up in my ABCryprtobox client as per instuctions in "my settings" stated in my account. I am using server type newcs/MGcamd in ABCryptobox. I also deleted data on the receiver and entering several firmwares, but still have a black screen on HBO 2/3 HD, CINEMAX 1/2HD. I have also switchted to cccam protocol in the account, but w/o success. Remaining channels are ok. Any IDEA how to solve it?
Just change the server settings from newcamd to cccam as "Skier" did!
I made a mistake that I did not disable the newcamd at first and did not restart the receiver immediately .... Both protocols were reloaded and there was a problem. We learn through mistakes ...
I wish you happy holidays.
Switching server settings from newcam to cccam does not really changed anything in my case. I initially supposed in past that I see black screen on tv just due to AB Cryptobox as it is not open Linux system and can not be edited by any config file. But I recorded you also have Cryptobox, so that is why I tried to do again all the steps like switching to cccam, update new firmware, restart, delete all data in system, upload new one. But still w/o result that I can see new coded channels on my tv at all.
Solved.
-
Thanks, but i do not know what I am doing wrong. I have servers and newcamd525 ports set up in my ABCryprtobox client as per instuctions in "my settings" stated in my account. I am using server type newcs/MGcamd in ABCryptobox. I also deleted data on the receiver and entering several firmwares, but still have a black screen on HBO 2/3 HD, CINEMAX 1/2HD. I have also switchted to cccam protocol in the account, but w/o success. Remaining channels are ok. Any IDEA how to solve it?
Just change the server settings from newcamd to cccam as "Skier" did!
I made a mistake that I did not disable the newcamd at first and did not restart the receiver immediately .... Both protocols were reloaded and there was a problem. We learn through mistakes ...
I wish you happy holidays.
Switching server settings from newcam to cccam does not really changed anything in my case. I initially supposed in past that I see black screen on tv just due to AB Cryptobox as it is not open Linux system and can not be edited by any config file. But I recorded you also have Cryptobox, so that is why I tried to do again all the steps like switching to cccam, update new firmware, restart, delete all data in system, upload new one. But still w/o result that I can see new coded channels on my tv at all.
Solved.
Congratulations and what the main problem was. This for followers ....
-
Ok, i have changed from newcamd to cccam and it seems it works. I hope i do not have the same problem as ronofix above. I have old ariva ferguson 202e.
Please, could anyone check it for me?
There is no user "Lyžař" in the billing. How can we check if you did not provide your billing login?
Sorry for that, my login is Lyzar.
According to your statistics, no rules violation detected. Everything is OK. You can check it by yourself by entering www.cardsharingserver.com, select "Connections history" from menu and you will see it.
-
Hi, just to be sure everything is really OK, I have checked it again this afternoon. Connections history showed me some troubles.
This is the cause why I changed quickly from cccam back to newcamd client.
Could anybody help me? Direct communication (e-mail, FB etc) may be better. In attachment you can find the details of my issue.
My receiver is Ariva 202e, Skylink package, I would like to set the receiver up in the way to watch also new HD channels like HBO 2 HD, HBO 3 HD etc.
Thanks for any kind of help.....
-
First and foremost: according to your connections history, it follows that you are using 2 emulators at once. It is prohibited by the server rules. From the connections history you have to learn this for future - never use two emulators at once, use only one - either Cccam OR -vdr-sc built-in emulator. To my mind, you are confusing with emulator and protocol - RTFM!
Emulator (built-in -vdr-sc, oscam, cccam, mgcamd, etc.) is a software (plugin) used for CS with approproate protocol (newcamd or cccam ONLY). In your case, you use both emulators - built-in (which is not possible to delete) and cccam - resulting in contradiction.
As it is not possible to delete the -vdr-sc built-in emulator, you have to disable it and delete all data you added before (your login, password, server name, port No., etc) and try to adjust the other one installed in your receiver (cccam or mgcamd or oscam (if possible)) using data provided in your subscription page of the billing. Don't forget to reboot your emulator and receiver after each change you make in the settings, otherwise the new settings will not come into force.
2. As I think, you did not even know that the page re: your receiver exists on our forum https://www.cardsharing.cc/index.php?board=54.0
How long ago did you update the image (firmware) of your receiver?
What I can suggest is that you have to check whether there is a new firmware for your receiver appeared or not. If yes, download and install it and try with updated firmware. If not - well, there is no way out, change receiver. Ariva is not in good standing for our server, moreover, one of the models was blacklisted some time ago...
So, try all possible ways.
Waiting for your results.
-
Hi, thank you very much for your help. At the beginning I have to update the firmware. My current is v1.14B3. So this is where I am starting right at this moment. Then I will go through all the set-up and as soon as this is done, I will come back here.....
-
Update:
So I have already updated the receiver to firmware v1.26B3 and set everything up. Unfortunately oscam emulator is not available. So here I chose cccam and inserted all the details from My subscription section. Hopefully all data in good way. Receiver restarted and I will be checking now Connections history.....
-
ano, jedou ..... mohu potvrdit :)
prosim ta ako si to rozbehal? urobil som reset prijimaca, nahodil nanovo udaje zmenil to na cccam ale nejde mi tie nove programy ako hbo2 hd atd... mam 750ku HD
dakujem za odpoved
-
hello,
im problem with new program as HBO2 HD and etc...
Im tried reset my receiver, set to ma login parameters and switch server to cccam and doesnt work it :( they work only basic programs...
where could be problem?
thanks for your answer
-
ano, jedou ..... mohu potvrdit :)
prosim ta ako si to rozbehal? urobil som reset prijimaca, nahodil nanovo udaje zmenil to na cccam ale nejde mi tie nove programy ako hbo2 hd atd... mam 750ku HD
dakujem za odpoved
Ahoj,
moje príspevky si môžeš prečítať vyššie.Uvidíš, kde som robil chyby ja. Princíp je v tom, aby si vymazal svoje zadanie, čo sa týka protokolu newcamd a nahradil údajmi pre cccam zo svojho účtu. Restart prijímača a prekontroluj, že máš všetko zadané a spustené len pre jeden emulátor !!!
Viz upozornenie od admina : 03 Prosinec 2020, 14:41:21 - keď prečítaš všetky príspevky v tomto vlákne, verím, že sa ti to podarí.
-
Hello, my account Mazmed and my Skylink programs don´t work for a few weeks. VIP Astra is going perfectly. I use cccam in AMIKO Mini HD265. Can you help me ? I tried to delete all channels and rescan them manually, to install new soft, and no change. Only skylink channels don´t work. thx
-
Hello, my account Mazmed and my Skylink programs don´t work for a few weeks. VIP Astra is going perfectly. I use cccam in AMIKO Mini HD265. Can you help me ? I tried to delete all channels and rescan them manually, to install new soft, and no change. Only skylink channels don´t work. thx
Try other receiver. If everything is working with other receiver, the only way is to stop using your AMIKO Mini HD265
-
I wish you a good day,
looking at the history of the Blacklist, I found that I had the connection 1.8.2021 blocked! But I had the connection logged off (suspended) from 18.7. - 10.8.2021 and the apartment was without electricity due to the holiday and no one had access to the apartment! Even now, after checking the settings of the receiver, I did not find an error in the settings. I'm trying not to break the rules so I don't know how this could have happened?
Your loyal Ronofix user
PS - sorry to write this thread, could not find a suitable thread.
-
Hi,
According to your connections history, you had several violations, not only 01.08.2021:
30.08.2021 16:09:18 (19 hours ago) Launching more than one emulator using one receiver Violation
18.08.2021 00:33:25 (13 days ago) Launching more than one emulator using one receiver Violation
12.08.2021 20:32:42 (18 days ago) Launching more than one emulator using one receiver Violation
10.08.2021 13:24:22 (2642 years from now) Launching more than one emulator using one receiver Violation
07.08.2021 19:18:02 (23 days ago) Launching more than one emulator using one receiver Violation
01.08.2021 07:01:40 (1 month ago) Frequent reconnections to the server Violation IP BLOCKING
Now, everything is OK, but you have to check your emulators - 1 or 2 emu are used at a time. If you have more than 1 emulator installed, you have to delete another one. At the moment, Cccam emulator with Cccam protocol is used - TV Joj (skylink), and it's OK.
-
Hi,
According to your connections history, you had several violations, not only 01.08.2021:
30.08.2021 16:09:18 (19 hours ago) Launching more than one emulator using one receiver Violation
18.08.2021 00:33:25 (13 days ago) Launching more than one emulator using one receiver Violation
12.08.2021 20:32:42 (18 days ago) Launching more than one emulator using one receiver Violation
10.08.2021 13:24:22 (2642 years from now) Launching more than one emulator using one receiver Violation
07.08.2021 19:18:02 (23 days ago) Launching more than one emulator using one receiver Violation
01.08.2021 07:01:40 (1 month ago) Frequent reconnections to the server Violation IP BLOCKING
Now, everything is OK, but you have to check your emulators - 1 or 2 emu are used at a time. If you have more than 1 emulator installed, you have to delete another one. At the moment, Cccam emulator with Cccam protocol is used - TV Joj (skylink), and it's OK.
Thank you for your response.
Because violations of the rules have been detected so far, I checked everything and at least I think it's well set up.
I would ask you to advise me where I should look. I've dealt with this higher in this thread when the encoding on Skylink has changed and I don't know where this is going.
But how are possible violations when I didn't have the receiver turned on and I was suspended?
-
Irdeto 0624 will remain, so no problem for now.
ahoj, neviete mi poradiť,či pojde RTVS sport a Joj Sport na cadshare?
-
To Brano : Pokial viem, zatial ide len cez pozemné vysielanie. Jojka má zmluvu so Skylinkom, takže otázka času ...
-
vše jede OK, teď jsem proladil …..