Emulator Mgcamd 1.45c (MIPS and SH4) with SkyDe support

[TechGuy]

Emulator Mgcamd 1.45c with SkyDe support

[marcoxx]

Question: Is this working with a receiver with ARM CPU? And how can i install this mgcamd ZIP-File? It is not a .ipk file inside or so....

[Jogi]

As already requested
+ I would also like an SH4 version of this Mgcamd with long ecm support - please

[gregordastier]

Hi all,

I already understood, that it is necessary to use MGCAMD 1.45c in order to make it running properly again.
I downloaded the file the CSS-team provided but now I have one question:

- how can I install the MIPS-file?
- or do I need to use the .zip-file
- the newest mgcamd-softcam on openpli is MGCAMD 1.38c

By the way I am using OpenPLI 7.0.

Can you guys maybe provide a short instruction how to use the MIPS-File.

Thank you in advance.

BR
Greg

[suma]

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

[marcoxx]

Ok it seams there is NO 1.45x mgcamd version for ARM CPU based receiver. So i use OSCAM in future, but the ORF package not work with OSCAM and newcamd protocol - only the oscam with cccam protocal work at this time with ORF. Is this a error only i have or a problem with server?

[marcoxx]

Hello,

when u have a MIPS based receiver and use 1.38c, in the rusian sector of this forum the users say you should only copy the mips file inside the ZIP over the old 1.38c one with FTP and restart. I cannot test this i have a 4k receiver with ARM CPU. But perhaps test it.

But the easiest way is to install the OSCAM version for your box and use the cccam or newcamd protocol settings you find in the mysubcription area!

Hi all,

I already understood, that it is necessary to use MGCAMD 1.45c in order to make it running properly again.
I downloaded the file the CSS-team provided but now I have one question:

- how can I install the MIPS-file?
- or do I need to use the .zip-file
- the newest mgcamd-softcam on openpli is MGCAMD 1.38c

By the way I am using OpenPLI 7.0.

Can you guys maybe provide a short instruction how to use the MIPS-File.

Thank you in advance.

BR
Greg

[TechGuy]

Hello

Mgcamd 1.45c for SH4 will be next week (I hope)
For ARM it is not possible to create version with Sky support

Right now we are working on Cccam emulator patch

[Jogi]

ORF also works with Oscam and Newcamd protocol
If you get it working by switching from newcamd to ccam protocol only (leave other files and configuration as it is, there is something wrong in the reader configuration
if you use ccam protocol with several caids running through one reader, you should use the paramter disablecrccws_only_for = 098C:000000 to disable this chedksum-config only for caid 098c (if you use newcamd protocol there is only caid 098c running on the reader, so no need to specify)

[marcoxx]

All what i do is do change the settings in oscam.server i found to the newcamd protocol and the cccam protocol. When i use the cccam protocol settings for oscam.server file all i.s. o.k. When i change this to the  newcamd protocol settings for oscam.server file ORF not works.

ORF also works with Oscam and Newcamd protocol
If you get it working by switching from newcamd to ccam protocol only (leave other files and configuration as it is, there is something wrong in the reader configuration
if you use ccam protocol with several caids running through one reader, you should use the paramter disablecrccws_only_for = 098C:000000 to disable this chedksum-config only for caid 098c (if you use newcamd protocol there is only caid 098c running on the reader, so no need to specify)

[marcoxx]

So for my understanding. I should set the disablecrccws = 1 to disablecrccws = 0 for all other caid when i use newcamd protocol and only leave the setting in oscam.server to disablecrccws = 1 on caid 098c? right?

All what i do is do change the settings in oscam.server i found to the newcamd protocol and the cccam protocol. When i use the cccam protocol settings for oscam.server file all i.s. o.k. When i change this to the  newcamd protocol settings for oscam.server file ORF not works.

ORF also works with Oscam and Newcamd protocol
If you get it working by switching from newcamd to ccam protocol only (leave other files and configuration as it is, there is something wrong in the reader configuration
if you use ccam protocol with several caids running through one reader, you should use the paramter disablecrccws_only_for = 098C:000000 to disable this chedksum-config only for caid 098c (if you use newcamd protocol there is only caid 098c running on the reader, so no need to specify)

[Gladbach]

I'm using a Dreambox 800 and OoZooN (Enigma2) with Mgcamd 1.38. Can someone please explain to me how to update the Mgcamd Version? Don't know what to to with the file...

[gregordastier]

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

Hi Suma,

My receiver is VU Plus Solo SE V2
Image: OpenPli 7.0
Softcam: CCCam 2.30

I used to use this combination for many years and everything has been running well.

My question is:
- is the MIPS-file you have provided in the DOWNLOAD area compatible with my receiver?
- will the sh4-file will be compatible with my receiver again?

Basically i used to download the softcam via OPENPLI --> PLUGINS --> SOFTCAM. Unfortunately the MGCAMD 1.45c is not available at present. The newest MGCAMD I can use on OPENPLI 7.0 is 1.38c.
Can you explain to me how can I add 1.45c to my OPENPLI 7.0, maybe via memory stick?

Thank you in advance for your support.

BR
GREG

[marcoxx]

Tipp: Vervollständige dein Profil falls du Antwort bekommen möchtest! "ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted"

another tipp: install OSCAM and use cccam protocol with this!

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

Hi Suma,

My receiver is VU Plus Solo SE V2
Image: OpenPli 7.0
Softcam: CCCam 2.30

I used to use this combination for many years and everything has been running well.

My question is:
- is the MIPS-file you have provided in the DOWNLOAD area compatible with my receiver?
- will the sh4-file will be compatible with my receiver again?

Basically i used to download the softcam via OPENPLI --> PLUGINS --> SOFTCAM. Unfortunately the MGCAMD 1.45c is not available at present. The newest MGCAMD I can use on OPENPLI 7.0 is 1.38c.
Can you explain to me how can I add 1.45c to my OPENPLI 7.0, maybe via memory stick?

Thank you in advance for your support.

BR
GREG

[gregordastier]

Tipp: Vervollständige dein Profil falls du Antwort bekommen möchtest! "ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted"

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

Hi Suma,

My receiver is VU Plus Solo SE V2
Image: OpenPli 7.0
Softcam: CCCam 2.30

I used to use this combination for many years and everything has been running well.

My question is:
- is the MIPS-file you have provided in the DOWNLOAD area compatible with my receiver?
- will the sh4-file will be compatible with my receiver again?

Basically i used to download the softcam via OPENPLI --> PLUGINS --> SOFTCAM. Unfortunately the MGCAMD 1.45c is not available at present. The newest MGCAMD I can use on OPENPLI 7.0 is 1.38c.
Can you explain to me how can I add 1.45c to my OPENPLI 7.0, maybe via memory stick?

Thank you in advance for your support.

BR
GREG

@ maroxx:
Wie vervollständige ich mein Profil. Wo muss ich es eintragen? Welche Informationen werden benötigt?
Ist diese LOG-File nötig bei dieser Art von Fragen?
Danke Marco

[marcoxx]

Oben unter deinem Benutzerlogin Logo siehst den Link "Profil" - "Forum Profil" dort solltest du unter Signatur eintragen welche Hardware verwendet wird und halt so alles was wichtig ist zu wissen. z.B. das was du geschrieben hast:
VU Plus Solo SE V2
,OpenPli 7.0
,CCCam 2.30

Log-File ist bei solchen Anfragen nicht notwenig!

Tipp: Vervollständige dein Profil falls du Antwort bekommen möchtest! "ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted"

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

Hi Suma,

My receiver is VU Plus Solo SE V2
Image: OpenPli 7.0
Softcam: CCCam 2.30

I used to use this combination for many years and everything has been running well.

My question is:
- is the MIPS-file you have provided in the DOWNLOAD area compatible with my receiver?
- will the sh4-file will be compatible with my receiver again?

Basically i used to download the softcam via OPENPLI --> PLUGINS --> SOFTCAM. Unfortunately the MGCAMD 1.45c is not available at present. The newest MGCAMD I can use on OPENPLI 7.0 is 1.38c.
Can you explain to me how can I add 1.45c to my OPENPLI 7.0, maybe via memory stick?

Thank you in advance for your support.

BR
GREG

@ maroxx:
Wie vervollständige ich mein Profil. Wo muss ich es eintragen? Welche Informationen werden benötigt?
Ist diese LOG-File nötig bei dieser Art von Fragen?
Danke Marco

[gregordastier]

@Marco:
Thank you for your support.
BR Greg

[marcoxx]

Oben unter deinem Benutzerlogin Logo siehst den Link "Profil" - "Forum Profil" dort solltest du unter Signatur eintragen welche Hardware verwendet wird und halt so alles was wichtig ist zu wissen. z.B. das was du geschrieben hast:
VU Plus Solo SE V2
,OpenPli 7.0
,CCCam 2.30

Log-File ist bei solchen Anfragen nicht notwenig!

Check mal OPENPLI --> PLUGINS --> SOFTCAM und installiere OSCAM und trage dann die Daten ein wo du unter cccam oder newcamd findest unter deiner Linie! Ist echt einfach und klappt super!

Tipp: Vervollständige dein Profil falls du Antwort bekommen möchtest! "ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted"

What is your receiver? Which emulator was used before? Complete your signature, I am going to ask you a million questions otherwise...

Hi Suma,

My receiver is VU Plus Solo SE V2
Image: OpenPli 7.0
Softcam: CCCam 2.30

I used to use this combination for many years and everything has been running well.

My question is:
- is the MIPS-file you have provided in the DOWNLOAD area compatible with my receiver?
- will the sh4-file will be compatible with my receiver again?

Basically i used to download the softcam via OPENPLI --> PLUGINS --> SOFTCAM. Unfortunately the MGCAMD 1.45c is not available at present. The newest MGCAMD I can use on OPENPLI 7.0 is 1.38c.
Can you explain to me how can I add 1.45c to my OPENPLI 7.0, maybe via memory stick?

Thank you in advance for your support.

BR
GREG

@ maroxx:
Wie vervollständige ich mein Profil. Wo muss ich es eintragen? Welche Informationen werden benötigt?
Ist diese LOG-File nötig bei dieser Art von Fragen?
Danke Marco

[marcoxx]

Check mal OPENPLI --> PLUGINS --> SOFTCAM und installiere OSCAM und trage dann die Daten ein wo du unter cccam oder newcamd findest unter deiner Linie! Ist echt einfach und klappt super!

@Marco:
Thank you for your support.
BR Greg

[gregordastier]

@Marco:
Danke für den Tipp. Werde ich machen. Melde mich danach.
Gruss
Gregor