CardSharing Server ENG > Configs
issue with connecting to the server - zgemma openAtv newcamd and oscam
heniek:
hi,
I use zgemma H9 twin, OpenATV 6.3, newcamd with oscam-stable, suddenly i'm not able to connect to the server
here are the logs:
(main) System name = Linux
(main) Host name = zgemmah9twin
(main) Release = 4.4.35
(main) Version = #1 SMP Sun Aug 25
(main) Machine = armv7l
(main) Stb model = h9combo
(main) Stb boxtype = h9combo
(main) creating pidfile /var/tmp/oscam-stable.pid with pid 2192
(config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
(main) signal handling initialized
(led) LED support is not active. Can't detect machine type.
(net) cccam: initialized (fd=4, port=12000)
(reader) nc+_main [newcamd] creating thread for device server(...)
(reader) nc4k_main [newcamd] creating thread for device server(...)
(main) waiting for local card init
(newcamd) proxy server(...) newcamd525 (fd=0)
(newcamd) proxy server(...) newcamd525 (fd=0)
(reader) nc4k_main [newcamd] proxy initialized, server server(...)
(reader) nc+_main [newcamd] proxy initialized, server server(...)
(webif) webif: decompressed 1722 bytes back into 4138 bytes
(webif) HTTP Server running. ip=:: port=83
(main) init for all local cards done
(emmcache) loading emmcache disabled since no reader is using it!
(emmcache) loading emmstats disabled since no reader is using it!
(client) plain dvbapi-client granted (dvbapi, au=off)
(dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-stable/oscam.ccache
(dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 5 maximum number of filters is 64 (oscam limit is 64)
(dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument
as advised by the moderator I tried some changes and edited oscam.conf file, different values for boxtype value in the [dvbapi] section, but changing that with sat receiver restart didnt help..
oscam.conf file content:
[global]
[cccam]
port = 12000
version = 2.3.2
[dvbapi]
enabled = 1
au = 0
user = dvbapi
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255,fd00::-fdff:ffff:ffff:ffff:ffff:ffff:ffff:ffff,2000::-3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff,::1
httphideidleclients = 0
google shows similar issue where logs are almost the same, but in my case I also used FileZilla but only to upload few mp4 files to the sat receiver
https://www.linuxsat-support.com/thread/141269-oscam-emu-zgemma-h9s-setup/
any hint how to solve that ?
thanks
xtruex:
oscam.conf
--- Код: ---
[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
[cache]
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = vuplus-team.com
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = vuplus
[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1
--- Конец кода ---
heniek:
currently the logs show sth else, but still no signal..
(dvbapi) demuxer 0 ecmpid 0 CAID: 1803 ECM_PID: 01F5 PROVID: 000000
(dvbapi) demuxer 0 found 4 ECM pids and 5 STREAM pids in CA PMT
(dvbapi) demuxer 0 no suitabe readers found that can be used for decoding!
(dvbapi) demuxer 0 no enabled matching ecmpids -> deocding is waiting for matching readers!
xtruex:
oscam.conf from zgemma H9
--- Код: ---[global]
[cccam]
port = 12000
reshare = 0
version = 2.3.0
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
--- Конец кода ---
xtruex:
You are using CCcam 2.1.4 and watching CBS Europa (cyfra)
Навигация
Перейти к полной версии