Hi,
are there any problems with the SRG package? All channels from the VIP package run great with an average timing of approx. 500 ms.
With the SRG package, the ECM response usually takes around 1060ms.
The picture freezes approximately every 10 seconds. In the LIVE log I observe that it works for 2 keys.
The picture then mostly freezes at the 3rd key. However, the log shows no errors, a key comes every 10 seconds.
This only affects the SRG package. Here is an excerpt from the Oscam log:
2020/06/11 05:03:12 (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
2020/06/11 05:03:12 (dvbapi) Demuxer 0 found 2 ECMpids and 8 STREAMpids in caPMT
2020/06/11 05:03:12 (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
2020/06/11 05:03:12 (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0500 PROVID 050800 ECMPID 02E3 ANY CHID PMTPID 01FF VPID 0200
2020/06/11 05:03:13 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): cache1 (7 ms) by "S1-SRG-SWISS" (P/2/4/4) - SRF zwei HD (cw count 2)
2020/06/11 05:03:13 (dvbapi) Demuxer 0 found 2 ECMpids and 8 STREAMpids in PMT
2020/06/11 05:03:17 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1067 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:27 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1073 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:37 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1064 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:47 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1061 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
2020/06/11 05:03:57 (ecm) **User** (CAID:0500-PROVID:050800-CHID:08E2-PID:02E3-SRVID:4332-L:2A-CW:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1065 ms) by "S1-SRG-SWISS" (F/4/4/4) - SRF zwei HD
This is the configuration for the SRG package:
[reader]
label = "S1-SRG-SWISS"
protocol = newcamd
device = XXXXXX.xxx,00000
key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
user = **user**
password = **********
inactivitytimeout = 300
group = 1
disablecrccws = 1
audisabled = 1
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
ident = 0500:050800,040810
Please check it, Thanks..