Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Emulators&Plugins (discussion) => Тема начата: rubarb007 от 19 Сентября 2011, 23:34:39
-
Hi
Setup is in signature.
I have Peter Pan Neverland image installed, which was working perfectly well on a previous service I was using (they used cccam 2.1.4).
I have downloaded and installed mgcamd 1.35a, have copied all the ignore.list / priority.list, cfg etc in Suma's links in profile. However, when I try to use mgcamd I keep getting 'No ecm information' and it will not decode the channels.
I also have Oscam installed, and this seems to decode SOME of the channels but not all. And also takes 10 - 15 seconds to decode the channels it does display.
Any help would be greatly appreciated as I don't know what I'm doing wrong :(
-
Hi,
Reasons may be various.
1. Image
2. MgCamd emulator.
Try to change image first.
regards
-
Hi Suma,
I have tried various images. All have the same problem.
I have tried Peter Pan Neverland, Oozoon, Dream Elite, ramiMAHER-v19-dm800HD-9-20-2011 and Black Hole 1.6.5
-
Have you obeyed this http://www.cardsharing.cc/index.php?topic=24626.msg62998#msg62998 ?
Provide log-file when start connecting to the server.
Don't forget replace server name and port # with XXX
-
hi suma,
I downloaded the ignore / priority lists from your signature? I assumed that they already contained the necesarry information as said in that thread?
-
Suma,
Are you able to recommend a good 'patched' image to use on a DM800 HD PVR (clone)?
I have been struggling for 3 days now to get my dreambox working with your service and I'm about to kick it through the wall :(
-
I'm about to kick it through the wall :(
Good solution!
visit www.domica.biz (registration is required), download and install Domica image (to my mind, the best for today). Description of Domica image is available on the forum http://www.cardsharing.cc/index.php?topic=26388.0
-
hi suma,
I downloaded the ignore / priority lists from your signature? I assumed that they already contained the necesarry information as said in that thread?
That was the latest upload to the forum, everything is working fine with these lists.
-
I'm about to kick it through the wall :(
Good solution!
visit www.domica.biz (registration is required), download and install Domica image (to my mind, the best for today). Description of Domica image is available on the forum http://www.cardsharing.cc/index.php?topic=26388.0
Is this suitable for clone boxes?
-
It depends on bootloader version. Any Domica image is good (7 or 8 ).
-
i have bl 82
I have registered on the site, but it is also russian and google translator is not doing a very good job at translating it. I cannot find a link to download the domica image :( are you perhaps able to PM me a link to it? Sorry to be a pain. I have reinstalled Peter Pan image now, installed mgcamd, copied your files (from your signature) and still nothing at all. I am going to install Oscam soon and try that as really do not know what else I can try.
-
http://www.domica.biz/index.php?topic=9967.0
-
Thanks Suma,
So just to confirm, thats ok to load onto a clone DM800 HD with BL82?
-
downloaded what appears to be the dm800 version but when i tried to flash it, i get error 'wrong architecture'.
I have sim 2.01 i believe.
-
sim2.01 SSl 82
http://www.domica.biz/index.php?topic=8072.msg66508#msg66508
-
sim2.01 SSl 82
http://www.domica.biz/index.php?topic=8072.msg66508#msg66508
I already have bl82 on my box. but the domica image I downloaded doesn't appear to be for my particular box. Not sure whats going on :(
I just get 'wrong architecture' message
-
This image?
http://www.upload.metabox.ru/index.php?PHPSESSID=6e356265bbd90840405084dc00fbe8a6&action=dlattach;topic=773.0;attach=2568
-
This image?
http://www.upload.metabox.ru/index.php?PHPSESSID=6e356265bbd90840405084dc00fbe8a6&action=dlattach;topic=773.0;attach=2568
I just installed that image, and now i have 'error, no CA found'
So i guess its back to serial cable and putting bl82 back on.
I think I need to give up and find another service because i've wasted 3 days and a lot of time trying to get this working :(
-
This image?
http://www.upload.metabox.ru/index.php?PHPSESSID=6e356265bbd90840405084dc00fbe8a6&action=dlattach;topic=773.0;attach=2568
I think I need to give up and find another service because i've wasted 3 days and a lot of time trying to get this working :(
yes, do it
-
yes, do it
[/quote]
So just waste my money?
Suma, can you give me link to how I enable logging please so I can send log? Neither Oscam or mgcamd 1.35 are working now :(
-
'error, no CA found'
it's bug, update only loader
-
yeah, have done that :)
but had problem with domica image, kept getting unknown hardware errors and it would not detect my receivers :(
Have installed Elite Black hole now but still no joy with any cams :(
-
Have installed Elite Black hole now but still no joy with any cams :(
http://www.cardsharing.cc/index.php?topic=27638.msg76543#msg76543
-
i see a few errors in the log, but unfortunately I don't know what they mean :(
Sep 20 20:40:31 192.168.0.13 tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
Sep 20 20:40:31 192.168.0.13 [mg] Net:1:7:0:7s Show ecm:1, emm:0 Up:2 Au:1 Dir:0 Osd:no:80:0 Cache:0 Log:3:192.168.0.16:514 Reread:0
Sep 20 20:40:31 192.168.0.13 [mg] Ecm cache time: 0
Sep 20 20:40:31 192.168.0.13 Box type: mips dreambox (dm7025, dm800)
Sep 20 20:40:31 192.168.0.13 /dev/dvb/adapter0/ca3 error 2: No such file or directory
Sep 20 20:40:31 192.168.0.13 Conax.Key error 2: No such file or directory
Sep 20 20:40:31 192.168.0.13 Keys readed
Sep 20 20:40:31 192.168.0.13 AutoRoll.Key error 2: No such file or directory
Sep 20 20:40:31 192.168.0.13 Conax.Key error 2: No such file or directory
Sep 20 20:40:31 192.168.0.13 ignore prov 0500:008110
Sep 20 20:40:31 192.168.0.13 4AE1:000000:002C
Sep 20 20:40:31 192.168.0.13 newcamd keep alive: 600, incoming port: 0
Sep 20 20:40:31 192.168.0.13 [mgcam] emm thread started
Sep 20 20:40:34 192.168.0.13 got 82 cmd 9F
Sep 20 20:40:34 192.168.0.13 [mg0] namespace 11A0000 t-id 7E7 on-id 2
Sep 20 20:40:34 192.168.0.13 [mg0] descramble on 1, source 0
Sep 20 20:40:35 192.168.0.13 [mg0] service 153A index 0 pmt pid 109 (1), pids: video 0x0202, audio 0x0282
Sep 20 20:40:35 192.168.0.13 CaPID: 0x0514 ProvID: 000000
Sep 20 20:40:35 192.168.0.13 [mg0] network can't decode
Sep 20 20:40:35 192.168.0.13 [mg0] pid 0x0514 failed to decode.
Sep 20 20:40:35 192.168.0.13 [mgcamd] emm started
Sep 20 20:40:35 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 20:40:35 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 20:40:35 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 20:40:35 192.168.0.13 [mgcamd] emm stopped
-
delete all from softcam
free channels work ?
-
delete all from softcam
free channels work ?
hi xtruex
Yes free channels work.
What do you mean delete all from softcam? Do you mean uninstall them all??
-
delete softcam from /etc/keys
-
does this look like a correct newcamd.list file contents:
CWS_KEEPALIVE = 600
#Example :
#CWS = server.com 10001 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
# Just put below automaticaly generared CWS line(s) from billing, and reboot emulator.
cs357x://username:password@serv1.somehwere:111111
-
delete softcam from /etc/keys
I removed softcam.Key?
This is what is shown in the log when i change channels:
Sep 20 21:06:24 192.168.0.13 [mg0] stoping camd..
Sep 20 21:06:25 192.168.0.13 got 151 cmd 9F
Sep 20 21:06:25 192.168.0.13 [mg0] namespace 11A0000 t-id 7D7 on-id 2
Sep 20 21:06:25 192.168.0.13 [mg0] descramble on 1, source 0
Sep 20 21:06:25 192.168.0.13 [mg0] service 10CF index 0 pmt pid 101 (2), pids: video 0x0206, audio 0x029A 0x02AE 0x0286 0x0902
Sep 20 21:06:25 192.168.0.13 CaPID: 0x0501 ProvID: 000000
Sep 20 21:06:25 192.168.0.13 [mg0] network can't decode
Sep 20 21:06:25 192.168.0.13 [mg0] pid 0x0501 failed to decode.
Sep 20 21:06:25 192.168.0.13 [mgcamd] emm started
Sep 20 21:06:25 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:06:25 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:06:25 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:06:25 192.168.0.13 [mgcamd] emm stopped
-
You buy Newcamd525 or camd3 protocol ?
-
You buy Newcamd525 or camd3 protocol ?
camd3
-
after removing softcam.key, log now looks like this on startup:
Sep 20 21:11:52 192.168.0.13 tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
Sep 20 21:11:52 192.168.0.13 [mg] Net:1:7:0:7s Show ecm:1, emm:0 Up:2 Au:1 Dir:0 Osd:no:80:0 Cache:0 Log:3:192.168.0.16:514 Reread:0
Sep 20 21:11:52 192.168.0.13 [mg] Ecm cache time: 0
Sep 20 21:11:52 192.168.0.13 Box type: mips dreambox (dm7025, dm800)
Sep 20 21:11:52 192.168.0.13 /dev/dvb/adapter0/ca3 error 2: No such file or directory
Sep 20 21:11:52 192.168.0.13 Conax.Key error 2: No such file or directory
Sep 20 21:11:52 192.168.0.13 SoftCam.Key error 2: No such file or directory
Sep 20 21:11:52 192.168.0.13 AutoRoll.Key error 2: No such file or directory
Sep 20 21:11:52 192.168.0.13 Conax.Key error 2: No such file or directory
Sep 20 21:11:53 192.168.0.13 4AE1:000000:0029
Sep 20 21:11:53 192.168.0.13 4AE1:000000:0029
Sep 20 21:11:53 192.168.0.13 4AE1:000000:0029
Sep 20 21:11:53 192.168.0.13 4AE1:000000:0028
Sep 20 21:11:53 192.168.0.13 4AE1:000000:0029
Sep 20 21:11:53 192.168.0.13 4AE1:000000:002C
Sep 20 21:11:53 192.168.0.13 4AE1:000000:002C
Sep 20 21:11:53 192.168.0.13 [mgcam] emm thread started
Sep 20 21:11:55 192.168.0.13 got 151 cmd 9F
Sep 20 21:11:55 192.168.0.13 [mg0] namespace 11A0000 t-id 7D7 on-id 2
Sep 20 21:11:55 192.168.0.13 [mg0] descramble on 1, source 0
Sep 20 21:11:55 192.168.0.13 [mg0] service 10CF index 0 pmt pid 101 (1), pids: video 0x0206, audio 0x029A 0x02AE 0x0286 0x0902
Sep 20 21:11:55 192.168.0.13 CaPID: 0x0501 ProvID: 000000
Sep 20 21:11:55 192.168.0.13 [mg0] network can't decode
Sep 20 21:11:55 192.168.0.13 [mg0] pid 0x0501 failed to decode.
Sep 20 21:11:55 192.168.0.13 [mgcamd] emm started
Sep 20 21:11:55 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:11:55 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:11:55 192.168.0.13 CaPID: 0x00C0 ProvID: 000000
Sep 20 21:11:55 192.168.0.13 [mgcamd] emm stopped
-
does this look like a correct newcamd.list file contents:
CWS_KEEPALIVE = 600
#Example :
#CWS = server.com 10001 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
# Just put below automaticaly generared CWS line(s) from billing, and reboot emulator.
cs357x://username:password@serv1.somehwere:111111
Change to Newcamd525, then copy and paste to newcamd.list
#Example :
#CWS = server.com 10001 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
it's for camd3.server file only
cs357x://username:password@serv1.somehwere:111111
-
ok, will try. will let you know tomorrow how I get on. Thank you for your help so far.
it's for camd3.server file only
cs357x://username:password@serv1.somehwere:111111
That is the line i was told to enter into newcamd.list file by the site after signing up?
-
for camd3
create file /etc/keys camd3.map and paste this
0960:00000:FFFF:FFFF=0963:00000:FFFF:FFFF
to camd3.servers write you sharing settings from billing
cs357x://username:password@serv1.somehwere:111111
-
for mgcamd_1.35x
newcamd.list Example
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = server.com 10001 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
-
I have changed protocol so think I can only try to login / use the service tomorrow at 6am??
-
I have changed protocol so think I can only try to login / use the service tomorrow at 6am??
for newcamd setting tomorrow after 6am
for camd3 you can watch today, you need install camd3
-
changed to newcamd and service worked yesterday :)
today it seems that Sky UK package may have issues as I am unable to decode any encrypted channels.
-
[mg0] <- CW from newcamd serv1:XXXXX (177ms)
[mg0] 177 msec -- Thu Sep 22 11:24:08 2011
===== NDS ECM on CaID 0x0963, pid 0x0513 ======
prov: 000000
cw0:0 50 13 E5 48 E5 10 44 39
cw1:0 39 FF B7 EF 79 89 EF F1