CardSharing Server ENG > Emulators&Plugins (discussion)
MPCS. Description
suma:
When you purchased this package, you have probably specified the camd3 protocol.
So, don't try to run sharing using another protocol. It will not work. use camd3 only!
regards
suma:
camd35 protocol[/b]
MPCS.conf
=================
[global]
Nice = -20
ClientTimeout = 5
LogFile = stdout
[serial]
Device = tuner@/dev/ttyS0?delay=1&timeout=400
Please check the number of COM port:ttyS0=сом1,....ttyS1=сом2
MPCS.server
=================
[reader]
Label = VIP
Protocol = camd35
Device = ххххх.хххххх.org,10000 (IP-server address,port No.you will receive this information after you paid in the BILLING)
Account = Login,Password (login,password via comma;they shoud be the same as for the BILLING)
Fallback = 0
Group = 1
MPCS.user
=================
[account]
User = tuner
Pwd = tuner
Group = 1
suma:
These settings were tested with Openbox 600,620,300,800,820, Samsung9500...try them, all should work.
mpcs CONF
[global]
Nice = -20
#LogFile = log
#LogFile = /dev/tty
ClientTimeout = 5
LogFile = stdout
[serial]
Device = tuner@/dev/ttyS1?delay=1&timeout=300
COM-port No. is highlighted with red:0 corresponds to 1 СОМ-port, 1- to the second СОМ-port respectively.
mpcs.server
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = 1111.2223.44,90001
Account = login,password
CAID = 0500
IDENT = 0500:0ххххх
Group = 1
#Fallback = 1
mpcs.user
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
IDENT = 0500:0ххххх
__________----------------__________________-----------------------____________________
Those parts where you should enter your data are highlightedwith red
Please remember that the latest version of the MPCS software is better and more stable than previous one. You may download it from here:
http://www.cardsharing.cc/index.php?topic=550.0
If you used old MPCS version and want to change it to the latest one, you need ONLY replace the files, except for those with your settings: mpcs.CONF, mpcs.server и mpcs.user
Please also note that MPCS does not always work correctly with connectors USB->СОМ-port
tete:
Suma,
will MPCS work with a cccam server
ie can we have a reader section with cccam protocol?
suma:
As soon as I know, MPCS works by itself (without any cccam server). If your receiver has newcamd, MPCS will work with newcamd. But MPCS is very inconvenient in use. To start it, you need PC always working.
Навигация
Перейти к полной версии