Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => Sky Deutschland HD 19E => Тема начата: Curval от 24 Февраля 2013, 13:52:19
-
Hello *,
i got freezes every minutes. I start my subscription yesterday. Since then nothing works.
I have a DM800 with Mgcamd v1.38. I use the configfiles you provide.
I changed the Server from 3 to 1 but still freezes.
In the Logfile:
[newcamd] server1xxx: problem, will try to reconnect
[mg0] trying 0x1833 -> 0x1702
[mg0] trying 0x1833 -> 0x1702
...
and:
...
[mg0] network can't decode
[mg0] trying 0x1833 -> 0x1702
[mg0] network can't decode
[mg0] pid 0x18BC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1CBC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1BBC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1DBC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1FBC failed to decode.
[mg0] network can't decode
[mg0] pid 0x1ABC failed to decode.
[mg0] network can't decode
[mg0] pid 0x19BC failed to decode.
...
i changed mg_cfg config to "K: { 08 }"
but still freezes
Ping to server2 and server3 at 85ms.
Ping to server1 at the moment(still freeze) no response....
Did you block me or can i always not ping the active server?
What can i do?
-
use mgcamd 1.35a.
1.38 is not recomended i believe
-
http://www.cardsharing.cc/index.php?topic=28915.0
-
now i tried 1.35a. It freeze after seconds :-(
-
Again the last log entry before freeze shows:
[mg0] network can't decode
Did i have to put in more then the cws lines into the newcamd.list?
-
Download recomended settings for mgcamd
http://www.cardsharing.cc/index.php?action=dlattach;topic=28084.0;attach=1975
Your mg_cfg or replace.list is not correct
-
I already used these recomended settings before. But ok i replace them again and... nothing.
After restarting the emu the screen freeze again after some seconds.
-
Which image is used? Download and install Domica, download and install all recommended settings. Delete softcam.key, if any.
-
I use the current image from ramiMAHER, and no i will not change it and i will not paint my door black.
I delete the softcam.key and it still freeze, it's very frustrating.
It freeze on every HD+ and Sky.DE Channels.
I had an other provider with cccam before there everything works fine.
I made the following:
1. Restart the mgcam (no freeze)
2. I ping your server and got response in 85ms
3. Seconds later the screen freeze again
4. I ping your server again and got just timeout's
It seems your network is alergic to my requests. Please tell me why your server is blocking my requests after some seconds.
-
New log needed
-
Here is the log freeze at 22:03.20
:[mg0] network can't decode
[mg0] trying 0x1833 -> 0x1702
maybe interesting:
Connection to server1.xx:xxxx failed (189000ms)
-
I use the current image from ramiMAHER, and no i will not change it and i will not paint my door black.
If your emulator is using mapping, ident 1702 is wrong
[mg0] trying 0x1833 -> 0x1702
Our working idents are 1833 and 1830.
Sky Deutchland has 1833 ident, HD Plus - 1830.
Looks like your emulator transforms working ident into the wrong one and, consequently, is sending wrong requests to the server.
If you do not want to change firmware and don't want to paint your door black, why, then, are you asking your questions here? Visit ramiMAHER support forum and ask them.
Cheers!
-
In your Signature you have referenced to your provided mgcamd configs. You said use these properties, so i use these properties.
In your provided priority.list you find:
# Premiere 19E
X: { 17 02 }
and Sky.de is the former Premiere
-
There is no Premiere any more, so - you need to delete this line.
It is better that you don't use neither ignore, nor priority or replace lists at all.
Delete them all, restart emulator and try again.
Dreambox is very clever machine and can operate without all those lists.
Moreover, put F: { 00 } in mg_cfg file. By default, it is { 01 }. For SkyDe, 00 value is required.
http://www.cardsharing.cc/index.php?topic=24539.0