Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!

CardSharing Server => Картшаринг сервер. Вопросы и обсуждения шаринга. => SkyLink HD 23E => Тема начата: flukes от 10 Января 2018, 19:01:58

Название: Seznam.cz HD
Отправлено: flukes от 10 Января 2018, 19:01:58
Irdeto (CAID 0624) a Viaccess Orca (0500/051910)

He will work?
Название: Re: Seznam.cz HD
Отправлено: nopez от 10 Января 2018, 20:20:54
It doesn't work right now, only channel with pure Irdeto encryption that works is C-music. I hope we won't be in dark for too long if Skylink decides to switch all channels to this encryption  :-X
Название: Re: Seznam.cz HD
Отправлено: flukes от 26 Января 2018, 22:08:32
The competition The TV Seznam works when it will work here ??
Название: Re: Seznam.cz HD
Отправлено: nopez от 26 Января 2018, 22:52:33
It already works here like for 2 weeks. Same with IconcertsHD, no problem.
Название: Re: Seznam.cz HD
Отправлено: otava5 от 26 Января 2018, 22:59:42
does not work with me ... IConcertsHD and CMusic it works
Название: Re: Seznam.cz HD
Отправлено: flukes от 27 Января 2018, 10:37:27
I have VU Zero, why does not seznam TV work?
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 13:15:37
If it works for nopez, check you settings, internet connection, guys. It can't be so that the channels are working only for one user.
Название: Re: Seznam.cz HD
Отправлено: flukes от 27 Января 2018, 13:30:27
Check you settings, internet connection? Are not you crazy? i-concert and C music WORKS!
Nopez laughs
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 13:37:18
well, what exactly you mean by "settings"? I would say our "setting" is probably partly correct as 99% of channels are working fine. In my case, C-Music + iConcerts decodes just about 5 or 10s then it stops. Seznam doesn't decode at all. The rest of Skylink channels working ok. I pasted here the mgcamd log a week ago so that real troubleshooting can be done, but I was banned. I am also willing to post my mg.cfg. Is anybody willing to help or just say "check your settings" which doesn't help at all.
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 13:50:05
well, what exactly you mean by "settings"? I would say our "setting" is probably partly correct as 99% of channels are working fine. In my case, C-Music + iConcerts decodes just about 5 or 10s then it stops. Seznam doesn't decode at all. The rest of Skylink channels working ok. I pasted here the mgcamd log a week ago so that real troubleshooting can be done, but I was banned. I am also willing to post my mg.cfg. Is anybody willing to help or just say "check your settings" which doesn't help at all.

Have you read my signature? I am not going to ask EVERYBODY to complete his signature, to show log-file, to describe his receiver, etc.
You are ignoring my requests, I will ignore yours.
Have a nice day
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 13:59:18
Just pay attention to the following in this thread:

nopez signature: Dreambox DM525, Newnigma2 daily image, CCcam 2.3.0, VIP Czech
flukes signature: sucks
sly signature: sucks
otava5 signature: Dreambox 525 HD; SKYLINK HD package; CCcam 2.3.0

nopez wrore:
It already works here like for 2 weeks. Same with IconcertsHD, no problem.
It is enough for me to trust him, as he completed his signature specifying all necessary information. No need to ask a log-file, everything works for him.
What will you say?

By "your settings" I mean:
1. firmware (image)
2. mg_cfg settings
3. cccam settings.
By "internet connection" I mean to check the route and tracert to the server. Some internet providers have not so good connection to the server if you add server name to the receiver settings (e.g. server ABC. com). Sometimes, it is better to add server IP address instead of the server name (domain name), e.g. 123.234.345.11
Some internet providers have a bad route to our server. To check this, you will need a special utility called Win MTR. You will see whether the route to our server is broken or not.
Название: Re: Seznam.cz HD
Отправлено: flukes от 27 Января 2018, 14:19:07
It works everything but TV Seznam not.
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 14:19:53
Suma> ok, I admit I wasn't aware this is the condition for help. Now I've hopefully got all needed info in my signature. I am ready to answer all other needed info + provide mgcamd log but before I do it, I would like to be advised what part of the log or CAM configuration to provide just to avoid another ban. My assumption is, no hostnames/IPs, credential and other confidential info, right?
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 14:38:51
I have replaced hostnames with IPs but this doesn't help. I also tried traceroute and it stops on 8th hop but is this really a proof as other channel decodes well..
Here's my mg_cfg

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 03 }

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 }

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 }

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 03 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 03 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dm7025, dm800
# 07 itgate
# 11 sh4 enigma
B: { 11 }
Название: Re: Seznam.cz HD
Отправлено: flukes от 27 Января 2018, 14:39:00
Rewriting to IP did not change anything.

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32 cccamd netclient, card list saved as /tmp/cccamd.info
#    (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 08 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 14:51:04
https://www.cardsharing.cc/index.php?topic=32632.0
https://www.cardsharing.cc/index.php?topic=28612.0
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 15:04:42
One more question to all of you - which protocol is used for sharing? I see, you are using Cccam emulator, but which protocol (newcamd or cccam?)?
Название: Re: Seznam.cz HD
Отправлено: flukes от 27 Января 2018, 15:11:17
I'm using newcamd

The mgcamd_configs_16.10.2013_2.zip setup did not help
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 15:20:55
Will check the links later on - compare config and expected log output - and feed back my findings. Yes, I am also using newcamd.
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 18:31:03
Suma> thank you for suggestions. I downloaded preconfigured files from the above link. I had to adjust windows end of lines as they somehow got there after downloading files, but that's not a problem. after adjusting correct box type, substituting hostnames with IPs I still got the same issue. Seznam TV, Insight HD doesn't decode at all, C-Music and iConcerts stop after while. Rest of channels work ok - receiving cw0, cw1 from server. When changing channel to Seznam TV is says:

[mg0] newcamd route X.X.X.X:<port#> cant decode

on C-Music, after screen freezes I receive timeout
[mg0] irdeto using chid 0000 version 41
[mgcam] read error error 110: Connection timed out
Название: Re: Seznam.cz HD
Отправлено: suma от 27 Января 2018, 19:20:55
I will inform Moderator on the problem, if it really exists, he will check. The problem solution - not earlier than Monday evening (he is at his week-end and he cannot be accessed now).
Название: Re: Seznam.cz HD
Отправлено: sly от 27 Января 2018, 19:24:32
I will inform Moderator on the problem, if it really exists, he will check. The problem solution - not earlier than Monday evening (he is at his week-end and he cannot be accessed now).
ok, thank you! I am ready to provide more in depth logs or anything needed.
Название: Re: Seznam.cz HD
Отправлено: suma от 29 Января 2018, 17:06:34
Hi, the following answer was received from Moderator:
Seznam TV and Insight HD do not work, we are finding solution to make these channels working (some problems on our side), C-Music and iConcerts are working without problem (no freezes).
Those users who has problems watching C-Music and iConcerts (freezes) are required to send log-file to Moderator for check.
Название: Re: Seznam.cz HD
Отправлено: sly от 29 Января 2018, 17:39:00
hi, thank you. is there a way how to send private message with attachment via this forum? I wasn't able to find this option. I've got the log ready but I don't want to post it here to prevent publishing certain data. or any suggestion where to post it?
Название: Re: Seznam.cz HD
Отправлено: flukes от 29 Января 2018, 18:28:05
It already works here like for 2 weeks. Same with IconcertsHD, no problem.

Lies?
Название: Re: Seznam.cz HD
Отправлено: suma от 29 Января 2018, 18:33:43
PM are disabled on the forum. Use Moderator e-mail (moderator at cardsharing.cc)
Название: Re: Seznam.cz HD
Отправлено: sly от 29 Января 2018, 18:40:33
PM are disabled on the forum. Use Moderator e-mail (moderator at cardsharing.cc)
email sent. thank you.
Название: Re: Seznam.cz HD
Отправлено: nopez от 29 Января 2018, 22:44:27
It already works here like for 2 weeks. Same with IconcertsHD, no problem.

Lies?

I'm not lying. Why sould I? I'm just trying to help out. As I have said earlier, it's working fine on my end. CCcam 2.3.0 on newnigma 2 image. No mgcamd or whatsoever. No freezes too.
Название: Re: Seznam.cz HD
Отправлено: suma от 30 Января 2018, 17:56:20
email sent

There is nothing in your log. The first request was decoded OK, but then - error error error. Either mgcamd is frozen, or for some other reasons. The main thing is that your emulator does not send requests to the server after the first request is sent. Consequently, no request - no response. This is not the server problem, this is a problem of your emulator which does not send requests to the server.
Название: Re: Seznam.cz HD
Отправлено: sly от 30 Января 2018, 18:03:59
suma> it looks like that based on information I've got. I will try either different/older version of mgcamd (currently using modified/latest version from this CC server) or will look for cccam client. As I am using older receiver with minor Enigma 2 distro I will need to look for an installation package for this type of architecture (sh4).
Anyway, thanks for your support.
Название: Re: Seznam.cz HD
Отправлено: otava5 от 30 Января 2018, 22:21:05
suma:
to think - VIP Czech can be OK and only Skylink package itself is faulty?
Название: Re: Seznam.cz HD
Отправлено: sly от 30 Января 2018, 22:37:24
I've googled today and it seems that unfortunately there's no cccam client for sh4 architecture. I tried to emulate mgcamd for cccam protocol using G: { 32 } in mg_cfg + /var/keys/cccamd.list but no luck - still the same results. after while it timeouts/hangs. I would be curious what CC server is sending that it makes mgcamd to hang. unfortunatelly these sh4 boxes are really stripped so there is nothing like packet sniffer here so that I could snoop it and analyze in wireshark.

My question to anybody using mgcamd + newcamd protocol. Is iConcerts HD + C-Music working for you? If so, can you help me out (either sending  mgcamd sh4 binary or posting your mg_cfg to compare)?

thanks!
Название: Re: Seznam.cz HD
Отправлено: suma от 31 Января 2018, 06:03:37
suma:
to think - VIP Czech can be OK and only Skylink package itself is faulty?

SkyLink is a part of Vip Czech. Vip Czech cannot be OK, if SkyLink is faulty. It is not faulty, it has some geographically locked features which cannot be overcome by our server.
Название: Re: Seznam.cz HD
Отправлено: suma от 31 Января 2018, 06:05:05
I've googled today and it seems that unfortunately there's no cccam client for sh4 architecture. I tried to emulate mgcamd for cccam protocol using G: { 32 } in mg_cfg + /var/keys/cccamd.list but no luck - still the same results. after while it timeouts/hangs. I would be curious what CC server is sending that it makes mgcamd to hang. unfortunatelly these sh4 boxes are really stripped so there is nothing like packet sniffer here so that I could snoop it and analyze in wireshark.

My question to anybody using mgcamd + newcamd protocol. Is iConcerts HD + C-Music working for you? If so, can you help me out (either sending  mgcamd sh4 binary or posting your mg_cfg to compare)?

thanks!

Have you tried Oscam? I am not sure your receiver supports it, but if so, try it. Easy to install with good results.
Название: Re: Seznam.cz HD
Отправлено: otava5 от 01 Февраля 2018, 11:03:42
suma: interesting ..... CCcam 2.3.0 after switching to Seznam.cz, shut down emulator, newcamd i cccam protocol .... Other programs emulator do not shut down
MgCamd 1.45 emulator does not shut down any program
Название: Re: Seznam.cz HD
Отправлено: suma от 01 Февраля 2018, 11:17:43
suma: interesting ..... CCcam 2.3.0 after switching to Seznam.cz, shut down emulator, newcamd i cccam protocol .... Other programs emulator do not shut down
MgCamd 1.45 emulator does not shut down any program

Probably, issue of compatibility of emulator and firmware?
Was Cccam emulator installed from the feed (internally) or it was installed separately from other sources?
Название: Re: Seznam.cz HD
Отправлено: nopez от 01 Февраля 2018, 15:30:10
suma: interesting ..... CCcam 2.3.0 after switching to Seznam.cz, shut down emulator, newcamd i cccam protocol .... Other programs emulator do not shut down
MgCamd 1.45 emulator does not shut down any program

You have the same settopbox as me, correct me if I'm wrong. Why don't you try Newnigma2 firmware? But you need to install CCcam 2.3.0 manually via telnet. It was removed from the feed long time ago. Mgcamd never worked for me on that specific firmware. And I'm not using newcamd protocol on CCcam emu, just pure CCcam if that helps.
Название: Re: Seznam.cz HD
Отправлено: otava5 от 01 Февраля 2018, 16:43:57
nopez: I have openATV 6 ... Can you link me to your firmware and CCcam emulator? otava51@seznam.cz .... Thnx
Díky
Название: Re: Seznam.cz HD
Отправлено: sly от 04 Февраля 2018, 15:31:09
Have you tried Oscam? I am not sure your receiver supports it, but if so, try it. Easy to install with good results.
I've reconfigured my receiver with Oscam and after two days of testing I have to say that both C-Music and iConcerts are working fine. I've experienced just one crash but it was with bitrate viewer running, so I assume some mgcamd incompatibility caused my previous issues.
Thanks for help and please keep us posted once you come with solution about Seznam TV and Insight HD.
thank you!
Название: Re: Seznam.cz HD
Отправлено: Karlos68 от 06 Февраля 2018, 18:35:45
Seznam Tv ok!!!  Thank you.
Название: Re: Seznam.cz HD
Отправлено: flukes от 06 Февраля 2018, 19:51:55
Karlos, jak si to dokazal?
Название: Re: Seznam.cz HD
Отправлено: sly от 06 Февраля 2018, 20:16:12
Seznam Tv ok!!!  Thank you.
yeah, working fine, thank you too.
the new channel - Travelxp HD doesn't decode. If needed I can paste log.
Название: Re: Seznam.cz HD
Отправлено: Dolfino от 07 Февраля 2018, 23:37:20
Since yesterday everything has gone, I have done nothing at all. I use Openpli + cccam.
Название: Re: Seznam.cz HD
Отправлено: Karlos68 от 08 Февраля 2018, 21:17:41
New programs......caid 0624

Seznam.cz HD.......OK
C-Music cz............OK
iConcert...............OK
TravelXP HD..........OK
Outdoor Channel  HD CZ......11934 V 27500 ........does not work!!!
Название: Re: Seznam.cz HD
Отправлено: sly от 09 Февраля 2018, 00:03:42
New programs......caid 0624

Seznam.cz HD.......OK
C-Music cz............OK
iConcert...............OK
TravelXP HD..........OK
Outdoor Channel  HD CZ......11934 V 27500 ........does not work!!!
I can confirm. Travelxp HD works now.
Outdoor Channel HD + Brazzers TV + Insight TV HD doesn't.