Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: How to get access to the cardsharing server (net card, Linux receivers)  (Прочитано 62807 раз)

suma

  • Гость
How can I quickly and easily get an access to the card-sharing server and start viewing?

1) Select the package you want to share, pay for it (www.cardsharingserver.com)
2) Download and update your receiver with new software.
3) Use the data received after purchasing the selected package(s) in your receiver
and enjoy viewing! It's easy!

suma

  • Гость
Explanation to the item 2 (How to update your receiver?)
« Ответ #1 : 08 Декабря 2006, 08:03:56 »
You can download the software for your receiver here:

Dreambox 500S (http://www.cardsharing.cc/index.php?topic=6.0)
Dreambox 7000S (http://www.cardsharing.cc/index.php?topic=6.0)
Dreambox 7020S (http://www.cardsharing.cc/index.php?topic=6.0)
IPBox 200S, Relook 200S, Mutant 200S, Sezam 7700 (http://www.cardsharing.cc/index.php?topic=4.0)

Software for the other types of receivers are coming soon.

suma

  • Гость
Explanation to item 3 - how to add the data received in the billing?
« Ответ #2 : 08 Декабря 2006, 09:39:26 »
When you receive data from the billing, you will need to create the following line:


EXAMPLE:
NEWCAMD (protocol)  (this data is not real, you will need to replace these data to those which you see in the billing page)
CWS = sharing.dyndns.org 10000 name password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan server
where
sharing.dyndns.org - server host (instead of IP-address)
10000 - access port
name - login
password - password
01 02 03 04 05 06 07 08 09 10 11 12 13 14 - DEC key
wan - connection type (don't change!)
server - server name (don't change!)

EXAMPLE:
CAMD3 (protocol)  (this data is not real, you will need to replace these data to those which you see in the billing page)
cs357x://name:password@sharing.dyndns.org:10001?
where
sharing.dyndns.org - server host (instead of IP-address)
10001 - access port
name - login
password - password

If you have Dreambox and you are using NEWCAMD protocol with MGCAMD emulator (the best choice) or NEWCAMD, therefore you will need to enter the string received to newcamd.conf file which can be located (depending on the model of receiver) in one of the following directory: /usr/keys/newcamd.list. Open this file and edit the existing CWS string (they are placed almost at the end of the file), or add the string received to the existing CWS lines. Save the changes and restart receiver. If the receiver is connected to the internet, the connection is OK and you did everything correctly, after the restart of your receiver the picture of the package you've paid for should appear.
The following receivers- IPBox 200S, Relook 200S, Mutant 200S, Sezam 7700 has the same procedure with the only difference that the file to be adited has the name newcamd.list. It is located in /usr/keys/ directory.

If you CAMD3 protocol is used with CAMD3 emulator, you will need to enter the string received to the file camd3.servers which is located in /var/keys or /etc/keys/ directory. Open this file and enter the string received at the end of the file. Save the changes and restart receiver. If the receiver is connected to the internet, the connection is OK and you did everything correctly, after the restart of your receiver the picture of the package you've paid for should appear.

suma

  • Гость
Additional explanation (How to add the entry to receiver)
« Ответ #3 : 08 Декабря 2006, 11:26:07 »
To edit the above files you need a PC connected to your receiver by LAN cable directly or through a switch, and any of the file managers that support FTP protocol (Total Commander, FAR Manager etc.). If you do not have the file manager, you can download it from http://www.cardsharing.cc/index.php?topic=17.0

Suppose, you have all the things above. Open Total Commander. Choose NET > NEW FTP CONNECTION in the upper bar. In the opened window you need to enter the IP of your receiver (You have to know it! If no, check it in your receiver settings using remote control), uncheck ANONYMOUS CONNECTION and press OK. If your PC is connected to your receiver and you did everything correctly, the window USER NAME will appear. You need to enter “root”, press OK. Then the window PASSWORD will appear where you need to enter the password. The default password of the Dreambox is “dreambox” or it can be empty (no) password.  IPBox 200S, Relook 200S, Mutant 200S and Sezam 7700 receivers have default password “relook”. If you did everything correctly, a window with directories will appear at the right part of the Total Commander… you already know - what to do next.
You may configure in another way: just specify a string in the Explorer by changing IP address and password to the real one: ftp://root:dreambox@192.168.100.1/ But here a problem may arise! Linux does not like files edited in Windows. This may cause some problems. It is better that you do not use this option.

Don’t forget that to enter the Dreambox receiver from your PC, the Dreambox should have IP of the same sub-network as your PC has. It means that if the IP-address of your PC is, for example, 192.168.100.1, then the address of the Dreambox should also begin with 192.168.100.X, otherwise the connection will fail.
After you succeed, change the password in the Dreambox receiver. Don’t forget it! Recently, cases when Dreamboxes are scanned from outside have become quite often. So, if your Dreambox is not protected by a firewall and can be seen from outside (from the Internet), an attacker may hook your access string which you have paid for! As soon as the server detects an attempt to get access from more than one receiver, your login will be deactivated without money return. Remember, that your login is like a PIN-code to your credit card. Don’t dislose it to anyone, keep it safe, and everything will be OK!
To change the password you need to start a telnet session. If you have Windows OS, press START -> RUN -> write down TELNET 192.168.100.1 in the window and press OK (replace 192.168.100.1 with your receiver real address). Black window will open. Type user name “root” and press ENTER, Then type password “dreambox” or “relook” and press ENTER again (while entering the password you will see nothing on the screen, don’t worry). If you did everything correct, something like “root@dm7020:~#” should appear. It means that the connection is a  success. Now let’s change the password. Type “passwd”, press ENTER. Type new password and press ENTER again. Confirm your password, press ENTER. The result should be like  “password changed!” It means that you have succeeded in changing your password. You may close the window and go to your bed to sleep.
If you do not have a PC, but you have Dreambox and internet (which is strange!), you may type the string manually using your remote control. In this case your Dreambox should have TuxBox Commander in its additional settings. Open it (usually by yellow button + OK), and something like Norton Commander will appear. Enter the required directory using arrows of your remote control, point the cursor to the required file and press 4. The body of the file will open… Find CVS line and edit it using your remote control (as if you type an sms-message in your mobile phone). When the string on the screen completely coincides with the original string you received from us, press RED button (EXIT) and answer YES to the question “Save changes?” Restart your receiver. Enjoy watching!
REMEMBER: YOU MUST BE VERY CAREFUL WHILE TYPING THE SYMBOLS!  DON’T MISS A SINGLE ONE INCLUDING SPACES, UPPER AND LOW CASE LETTERS!