Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working  (Прочитано 1473 раз)

PetrN

  • Новичок
  • *
  • Сообщений: 8
Hello,
Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working. I did not make any changes on my receiver. There are no problems with UPC Direct HD.
Do not you have a problem?

my username: PetrN
package: VIP Czech
emulators: mgcamd

Thanks for the reply.
DM800HD, 1W, 13E, 19E, 23E, MgCamd 1.35

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 4673
  • DM 500HD OpenPli 4
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #1 : 16 Сентября 2017, 18:19:32 »
Hi,

We will check
ICQ:44244восемь
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

nopez

  • Пользователь
  • **
  • Сообщений: 17
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #2 : 16 Сентября 2017, 20:33:20 »
It's because Skylink is sequentially changing it's encryption, CW(0D96) to Irdeto(0624). Only few channels got this protection right now (CT1, CT2 like you said), but they're working on my end (with bigger latency ofcourse), no problems at all.

More info here:

https://www.parabola.cz/zpravicky/28346/skylink-provedl-zmeny-v-kodovani/
Dreambox DM525, Newnigma2 daily image, OSCam: 1.20 - r.11425, VIP Czech

PetrN

  • Новичок
  • *
  • Сообщений: 8
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #3 : 16 Сентября 2017, 21:48:59 »
Thank you for your effort.
DM800HD, 1W, 13E, 19E, 23E, MgCamd 1.35

PetrN

  • Новичок
  • *
  • Сообщений: 8
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #4 : 17 Сентября 2017, 10:55:08 »
It will freeze on my receiver and no income will be resumed.
Do not you have any recommendations on setting up mgcamd to recover?
DM800HD, 1W, 13E, 19E, 23E, MgCamd 1.35

andro35

  • Новичок
  • *
  • Сообщений: 1
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #5 : 17 Сентября 2017, 14:04:05 »
Poprosím vás o informáciu ohľadom vypínania  OD96  pre skylink,už nebude možné zdieľať skylink? Je tomu koniec?   Могу ли я запросить информацию об отключении OD96 для skylink, не сможет поделиться skylink? Это конец?

nopez

  • Пользователь
  • **
  • Сообщений: 17
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #6 : 17 Сентября 2017, 16:34:34 »
Prečo by to mal byť koniec keď som hore písal, že to funguje aj s 0624 Irdetom? Skús iný image/firmware alebo emulátor. // Why it should be the end of Skylink sharing if its working fine. Try different image, emulator...
Dreambox DM525, Newnigma2 daily image, OSCam: 1.20 - r.11425, VIP Czech

PetrN

  • Новичок
  • *
  • Сообщений: 8
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #7 : 02 Октября 2017, 17:28:58 »
Skylink still does not work properly. Will it be fixed?
DM800HD, 1W, 13E, 19E, 23E, MgCamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9165
  • Keep trying!
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #8 : 02 Октября 2017, 17:50:20 »
Skylink still does not work properly. Will it be fixed?

Nothing to fix. SkyLink is working.
Any log-file?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9165
  • Keep trying!
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #9 : 02 Октября 2017, 17:52:36 »
Nova Cinema HD

[mg0] <- CW from newcamd server_14:XXX12 (153ms)
[mg0] 153 msec -- Mon Oct  2 17:42:28 2017
===== Cryptoworks ECM on CaID 0x0D96, pid 0x1bb3 ======
prov: 000004
cw0:0 33 53 41 C7 C9 62 8D B8
cw1:0 09 13 2D 49 C8 62 38 62

If you have any problem, describe it in detail. Just to tell that package is not working is to tell nothing.
https://www.cardsharing.cc/index.php?topic=9566.0
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

PetrN

  • Новичок
  • *
  • Сообщений: 8
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #10 : 02 Октября 2017, 23:45:36 »
I wrote it already at the beginning of the topic. I will deliver the log later.

"Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working."
DM800HD, 1W, 13E, 19E, 23E, MgCamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9165
  • Keep trying!
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #11 : 03 Октября 2017, 06:31:49 »
I saw your title and we checked the channels you mentioned. Everything was working without problem.
"Some more" - is nothing, I told you. Specify particulat channels where do you have problem.
Please pay attention to the forum. Nobody else told about this issue, only you.
We may ask here the same question to other SkyLink subscribers - does anybody have any problem with channels, in particular - CT1 HD, CT2 HD and some more? and wait.
Meanwhile, check ping and route to the server when you have a problem. I think, you have to check internet connection when problem arises.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

nopez

  • Пользователь
  • **
  • Сообщений: 17
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #12 : 04 Октября 2017, 21:14:50 »
No problem here. Working fine with Irdeto - 0624 encryption.
Dreambox DM525, Newnigma2 daily image, OSCam: 1.20 - r.11425, VIP Czech

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Skylink CT1 HD, CT2 HD and some more after 20 seconds will stop working
« Ответ #13 : 27 Января 2018, 00:08:21 »
Hi,
Seznam.cz HD and Insight TV HD doesn't decode at all. C-Music & Stingray iConcerts HD stops after couple of seconds. All the rest of channels working ok. I am using mgcamd 1.45b, both ports.
Can anybody help? what part of log would you like to see so that I won't get another ban! or maybe configuration of mgcamd?
thanks for support.
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ