Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Freezes with dual login  (Прочитано 10176 раз)

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #20 : 06 Мая 2017, 18:53:02 »
Open Blue panel and select "CI-Softcam", then i choose Mgcamd 1.35a , press green button to "Start"
In past i maked the same proceed with CCcam 2.3.0 and run.
Dreambox 7080HD with Image GP3
MGcamd 1.38

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #21 : 06 Мая 2017, 18:55:24 »
I am asking you all these questions, because I think that you did not activate MgCamd emulator.
I don't know remote control buttons of your receiver, but from my DM800HDse, I know that to make emulator active, I need to press blue button of the remote to open emulator menu, and from EMU menu, select RUN emu. When you activate MgCamd, in EMU menu you will see the button Resrart (or Reboot) EMU and words "mgcamd-1.35a" near the command. It means that mgcamd is up and running.
Be sure that you use our mg_cfg file as well. Not ignore, priority, replace lists, but mg_cfg file (https://www.cardsharing.cc/index.php?topic=28088.0)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #22 : 06 Мая 2017, 19:22:39 »
From your statistics, I see that you are now connected. Check log-file. If emulator is up and running, you will see the log as well.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #23 : 06 Мая 2017, 19:30:39 »
Yes the proceed on my box is similiar as on yours.
When the Mgcamd is active i see the restart button.

I delete my mg_cfg and paste the mg_cfg from your link.
I change only L: and set permissions from 600 to 755.

I see now something on the log application, but only when i restart the box, and only if i restart with the app from computer (idreamX for Mac)

May 06 18:14:46 192.168.1.13 [mg0] stoping camd..
May 06 18:14:46 192.168.1.13 got 8 cmd 9F
May 06 18:14:50 192.168.1.13 [mgcamd] signal 15 received



Below the actual mg_cfg

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32   cccamd netclient, card list saved as /tmp/cccamd.info
#       (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 360 3600

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 } root password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 01 } 192.168.1.18 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 31 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }


Dreambox 7080HD with Image GP3
MGcamd 1.38

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #24 : 06 Мая 2017, 19:33:38 »
Now i see also this !?!

May 06 18:14:46 192.168.1.13 [mg0] stoping camd..
May 06 18:14:46 192.168.1.13 got 8 cmd 9F
May 06 18:14:50 192.168.1.13 [mgcamd] signal 15 received
May 06 18:20:05 192.168.1.13 [mg0] stoping camd..
May 06 18:20:05 192.168.1.13 got 8 cmd 9F
May 06 18:20:08 192.168.1.13 [mgcamd] signal 15 received
May 06 18:24:41 192.168.1.13 [mg0] stoping camd..
May 06 18:24:41 192.168.1.13 got 8 cmd 9F
May 06 18:24:45 192.168.1.13 [mgcamd] signal 15 received
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX91...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX92...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX93...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX94...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX95...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX96...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX97...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX98...
May 06 18:30:19 192.168.1.13 [newcamd] Ping to server_45:XXX99...
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:XXX92 (34ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:XXX93 (34ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20194 (35ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20191 (36ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20196 (38ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20195 (40ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20199 (41ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20197 (43ms)
May 06 18:30:19 192.168.1.13 [newcamd] Pong from server_45:20198 (44ms)
Dreambox 7080HD with Image GP3
MGcamd 1.38

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #25 : 06 Мая 2017, 19:40:51 »
In my config, I have:

AU
A: { 03 }

U: { 01 } without 0x12c0 (delete it)
N: { 07 } 0 0
Q: { 10 }
O: { 00 }
B: { 06 }
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #26 : 06 Мая 2017, 20:28:26 »
After this changes i see move something on log and the tv are bright for 3 seconds.
Then i have a green error screen from dreambox
After this the box are in a endless loop of reboot. Sometime i see tv for seconds.
Dreambox 7080HD with Image GP3
MGcamd 1.38

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #27 : 06 Мая 2017, 20:31:25 »
This are the log and repeat it after every reboot

May 06 19:29:44 192.168.1.13 got 562 cmd 9F
May 06 19:29:44 192.168.1.13 [mg0] namespace C00000 t-id 3F9 on-id 1
May 06 19:29:44 192.168.1.13 [mg0] descramble on 80, source 7
May 06 19:29:44 192.168.1.13 [mg0] service EF78 index 0 pmt pid 64 (8), pids: video 0x04FF, audio  0x0024 0x0503
May 06 19:29:44 192.168.1.13  CaPID: 0x1CE4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x19E4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1BE4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1AE4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1EE4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1DE4 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1DE5 ProvID: 000000
May 06 19:29:44 192.168.1.13  ECM to newcamd server_45:20197
May 06 19:29:44 192.168.1.13  Server: -- Sat May  6 19:29:43 2017
May 06 19:29:44 192.168.1.13 ----------------------------------------------------
May 06 19:29:44 192.168.1.13 000: 81 30 8f 07 8d ec 90 24 34 19 16 31 70 ab 65 02  .0.....$4..1p.e.
May 06 19:29:44 192.168.1.13 010: 34 17 57 ad 5d 09 56 9f 6b 09 42 00 af ab bf 99  4.W.].V.k.B.....
May 06 19:29:44 192.168.1.13 020: f5 16 88 61 8b 1d 27 29 c5 98 e0 26 af 5b 2b c7  ...a..')...&.[+.
May 06 19:29:44 192.168.1.13 030: ab 15 2d 5a 66 74 1e 7b 02 89 56 50 50 ca 93 7b  ..-Zft.{..VPP..{
May 06 19:29:44 192.168.1.13 040: 5a 8e e3 58 1c a1 58 34 73 e3 a1 17 01 bc c1 28  Z..X..X4s......(
May 06 19:29:44 192.168.1.13 050: 20 d1 b6 16 2b 55 3d 7f c4 32 8b 19 ba 12 a2 f3   ...+U=..2......
May 06 19:29:44 192.168.1.13 060: 06 5d 3c a0 77 31 53 ff 4f 13 09 cf ce e0 60 7a  .]<.w1S.O.....`z
May 06 19:29:44 192.168.1.13 070: 8e 00 ca 86 aa f4 00 c8 a1 be 11 14 03 a3 6d 0a  ..............m.
May 06 19:29:44 192.168.1.13 080: 39 7d a6 25 62 0d 5d db 2c 66 02 ef e2 17 e3 f5  9..%b.].,f......
May 06 19:29:44 192.168.1.13 090: 6a 15                                             j.
May 06 19:29:44 192.168.1.13 
May 06 19:29:44 192.168.1.13 Client <- Server: -- Sat May  6 19:29:43 2017
May 06 19:29:44 192.168.1.13 ----------------------------------------------------
May 06 19:29:44 192.168.1.13 000: 81 10 10 82 8e de ee e4 38 24 40 b6 9c 09 5b f5  ........8$@...[.
May 06 19:29:44 192.168.1.13 010: 34 9b c4                                          4..
May 06 19:29:44 192.168.1.13 
May 06 19:29:44 192.168.1.13 [mg0] <- CW from newcamd server_45:20197 (35ms)
May 06 19:29:44 192.168.1.13 [mg0] 35 msec -- Sat May  6 19:29:43 2017
May 06 19:29:44 192.168.1.13 ===== Nagra ECM on CaID 0x1830, pid 0x1ce4 ======
May 06 19:29:44 192.168.1.13 prov: 000000
May 06 19:29:44 192.168.1.13 cw0:0 82 8E DE EE E4 38 24 40
May 06 19:29:44 192.168.1.13 cw1:0 B6 9C 09 5B F5 34 9B C4
May 06 19:29:44 192.168.1.13 [mgcamd] emm started
May 06 19:29:44 192.168.1.13  CaPID: 0x1003 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1005 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1008 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1008 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1016 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1007 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1019 ProvID: 000000
May 06 19:29:44 192.168.1.13  CaPID: 0x1013 ProvID: 000000
May 06 19:29:44 192.168.1.13 [mgcamd] emm stopped
May 06 19:29:45 192.168.1.13 [mg0] stoping camd..
Dreambox 7080HD with Image GP3
MGcamd 1.38

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #28 : 06 Мая 2017, 21:32:38 »
Attached the green screen
Dreambox 7080HD with Image GP3
MGcamd 1.38

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #29 : 07 Мая 2017, 06:17:13 »
Green screen (or Screen of death) may mean anything possible starting from incompatibility of image and plug-ins installed, wrong settings of Dreambox network card, png file (picture) of the home screen, etc.
Advice: factory reset and try everything again OR re-install image (firmware), set up network, install mgcamd and try again.
Or: try other image with mgcamd.
Or: find any Dreambox 7080HD specific forum and look for recommendations of proper settings.
If you want your receiver to work perfectly (and this is particularly perfect receiver), you need to set it up properly. We just give general recommendations and settings to our users how to. But, specifically re: your model of receiver, you will need a technical support of this model. Use Google and you will find any helpful material.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #30 : 07 Мая 2017, 11:48:16 »
Good Morning Suma  :)

I take a look in some forums and read of many problems with mgcamd.
Also the people text that mgcamd is very old and can`t perform at the level of this fast box.

But some users can run mgcamd 1.38.
I uninstall mgcamd 1.35a and install the newest avaiable version, 1.38.
This version run fine on my box with the setting of mg_cfg you give me yesterday.

You think it`s ok to use 1.38?
It is compatible for requests to your server?
Dreambox 7080HD with Image GP3
MGcamd 1.38

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #31 : 07 Мая 2017, 16:01:30 »
Hi,
I am glad to hear that. OK, use mgcamd 1.38, but look frequently to your statistics in the billing.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Miguel

  • Пользователь
  • **
  • Сообщений: 18
Re: Freezes with dual login
« Ответ #32 : 07 Мая 2017, 22:02:53 »
Hi again,

this afternoon the dual login run fine.
But this evening the freeze problem are present as same with cccam 2.3.0

I have this problem from begin i use your service (early 2015)
It's present only in evening when many people looks tv.

What can i do to fix this problem?
Dreambox 7080HD with Image GP3
MGcamd 1.38

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Freezes with dual login
« Ответ #33 : 08 Мая 2017, 05:54:48 »
1. We need log-file during freezes (copy 5-7 minutes log and create txt file).
2. Send this txt file with log to Moderator with detailed explanation of the issue. Moderator will analyze your log and give you advice.
3. Moderator e-mail is moderator at cardsharing.cc (PM are disabled on the forum)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic