Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing  (Прочитано 4868 раз)

navmanl200

  • Новичок
  • *
  • Сообщений: 2
Is anyone else having a problem with channels 'freezing' for an extended period of time today ?? On the SKY UK Package
 
I usually only get 1 or 2 'freezes' a week and they are usually about 5-10 seconds long, these are happening about every few minutes and can be upwards of 30 seconds long  :'( :'(
Only started happening today, checked all the usual suspects, I have checked all my CCcam settings in the box (VUSOLO+2) checked and factory reset my router and modem, (stable connection coming in and achieving 50mbps download, so not that, nice steady cabled connection to VUSOLO, direct from my router, free to air channels are AOK NO FREEZING so what gives fellas ??

Any help would be appreciated, if it's a glitch I can live with that. ;)
VU+ Solo2, VIX Build 018 (Hades) MGcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

navmanl200

  • Новичок
  • *
  • Сообщений: 2
Re: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing
« Ответ #2 : 26 Декабря 2015, 12:51:14 »
Thanks Suma......

Apologies, it's my first post on the forum, and like most people didn't read the forum post rules, so for that I apologize.

Equipment :- VU Solo+2
Protocol :- [Newcamd525] [Cccam]
Server :- server_258
Subscription type :- VIP 12 Months, expires 11.03.2016
Emulator:-  Cccam 2.3.0

Part of log file from yesterday, below, complete logfile is about 1000 lines long from yesterday, but basically a repeat of what you see below.

NO Settings have been changed on my VU Solo+2, this only started yesterday, with NO INTERVENTION from a human at my end.

The only thing that has changed (After) I started having problems, was a factory reset of my Netgear WNDR4500 router, hence the IP address change from .18 to .5

My VU Solo+2 has a physical connection to my router via a set of netgear powerplugs, that have worked fine from day 1, they were also RESET and reconnected

I Hope this is what will help you help me, many thanks.


Dec 25 19:01:18 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 19:01:18 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xcb7efb00
Dec 25 19:01:18 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 19:01:18 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0
Dec 25 19:01:29 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 19:01:29 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 19:01:29 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 19:01:29 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 25 19:01:29 vusolo2 user.warn kernel: FE tune
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6809904
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xcb7bb300
Dec 25 19:01:30 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 19:01:30 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0
Dec 25 19:04:57 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 19:04:57 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 19:04:57 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 19:04:57 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 25 19:04:57 vusolo2 user.warn kernel: FE tune
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6809904
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xcb766d00
Dec 25 19:04:58 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 19:04:58 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 0 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 25 19:15:55 vusolo2 user.warn kernel: FE tune
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6809904
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xc8e25c80
Dec 25 19:15:55 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 19:15:55 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 0 0
Dec 25 19:26:40 vusolo2 user.warn kernel: FE tune
Dec 25 19:30:06 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 19:49:02 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 19:54:07 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 19:56:41 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 19:59:15 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 20:03:05 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 20:05:39 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 20:24:35 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 20:40:55 vusolo2 daemon.info avahi-daemon[578]: Withdrawing address record for 192.168.1.18 on eth0.
Dec 25 20:40:55 vusolo2 daemon.info avahi-daemon[578]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.18.
Dec 25 20:40:55 vusolo2 daemon.info avahi-daemon[578]: Interface eth0.IPv4 no longer relevant for mDNS.
Dec 25 20:40:59 vusolo2 daemon.info avahi-daemon[578]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.5.
Dec 25 20:40:59 vusolo2 daemon.info avahi-daemon[578]: New relevant interface eth0.IPv4 for mDNS.
Dec 25 20:40:59 vusolo2 daemon.info avahi-daemon[578]: Registering new address record for 192.168.1.5 on eth0.IPv4.
Dec 25 20:41:13 vusolo2 daemon.crit automount[549]: key "logs" not found in map source(s).
Dec 25 20:42:10 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 25 20:56:40 vusolo2 user.warn kernel: FE tune
Dec 25 21:30:08 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 21:30:08 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 21:30:08 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 21:30:08 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 25 21:30:08 vusolo2 user.warn kernel: FE tune
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6809904
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xc8c74300
Dec 25 21:30:09 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 21:30:09 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 25 22:56:40 vusolo2 user.warn kernel: FE tune
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_SELECT_SOURCE 0
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_SET_BYPASS_MODE 1
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: downmix 0 state : 0
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_PAUSE 6809904
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_PLAY 6809904 decoder start : 0
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0  0
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_FREEZE 6809904  0
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_PLAY 6809904  2 2
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_SLOWMOTION 0    1
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_FAST_FORWARD 0    1
Dec 25 22:56:40 vusolo2 user.warn kernel: [VID]: VIDEO_CONTINUE 6809904  1
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 1 aph=0xc8c07480
Dec 25 22:56:40 vusolo2 user.warn kernel: [AUD]: Mute : 0
Dec 25 22:56:41 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
Dec 25 22:56:41 vusolo2 user.warn kernel: [VID]: VIDEO_GET_SIZE aspect: 1 0
Dec 25 22:58:11 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1  1
Dec 25 22:58:11 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6809904
Dec 25 22:58:11 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6809904 0 aph=0x0
Dec 25 22:58:11 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Dec 26 00:57:31 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:31 vusolo2 user.warn kernel: Hotplug - status.connected 0:1:0
Dec 26 00:57:31 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:31 vusolo2 user.warn kernel: Hotplug - status.connected 1:0:2
Dec 26 00:57:33 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:33 vusolo2 user.warn kernel: Hotplug - status.connected 0:1:0
Dec 26 00:57:34 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:34 vusolo2 user.warn kernel: Hotplug - status.connected 1:0:2
Dec 26 00:57:36 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:36 vusolo2 user.warn kernel: Hotplug - status.connected 0:1:0
Dec 26 00:57:37 vusolo2 user.warn kernel: bcm7356: hotplug_callback():
Dec 26 00:57:37 vusolo2 user.warn kernel: Hotplug - status.connected 1:0:2
Dec 26 01:00:02 vusolo2 user.warn kernel: FE tune
Dec 26 04:00:02 vusolo2 user.warn kernel: FE tune
Dec 26 04:05:11 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 04:25:16 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 05:36:42 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:39:26 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:40:45 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:44:39 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:45:59 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:49:53 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:51:08 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:53:43 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 07:56:18 vusolo2 daemon.debug CCcam: keepalive failed, close connection to server_258
Dec 26 08:41:10 vusolo2 daemon.crit automount[549]: key "logs" not found in map source(s).
VU+ Solo2, VIX Build 018 (Hades) MGcamd 1.35

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing
« Ответ #3 : 26 Декабря 2015, 14:12:00 »
Hi,
1. Thank you for description provided. It is better to complete your signature for admins not to ask you each time - what and where
https://www.cardsharing.cc/index.php?topic=24581.0
2. What is shown is actually not a log-file. Look how log-file shall look like https://www.cardsharing.cc/index.php?topic=32632.0
3. To make log-file, you need 3CSyslog software https://www.cardsharing.cc/index.php?topic=26069.0
4. Always use our default configs for mgcamd emulator https://www.cardsharing.cc/index.php?topic=28612.0
5. Emulator recommended is mgcamd 1.35. Through your add ons or plugins menu, look for emulators and install mgcamd 1.35.
6. The best performance is achieved if you use Cccam protocol via MgCamd emulator https://www.cardsharing.cc/index.php?topic=33652.0
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

mskhan76

  • Новичок
  • *
  • Сообщений: 4
Re: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing
« Ответ #4 : 06 Января 2016, 00:03:52 »
Hi,

All the channels (freeview and paid) are gone from last two days. the time on device is also not correct. internet connection is fine.

 I am using OPENBOX V8S, CCcam.cfg. I'm using SKY UK+view asia+zeetv. I don't know what is log file. Kindy assist.

is there any problem with sky uk 28?

 Regards.

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing
« Ответ #5 : 06 Января 2016, 08:58:25 »
SKY UK work!

    [mg0] -> ECM to cccamd server_45:xxxxx (00000067)
    [mg0] <- CW from cccamd server_45:xxxxx (313ms)
    [mg0] 313 msec -- Wed Jan  6 07:57:21 2016
    system: NDS
caid: 0x0963
pid: 0x0502
    prov: 000000
    cw0:0 6F FC 44 AF D1 14 74 59
    cw1:0 21 F6 52 69 62 42 D8 7C
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

FlashG

  • Новичок
  • *
  • Сообщений: 9
Re: Sky UK + ViewAsia + ZeeTV + BT Sport + Irish + MUTV + Chelsea TV 28E Freezing
« Ответ #6 : 13 Января 2016, 00:58:56 »
Hi,

Just wondering if anyone else is still having this problem? My Sky UK + ViewAsia + ZeeTV + BT Sport + Irish package has worked flawlessly for the past 6 months but has recently started freezing constantly, all day long. No one particular channel, and freezes randomly anywhere between every 1 or 2 minutes to sometimes works for 10 to 15 minutes without a freeze. On 50+Mb broadband, using oscam, nothing in my setup has changed since the initial install, but this freezing isn't bearable anymore.

Can anyone shed any light on the cause from cardsharingserver?

My server BTW is server_74

Tks, J

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic