Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Problems with Config - Violation of rule No.6  (Прочитано 20209 раз)

tronic1704

  • Новичок
  • *
  • Сообщений: 3
Problems with Config - Violation of rule No.6
« : 18 Февраля 2016, 12:28:56 »
Hello, i have some Problems with Oscam.
Today i have install the Oscam and i have configured the configs correctly.

So i have set the au = 0 in the [dvbapi]-section.

Nevertheless, a EMM request is still sent.

Therefore, I have a Violation of rule No.6 problem.

I ask times to check my configs if there's something wrong.

Installed Oscam is "modern emu svn 1256-r2"

Thanks

Log:
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Thu Feb 18 09:53:26 2016
-------------------------------------------------------------------------------
2016/02/18 09:53:26        0 s >> OSCam <<  cardserver started, version 1.20-modern_svn, build r1256 (mipsel-oe-linux)
2016/02/18 09:53:26        0 s creating pidfile /tmp/.oscam/oscam.pid with pid 15640
2016/02/18 09:53:26        0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2016/02/18 09:53:26        0 s [Emu] OSEmu (built-in) version 708
2016/02/18 09:53:26        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/02/18 09:53:26        0 s signal handling initialized
2016/02/18 09:53:26        0 s 264 service-id's loaded in 6 ms
2016/02/18 09:53:26        0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/02/18 09:53:26        0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/02/18 09:53:26        0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/02/18 09:53:26        0 s Binary without Griffin module - no EMM processing for Griffin possible!
2016/02/18 09:53:26        0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/02/18 09:53:26        0 s "main_cardsharing.cc_20201" [cccam] creating thread for device srv***.net
2016/02/18 09:53:26        0 s "backup_cardsharing.cc_20201" [cccam] creating thread for device server****.biz
2016/02/18 09:53:26        0 s emulator [emu] creating thread for device emulator
2016/02/18 09:53:26        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/02/18 09:53:26        0 s waiting for local card init
2016/02/18 09:53:26   882348 r key file not found in: /etc/tuxbox/config
2016/02/18 09:53:26   882348 r reading key file: /var/keys/SoftCam.Key
2016/02/18 09:53:26   8725B0 h webif: decompressed 177630 bytes back into 411552 bytes
2016/02/18 09:53:26   8725B0 h HTTP Server running. ip=0.0.0.0 port=****
2016/02/18 09:53:26   87E9A8 p srv***.net: resolved ip=**********
2016/02/18 09:53:26   87E9A8 p "main_cardsharing.cc_20201" [cccam] connecting to srv***.net:20201
2016/02/18 09:53:26   882348 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2016/02/18 09:53:26   87E9A8 p "main_cardsharing.cc_20201" [cccam] proxy initialized, server srv***.net:20201
2016/02/18 09:53:26   880678 p server****.biz: resolved ip=********
2016/02/18 09:53:26   880678 p "backup_cardsharing.cc_20201" [cccam] connecting to server****.biz:20201
2016/02/18 09:53:26   880678 p "backup_cardsharing.cc_20201" [cccam] proxy initialized, server server****.biz:20201
2016/02/18 09:53:27   882348 r emulator [emu] card detected
2016/02/18 09:53:28   882348 r emulator [emu] found card system emu
2016/02/18 09:53:28   882348 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2016/02/18 09:53:28   882348 r key file not found in: /etc/tuxbox/config
2016/02/18 09:53:28   882348 r reading key file: /var/keys/SoftCam.Key
2016/02/18 09:53:28        0 s init for all local cards done
2016/02/18 09:53:28   8B3520 c plain dvbapi-client granted (DVBApi, au=off)
2016/02/18 09:53:28   8B3520 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2016/02/18 09:53:28   8B3520 c Found 0 ECMpids and 9 STREAMpids in PMT
2016/02/18 09:53:28   8B3520 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
2016/02/18 09:53:28   8B3520 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2016/02/18 09:53:59   87E9A8 p "main_cardsharing.cc_20201" [cccam] disconnected: reason inactivity
2016/02/18 09:53:59   880678 p "backup_cardsharing.cc_20201" [cccam] disconnected: reason inactivity


oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1256
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /tmp/oscam.log
# nice                          = -1
maxlogsize                    = 500
# ecmfmt                        = c&0p/i/d/s/l:h.e_w

[cache]
max_time                      = 18
csp_allow_request             = 0

[dvbapi]
enabled                       = 1
pmt_mode                      = 0
user                          = DVBApi
boxtype                       = dreambox
au                            = 0

[webif]
httpport                      = 8800
httpuser                      = root
httppwd                       = **********
httphelplang                  = de
httprefresh                   = 6
httppollrefresh               = 10
httpshowmeminfo               = 1
httpshowuserinfo              = 1
httpshowloadinfo              = 1
httpallowed                   = 127.0.0.1,192.168.120.1-192.168.120.253
httposcamlabel                = ******-OScam


oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-modern_svn SVN r1256
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label                         = "main_cardsharing.cc_20201"
protocol                      = cccam
device                        = server_312,20201
user                          = *******
password                      = *******
group                         = 1
cccversion                    = 2.3.0
audisabled                    = 1

[reader]
label                         = "backup_cardsharing.cc_20201"
protocol                      = cccam
device                        = server_39,20201
user                          = *******
password                      = *******
group                         = 1
cccversion                    = 2.3.0
audisabled                    = 1
fallback                      = 1


oscam.user
[account]
user                          = DVBApi
keepalive                     = 0
au                            = 0
group                         = 1

Dream 800 HDseV2 & DM900UHD - armv71, 0.8W, 4E, 5E, 7E, 13E, 19.2E, 23.5E, 28.5E, Vip All, Newnigma 4.3.2r7-17, OSCam-1543-11577-r-798 - arm-oe-linux-gnueabi. Inet: fiber optic network 1Gb/s (FTTB)

centreapo

  • Новичок
  • *
  • Сообщений: 2
Re: Problems with Config - Violation of rule No.6
« Ответ #1 : 19 Апреля 2016, 00:46:15 »
Same problem with Oscam.

Any suggestions??

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Config - Violation of rule No.6
« Ответ #2 : 19 Апреля 2016, 04:35:47 »
If you don't know how to configure Oscam properly, use Mgcamd. We recommend using this emulator and guarantee a stable CS only with this emu.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

centreapo

  • Новичок
  • *
  • Сообщений: 2
Re: Problems with Config - Violation of rule No.6
« Ответ #3 : 20 Апреля 2016, 00:58:51 »
Thanks for reply.

 I have configured oscam/cccam using the oscam.server file settings on the site, with "audisabled  = 1". I have also set "au = 0" in oscam.user and "au = 0" in oscam.conf, but the problem still appears.
 
Any other suggestions?

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Problems with Config - Violation of rule No.6
« Ответ #4 : 20 Апреля 2016, 09:13:48 »
is rule violation No.6 only related to sending EMMs ? (I am not sure, what does the mail say about violation ?)
at least the settings seems correct and the logfile also only shows that AU/EMM is disabled for user dvbapi
but the logfile does not show anything about EMMs, it does not show anything about decoding at all *g*

if you see EMMs in the log or statistic, I would suggest to use other (older) Oscam-version as it might be a bug, or try to switch to Newcamd protocol (I use an older Oscam version and Newcamd protocol, no problem with sending EMMs)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

fairsats

  • Mr
  • Старожил
  • ****
  • Сообщений: 121
Re: Problems with Config - Violation of rule No.6
« Ответ #5 : 21 Апреля 2016, 13:17:06 »
This is my setup....no problems....

[reader]
label                         = server

protocol                      = cccam

device                        = server,port

user                          = *********

password                      = ********

inactivitytimeout             = 30

group                         = 1

blockemm-unknown              = 1

blockemm-u                    = 1

blockemm-s                    = 1

cccversion                    = 2.1.2

ccckeepalive                  = 1


[reader]
label                         = server

protocol                      = cccam

device                        = server,port

user                          = ********

password                      = *******

inactivitytimeout             = 30

group                         = 1

blockemm-unknown              = 1

blockemm-u                    = 1

blockemm-s                    = 1

cccversion                    = 2.1.2

ccckeepalive                  = 1

VU+SOLO 4K
OpenAtv 5.3
CCCAM converted to Oscam
VIP FULL

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #6 : 27 Мая 2016, 16:13:45 »
Same here, violating rule 6 with oscam:

Oscam.server:

[reader]
label                         = main
protocol                      = cccam
device                        = host,port
user                          = xxx
password                      = xxx
inactivitytimeout             = 30
group                         = 7
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
lb_weight                     = 150
cccversion                    = 2.3.0
audisabled                    = 1

[reader]
label                         = backup
protocol                      = cccam
device                        = host,port
user                          = xxx
password                      = xxx
inactivitytimeout             = 30
fallback                      = 1
group                         = 7
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
lb_weight                     = 150
cccversion                    = 2.3.0
audisabled                    = 1

As you see, i block all emm's...

Oscam version: 11233
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #7 : 27 Мая 2016, 16:17:59 »
Цитировать
[dvbapi] subsection, parameter au = 0
ist not possible for me, because i need au for my local cards.
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Config - Violation of rule No.6
« Ответ #8 : 27 Мая 2016, 18:03:03 »
You have a choice - either cards or CS
Both are hardly possible
Or consult the users who knows what and how to combine both options
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #9 : 28 Мая 2016, 21:46:15 »
Hi suma,

thanks for your reply.

Why does Oscam sends EMM Requests with my settings? It's a bug in Oscam?

I switch to CCcam now and try again...
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #10 : 28 Мая 2016, 22:28:03 »
Sorry, me again,

CCcam doesn't work in my setup. Could you please give me some hints (via PM if possible) how to consult the users you mentioned? I just want to use your nice service (without sending EMM Requests to you :-)) and would like to stick to oscam. I can't use two DVBAPI sockets at one time.
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Config - Violation of rule No.6
« Ответ #11 : 29 Мая 2016, 06:58:53 »
Did you read previous replies of fairsats and Jogi?
PM are disabled, you may just quote them, they will understand that you address personally them.

VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Problems with Config - Violation of rule No.6
« Ответ #12 : 29 Мая 2016, 09:34:12 »
CCcam doesn't work in my setup.
that's an helpful answer - what do you expect from this description ?
from the small logfile of the 1st post (as already mentioned not related to your problem, you cut the logfile before it got interesting)  it seems you are successful connected to CCcam server.

Of course you can only use ONE DVBAPI-client on your receiver, you would also fail to run a Newcamd-client simultaneously to a CCcam-client. Common mistake for Newbees to install another client in addition if the 1st one fails and (depending on what is available for your receiver) another one and another one and perhaps the same one again - and wondering why none of them works :) technically you might run Oscam as a card/proxy-reader only without using DVBAPI-mode and run ONE Newcamd OR CCcam client in addition. But if DVBAPI is available for your receiver I cannot see any good reason to do so (even if technically possible).
Because uninstalling of emulators often leave some parts that conflicts with the emulator you want to use it might be the best to reinstall the whole receiver and simply install only one emulator (Oscam is a good choice, especially if you have a local card in your receiver, otherwise Mgcamd or CCcam works the same way, is easier to configure has the same performance... so perhaps the better choice if you are not familiar in congratulating emulators *g*)

I ask you to show the whole warning message you receive about the rule violation as many errors are not only related to one problem/sending EMMs. As your configuration seems to be correct there might be another reason why you receive the warning mail. I am not going to search the forum for what violation No.6 stands for (but I am sure its listed somewhere).

All Oscam clients I know respect EMM configuration on reader and/or user level, including DVBAPI mode configuration. My Oscam works fine with a local card and EMMs enabled while connected to the cs-server without sending EMMs as configured for the proxy-reader. I am aware that there have been some EMM problems of Oscam in combination with CCcam protocol -but by my knowledge that was more related to sending none or broken EMMs. As this problem never concerns me I do not know if this is really fixed (basically I think so at least for some Oscam versions/not necessarily for the version your receiver requires).
However: I already suggested to switch to Newcamd protocol, the server support both and Oscam either. I am using Newcamd protocol because I simply like it more (personal opinion only) even if it requires a little bid more work for configuration but believe me if CCcam would have any advantage on the server I would use it *g*
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #13 : 29 Мая 2016, 12:20:32 »
Did you read previous replies of fairsats and Jogi?
PM are disabled, you may just quote them, they will understand that you address personally them.



All right - yes i did read the previous posts. But i thought, if i use 50 newcamd readers then there are too much connections to the server.

technically you might run Oscam as a card/proxy-reader only without using DVBAPI-mode and run ONE Newcamd OR CCcam client in addition. But if DVBAPI is available for your receiver I cannot see any good reason to do so (even if technically possible).
Because uninstalling of emulators often leave some parts that conflicts with the emulator you want to use it might be the best to reinstall the whole receiver and simply install only one emulator (Oscam is a good choice, especially if you have a local card in your receiver, otherwise Mgcamd or CCcam works the same way, is easier to configure has the same performance... so perhaps the better choice if you are not familiar in congratulating emulators *g*)

Believe me, I'm using Oscam since 3-4 years :-)

I ask you to show the whole warning message you receive about the rule violation as many errors are not only related to one problem/sending EMMs. As your configuration seems to be correct there might be another reason why you receive the warning mail. I am not going to search the forum for what violation No.6 stands for (but I am sure its listed somewhere).

I disabled the reader yesterday to avoid punishment - no error message any more.


All Oscam clients I know respect EMM configuration on reader and/or user level, including DVBAPI mode configuration. My Oscam works fine with a local card and EMMs enabled while connected to the cs-server without sending EMMs as configured for the proxy-reader. I am aware that there have been some EMM problems of Oscam in combination with CCcam protocol -but by my knowledge that was more related to sending none or broken EMMs. As this problem never concerns me I do not know if this is really fixed (basically I think so at least for some Oscam versions/not necessarily for the version your receiver requires).
However: I already suggested to switch to Newcamd protocol, the server support both and Oscam either. I am using Newcamd protocol because I simply like it more (personal opinion only) even if it requires a little bid more work for configuration but believe me if CCcam would have any advantage on the server I would use it *g*

Okay, I will give it a try, thank you.
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Problems with Config - Violation of rule No.6
« Ответ #14 : 29 Мая 2016, 12:54:04 »
All right - yes i did read the previous posts. But i thought, if i use 50 newcamd readers then there are too much connections to the server.
yes there is a limit - not by server but by Oscam I believe. Do you really need all of the readers ? I have VIP All Ultra as well and connect to 12 servers because I do not even receive all the satellite you have lines available (and because I have dual login backup is not available for me. Backup servers are not really required, perhaps limit it to your most important packages *g*).
But you can simply try and see what happens. If there is a limit you should expect it around 30 servers.
Цитировать
Believe me, I'm using Oscam since 3-4 years :-)
no doubts, I have friends using it for twice the time - but if there is the sightliest change my phone rings :)
But I might have misjudged you. I simply see what you are asking and what you are providing on information to make up my mind, so my mistake.
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

75spam

  • Пользователь
  • **
  • Сообщений: 48
Re: Problems with Config - Violation of rule No.6
« Ответ #15 : 30 Мая 2016, 21:34:35 »
I see it's Oscam emulator with Cccam protocol.

Recently I bought a new VU+ box that forced me to try Oscam (Mgcamd not working when box 1st released).
It works fine on Newcamd but on Cccam it also give the EMM error.

From goggling I see there is an issue with some versions of Oscam and Ccam.
There is a german site (easily found on google) that has a version of Oscam with 'cccam EMM fix'.

However, do yourself a favour and do either of these options:

Oscam emulator with Newcamd protocol.
MgCamd emulator with Ccam/Newcamd protocol.

let us know how you get on :)
VU+ Solo 4K
MgCamd 1.35a / Oscam(maybe)

heinz

  • Новичок
  • *
  • Сообщений: 6
Re: Problems with Config - Violation of rule No.6
« Ответ #16 : 30 Мая 2016, 21:37:10 »
I see it's Oscam emulator with Cccam protocol.

Recently I bought a new VU+ box that forced me to try Oscam (Mgcamd not working when box 1st released).
It works fine on Newcamd but on Cccam it also give the EMM error.

From goggling I see there is an issue with some versions of Oscam and Ccam.
There is a german site (easily found on google) that has a version of Oscam with 'cccam EMM fix'.

However, do yourself a favour and do either of these options:

Oscam emulator with Newcamd protocol.
MgCamd emulator with Ccam/Newcamd protocol.

let us know how you get on :)

Thanks for your Input, " Oscam emulator with Newcamd protocol" works (not very stable) for me
Oscam with local cards, TVHeadend via DVBAPI
VIP All ULTRA

75spam

  • Пользователь
  • **
  • Сообщений: 48
Re: Problems with Config - Violation of rule No.6
« Ответ #17 : 30 Мая 2016, 21:43:00 »
When you say not very stable..what is the issue?

Are you accessing different server ports when switching channels?

I had this in the Sky UK pack...two CAIDs. sometimes I had to restart CAM if channels were going to the other CAID/port.

eg.
sky movies = CAID 963 port 42
RTE one = CAID 960 port 39

In DVBAPI setting, change CAID access to 'change CAID one after the other'

'access both CAIDs simultaneously' caused issues.
VU+ Solo 4K
MgCamd 1.35a / Oscam(maybe)

Franzfranz

  • Пользователь
  • **
  • Сообщений: 23
Re: Problems with Config - Violation of rule No.6
« Ответ #18 : 12 Августа 2016, 12:19:55 »
How to set the KeepAlive Request to 300 sec in OSCam? I don't wanna break rules, thank you.
Wetek Play, LE 7.0.2, TVHeadend 4.2.x, Cccam 2.1.1-2971 (oscam) & dvbapi, VIP All Dual Login, Astra 19.2 & Hotbird 13

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Problems with Config - Violation of rule No.6
« Ответ #19 : 12 Августа 2016, 12:29:24 »
KeepAlive Requests are adjusted in MgCamd (newcamd.list file)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic