Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Cyfra+ / Platforma N Problem  (Прочитано 4340 раз)

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Cyfra+ / Platforma N Problem
« : 17 Октября 2013, 23:48:13 »
Since nearly two weeks I've got some problems on Cyfra+ / Platforma N channels.

All channels that belong to Cyfra+/N are randomly freezing for 5-10 sec.

I've got VIP Poland package and when I'm connected to Cyfrowy Polsat only everything is fine but as soon as I connect to Cyfra or N problems is back and all channels that belong to Cyfra/N are randomly freezing again. (i.e. TVN is fine when I'm just connected to Cyfrowy Polsat but once I connect to Cyfra/N channel starts freezing again)

Channels that are exclusive to Cyfrowy Polsat (like Polsat Sport, Polsat Cafe, Polsat Film etc) are working fine all the time so it's definitely not a problem on my end.

Can you please advice?

VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #1 : 18 Октября 2013, 05:24:27 »
Can you please advice?

Hi,
I will be able to advice you when you complete your signature (describe your receiver, emulator) and provide log-file of the channel(s) that is (are) freezing for you.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Re: Cyfra+ / Platforma N Problem
« Ответ #2 : 18 Октября 2013, 22:20:35 »
I've added a signature as per your request.

When it goes about channels that are freezing the list would be pretty long as it's all channels that are exclusive to Cyfra+ & N (nc+) such as Canal+ HD, Canal+ Sport HD, nsport HD,  Minimini+ HD etc.

Channels like TVN, TVP HD, TVP1 & TVP2 etc. are fine when I'm only connected to Cyfrowy Polsat but when I connect to Cyfra+ and/or N they also start freezing.

I've checked all my network settings, tried different router but that not solved the problem.

Any help would be really appreciated !
VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Re: Cyfra+ / Platforma N Problem
« Ответ #3 : 21 Октября 2013, 21:33:52 »
Can you please advice?

Hi,
I will be able to advice you when you complete your signature (describe your receiver, emulator) and provide log-file of the channel(s) that is (are) freezing for you.

regards

Can you please have a look into my problem? It's not watchable when it's freezing so often.

Thanks
VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #4 : 22 Октября 2013, 07:02:45 »
Hi,
First of all, your receiver (Ferguson Ariva) is blacklisted and is not allowed on our server
http://www.cardsharing.cc/index.php?board=54.0
Please read all the posts starting from the beginning and you will understand that you have wrong receiver for our server.

regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Re: Cyfra+ / Platforma N Problem
« Ответ #5 : 24 Октября 2013, 22:40:56 »
Hi,

Thanks for your reply.

Are all Ferguson Ariva receivers blacklisted or is it just Ariva 200?

My 202E is totally different then Ariva 200 and I've been using it for over a year without any problems (up to now).

I know few other people that are also using Ferguson receivers with your server without any issues and I've noticed that your post about Ariva being blacklisted is from 2011 and since then there was over 20 firmware updates for all Ferguson devices.

Do you think that if I will change receiver to i.e. Dreambox that will solve my problem?

Many Thanks
VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #6 : 25 Октября 2013, 05:13:45 »
Do you think that if I will change receiver to i.e. Dreambox that will solve my problem?

1000% sure
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #7 : 25 Октября 2013, 05:16:42 »
from 2011 and since then there was over 20 firmware updates for all Ferguson devices.

You can judge by yourself. More than 20 firmware updates! It tells us that it is not stable and not reliable (relative to our server)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Re: Cyfra+ / Platforma N Problem
« Ответ #8 : 25 Октября 2013, 10:47:58 »
Do you think that if I will change receiver to i.e. Dreambox that will solve my problem?

1000% sure

What receiver would you recommend? (not too expensive :P)

When in goes about Ferguson firmware updates, I've noticed that new firmware has been released this week...I will give it a go but if that won't solve the problem I will invest in new receiver.
VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hiobb

  • Гость
Re: Cyfra+ / Platforma N Problem
« Ответ #10 : 27 Октября 2013, 00:18:18 »
Hello,

I'm having the same problem as the previous person, on the Cyfra+ HD 13E packet, for about a month the channels keep freezing sometimes every 5 minutes, sometimes every 30 seconds, depending on the day, I believe it is happening on all channels.

The receiver I'm using is Openbox/Skybox S9 HD and I have it set up according to the settings provided on your forum using the mgcamd plugin:
http://www.cardsharing.cc/index.php?PHPSESSID=9mhk8osqvtqvmp525b13pnppj0&topic=27816.0

Is there anything that you can do to get this fixed?

Regards

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #11 : 27 Октября 2013, 08:46:59 »
As I have already explained, C+ cards are overloaded because provider killed the most of our cards. In the future, seca encryption will not be used any more, only nagra and conax. Don't try to watch Polsat or N channels witn C+ encryption, you will always have freezes. We cannot fix this, as the seca encryption is living last days.
We are waiting for new C+ cards, this was told before.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Tunia2

  • Пользователь
  • **
  • Сообщений: 18
Re: Cyfra+ / Platforma N Problem
« Ответ #12 : 27 Октября 2013, 12:09:20 »
As I have already explained, C+ cards are overloaded because provider killed the most of our cards. In the future, seca encryption will not be used any more, only nagra and conax. Don't try to watch Polsat or N channels witn C+ encryption, you will always have freezes. We cannot fix this, as the seca encryption is living last days.
We are waiting for new C+ cards, this was told before.

Are you aware that C+ and N are now one TV provider called NC+? (since about 5 months). I have now disconnected by receiver from C+ port and everthing seems to be working fine (I'm connected to Cyfrowy Polsat and N and I've got access to all channels)

I also read on some Polish forums that NC+ is going to kill Seca very soon and they will be using Conax only (new cards will only work with NC+ receivers, they will be blocked to work with any third party receivers)

Thanks
VU+ Solo 4K, VIP Poland, VTi Image, MgCamd 1.35

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 9165
  • Keep trying!
Re: Cyfra+ / Platforma N Problem
« Ответ #13 : 27 Октября 2013, 12:24:00 »
That's what i told about in the thread Re: Cyfra+
http://www.cardsharing.cc/index.php?topic=31404.40
For me, if not using C+ ports, everything works FINE without any freezes and stops
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic