Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Flame => Тема начата: olicomp от 18 Октября 2013, 11:46:39
-
Please help. From 17.10.213 yesterday about 22:00, the package will not work on CS-LINK 23E. We have several receivers, but it is not working anywhere. UPS to 0.8 W is in order.
-
We have several receivers, but it is not working anywhere.
Which receivers do you have? Which emulators are used? Where is your log-file?
Please read my signature and do what I request from all users.
regards
-
Please help. From 17.10.213 yesterday about 22:00, the package will not work on CS-LINK 23E. We have several receivers, but it is not working anywhere. UPS to 0.8 W is in order.
CS-LINK was deleted from the billing. You should change port to Skylink. Please go to billing and get new newcamd config line.
-
We have several receivers, but it is not working anywhere.
Which receivers do you have? Which emulators are used? Where is your log-file?
Please read my signature and do what I request from all users.
regards
I have a Receiver Dreambox DM800 HD, emulator MGCAMD 1.35A, where can I find logfile really do not know, I'm just a user. Were configured to mate two years ago, but even he does not know where to look logfile. Login password not want to write here, but i have one reciever name olicz and the other olicomp
First reciever:
CWS = serv2 20003 olicz XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = serv2 20024 olicz XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan
Second Reciever:
CWS = serv3 20003 olicomp XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = serv3 20024 olicomp XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardservCWS_KEEPALIVE = yes
UPC ( 0.8W) works
SkyLink (CS Link) 23E Dont Work
Tank You
-
We have several receivers, but it is not working anywhere.
Which receivers do you have? Which emulators are used? Where is your log-file?
Please read my signature and do what I request from all users.
regards
I know only mistake in the description. Of course SkyLink. Port of course, I have long since changed
I Have VIP CZECH
I have a Receiver Dreambox DM800 HD, emulator MGCAMD 1.35A, where can I find logfile really do not know, I'm just a user. Were configured to mate two years ago, but even he does not know where to look logfile. Login password not want to write here, but i have one reciever name olicz and the other olicomp
First reciever:
CWS = serv2 20003 olicz XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = serv2 20024 olicz XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan
Second Reciever:
CWS = serv3 20003 olicomp XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = serv3 20024 olicomp XXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardservCWS_KEEPALIVE = yes
UPC ( 0.8W) works
SkyLink (CS Link) 23E Dont Work
Tank You
-
You can find here http://www.cardsharing.cc/index.php?topic=26069.0 how to make log-file.
We need it to analyze where is the problem.
regards
-
You can find here http://www.cardsharing.cc/index.php?topic=26069.0 how to make log-file.
We need it to analyze where is the problem.
regards
Good day. According to the instructions I installed 3csyslog, triggered, but I never found described mg_cfz file. Even if I set the IP address of 10.0.1.100 reciever, nothing happened, I have no firewall, all ports are open. The instructions apparently missing one image that is necessary. Does not load se.Je can communicate using e.mail? I could insert pictures, but I have to address you.
thank you
-
I never found described mg_cfz file.
not mg_cfz, but mg_cfg file
try again until you have any results, I need no pictures and communication by e-mail. This is a forum for everybody. Read and learn how to make log-files. Without this, I will not accept any claims like "does not work".
Please prove it!
-
I never found described mg_cfz file.
not mg_cfz, but mg_cfg file
try again until you have any results, I need no pictures and communication by e-mail. This is a forum for everybody. Read and learn how to make log-files. Without this, I will not accept any claims like "does not work".
Please prove it!
I really do not know this advice. Why UPC operates at 0.8 W and Skylink 23E does not work on one reciever? It's a mystery. Nothing has changed this and last night it stopped working. 3csyslog discussed this with you, it's too complicated and the instructions to do nothing, in addition to instructions displayed completely. I can copy the data elsewhere? I am desperate, I have a young son and can not watch a fairy tale. Too much please help. Never in all three years was not a problem. Therefore, I would like to communicate via email and send all files you have available.
-
I never found described mg_cfz file.
not mg_cfz, but mg_cfg file
try again until you have any results, I need no pictures and communication by e-mail. This is a forum for everybody. Read and learn how to make log-files. Without this, I will not accept any claims like "does not work".
Please prove it!
I really do not know this advice. Why UPC operates at 0.8 W and Skylink 23E does not work on one reciever? It's a mystery. Nothing has changed this and last night it stopped working. 3csyslog discussed this with you, it's too complicated and the instructions to do nothing, in addition to instructions displayed completely. I can copy the data elsewhere? I am desperate, I have a young son and can not watch a fairy tale. Too much please help. Never in all three years was not a problem. Therefore, I would like to communicate via email and send all files you have available.
This is my configuration newcamd.conf on my Dreambox:
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dreambox
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = yes
DEBUG_CAM = yes
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = no
DEFAULT_CW_DELAY = 0
RELOAD_CONFIG_ON_ZAP = yes
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
CWS = serv3 20003 olicomp XXXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = serv3 20024 olicomp XXXXXXX 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS_KEEPALIVE = yes
CWS_CONNECT_TIMEOUT = 10
CWS_INCOMING_PORT = 10000
CWS_DEBUG_PORT = 22001
-
Please DO NOT SEND ME ANY YOUR CONFIGURATION FILES, I am not going to study them.
Forum is for you, to learn and to know - how to operate your receiver and settings in case of failure.
If you cannot read and learn how to do that, ask anybody who knows the subject to help you.
This is not a school and I am not a teacher, sorry.
All you need is to configure your mg_cfg file (use files from attachment from http://www.cardsharing.cc/index.php?topic=28611.0)
to properly set up Mgcamd emulator.
If you cannot do this, ask anyone who can do that.
regards
-
Please DO NOT SEND ME ANY YOUR CONFIGURATION FILES, I am not going to study them.
Forum is for you, to learn and to know - how to operate your receiver and settings in case of failure.
If you cannot read and learn how to do that, ask anybody who knows the subject to help you.
This is not a school and I am not a teacher, sorry.
All you need is to configure your mg_cfg file (use files from attachment from http://www.cardsharing.cc/index.php?topic=28611.0)
to properly set up Mgcamd emulator.
If you cannot do this, ask anyone who can do that.
regards
But I in no directory KEYS I have and I never had. The configuration is loaded into the directory Turbox and always has been - the whole three years. The whole three years everything worked and now all of a sudden stopped working SkyLink and UPC works stále.Jak is possible that half the service works and half not? In addition to the two reciever? Manuals are useless if you do not display images and not see what there is to be set. I was completely at a loss. In addition, I do a reciever recorded files from Vašedho link and rewrote my work and UPC. It really is puzzling, but if we do not lead to correct, then it is unnecessary to receive services that do not work and after three years we then had to cancel the subscription. I would but did not. I have always been satisfied
-
Let us start from the very beginning.
1. Do you have DCC (Dreambox Control Center) installed on your PC? If NO, install it.
-
Let us start from the very beginning.
1. Do you have DCC (Dreambox Control Center) installed on your PC? If NO, install it.
Yes, I have on my PC DCC, but I've never worked with it. I also have TeamViewer on your PC through Krar on my DB can look
-
OK, but how you edit your configuration files inside the Dreambox? How you upload the necessary files?
-
OK, but how you edit your configuration files inside the Dreambox? How you upload the necessary files?
I edited the configuration files via FTP always in notepad
-
2. Can you enter var folder of your Dreambox using FTP?
-
Looking at the time I am waiting for your reply - NO, you can't
-
2. Can you enter var folder of your Dreambox using FTP?
Yes, I am in your VAR. You do not want access TeamViever?
-
OK.
No, I want you to start using DCC.
3. Leave var folder and
4. enter usr folder and inside it, find keys folder. Enter keys folder.
-
OK.
No, I want you to start using DCC.
3. Leave var folder and
4. enter usr folder and inside it, find keys folder. Enter keys folder.
I use DCC. The "keys" is \ usr \ keys. I am in the folder
-
OK.
No, I want you to start using DCC.
3. Leave var folder and
4. enter usr folder and inside it, find keys folder. Enter keys folder.
I use DCC. The "keys" is \ usr \ keys. I am in the folder
-
Do you see mg_cfg file there?
-
There are only 2 files you need to configure your DreamBox: mg_cfg and newcamd.list
Do you see them?
-
Do you see mg_cfg file there?
Yes, I see. I've copied the file from your link, but then everything stopped working.
-
Of couse, everything stopped working because you forgot to restart emulator (using BLUE button). Did you restart emu after you changed information in the mg_cfg file?
-
Of couse, everything stopped working because you forgot to restart emulator (using BLUE button). Did you restart emu after you changed information in the mg_cfg file?
Both files are there. Newcamd.list there. It was originally the \ etc \ Turbox \ config, but I do copied the "keys"
-
One more question: do ALL files in the keys folder have attr.755?
-
Of couse, everything stopped working because you forgot to restart emulator (using BLUE button). Did you restart emu after you changed information in the mg_cfg file?
Both files are there. Newcamd.list there. It was originally the \ etc \ Turbox \ config, but I do copied the "keys"
Emulator I rebooted, after ten seconds, startet, but all intact - nothing works
-
Newcamd.list there. It was originally the \ etc \ Turbox \ config, but I do copied the "keys"
It should not be in \ etc \ Turbox \ config ! The only location for the both files is usr\keys ! Delete these files from \ etc \ Turbox \ config folder and restart emulator again!
-
One more question: do ALL files in the keys folder have attr.755?
NO - all have 696
-
All files - mg_cfg and newcamd.list files - should have attr.755! Right click each file, select Attributes and change parameter to 755 for both files.
Restart emulator.
-
(http://s020.radikal.ru/i710/1310/e4/071b5772b9fd.png)
you may use or may not use ignore.list or priority.list, it depends on your needs. You may also delete them as DreamBox is clever receiver and has clever operating system (Linux)
-
I have the same problem since yesterday evening but the UPC does work CSlink not works. All I have is good. I have the right settings. It works for me like that for two years now without a problem.Where is the problem?
thx
server5
-
All files - mg_cfg and newcamd.list files - should have attr.755! Right click each file, select Attributes and change parameter to 755 for both files.
Restart emulator.
I've set up, there's a 775, I deleted a file from newcamd.conf \ Turbox \ config, restart. Already working UPC, SkyLink still does not work
-
We are checking SkyLink in VIP Czech now, wait a bit
-
We are checking SkyLink in VIP Czech now, wait a bit
Thank you, I'll wait
-
We're just the two of us to whom it does not work? :(
-
Not 2, already more, we are checking, because 2 hours ago, SkyLink was working with VIP ALL, now it stopped working for all packages.