Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Questions on cardsharing server => SkyLink HD 23E => Тема начата: w@mp от 05 Октября 2011, 02:29:23
-
Hi, pls why the end of January 12, 2012? , It'd end Cryptoworks? Originally was to end, December 12, 2012 THX
-
This is question not to us, ask provider.
-
Hello today don't work no programme on Skylik on server2, please rectify a mistake
-
I have the same problem, no programs, server2.
-
Fixed
-
Thanks boys, working.
-
Hello, I have a serious question - want to make long-term subscription:
Skylink didnt tell anything about ending original CW cards (0D03) at 12th Jan 2012, these cards are only not able to be purchased. So I am surprised why this package will not be available after 12th Jan 2012..
Could you confirm you will provide 0D03 till they officially announce they will be stopped (not sooner than by the end of 2012)?
By the way, for new programs (MTV CZ HD, Nat Geo CZ HD etc.) there is an option to use special hybrid - ICE card - instead of pure IRDETO card. ICE card has no problem with sharing as it is hybrid of CW and Irdeto. Are you planning to include this ICE card to make available new channels? ICE CAID is 0D96 ..
Would appreciate if there is option to have full Skylink package incl. HBO, HBO Comedy, Cinemax etc.. Would this be possible in future?
Many thanks for your answer.
-
Skylink didnt tell anything about ending original CW cards (0D03) at 12th Jan 2012, these cards are only not able to be purchased. So I am surprised why this package will not be available after 12th Jan 2012..
Probably, they do not announce this officially on the site. However, we were warned that after 12.01.2012, the cards available will be disabled.
Could you confirm you will provide 0D03 till they officially announce they will be stopped (not sooner than by the end of 2012)?
Nobody will confirm you this, as we don't know what may happen in a couple of days. Everything depends on the Provider.
By the way, for new programs (MTV CZ HD, Nat Geo CZ HD etc.) there is an option to use special hybrid - ICE card - instead of pure IRDETO card. ICE card has no problem with sharing as it is hybrid of CW and Irdeto. Are you planning to include this ICE card to make available new channels? ICE CAID is 0D96 ..
It is not so easy to share different types of cards. It takes time to understand how it works outside the coupled receiver. You have to know that typically the card is extracted from the coupled (married) receiver and is used with a simple receiver. We are not sure that they (Provider) don't use a new level of protection against sharing. These types of cards work so that only one channel can be opened with one card (checked!). So, we refused using ICE cards (they are now similar to NOVA cards). It is easy to calculate - how many cards we need to open all channels available in the package...
Would appreciate if there is option to have full Skylink package incl. HBO, HBO Comedy, Cinemax etc.. Would this be possible in future?
Post these proposals in the corresponding topic. All offers are being read and understood by the Moderator. He will take final decision.
-
Skylink didnt tell anything about ending original CW cards (0D03) at 12th Jan 2012, these cards are only not able to be purchased. So I am surprised why this package will not be available after 12th Jan 2012..
Probably, they do not announce this officially on the site. However, we were warned that after 12.01.2012, the cards available will be disabled.
Well, I own 0D03 card and called several times to their technical support line asking them the way I dont want to participate in their Card Change action from 0D03 -> 0D96 with bonus and I want to use 0D03 as long as possible and I was told OK there is no problem at least to the end of 2012 because they MUST provide support to 0D03 cards sold by the end of 2010 - there is 2 years guarantee set by the law.
My 0D03 card is at least 7 years old and they confirmed several times I should not worry at least to the end of 2012 and in case of stop providing services through 0D03 I will be posted with a brief at least half year before stopping services planned date.
Could you confirm you will provide 0D03 till they officially announce they will be stopped (not sooner than by the end of 2012)?
Nobody will confirm you this, as we don't know what may happen in a couple of days. Everything depends on the Provider.
OK, I hope you will provide 0D03 services until they are stopped by provider and the date of 12.01.2012 is not from your head and you will not stop the packege although it will be functional on card.
By the way, for new programs (MTV CZ HD, Nat Geo CZ HD etc.) there is an option to use special hybrid - ICE card - instead of pure IRDETO card. ICE card has no problem with sharing as it is hybrid of CW and Irdeto. Are you planning to include this ICE card to make available new channels? ICE CAID is 0D96 ..
It is not so easy to share different types of cards. It takes time to understand how it works outside the coupled receiver. You have to know that typically the card is extracted from the coupled (married) receiver and is used with a simple receiver. We are not sure that they (Provider) don't use a new level of protection against sharing. These types of cards work so that only one channel can be opened with one card (checked!). So, we refused using ICE cards (they are now similar to NOVA cards). It is easy to calculate - how many cards we need to open all channels available in the package...
ICE cards are NOT coupled to receivers and you can buy them here without problem - this is same for old CW cards and new pure Irdeto cards as well. Skylink doesnot apply cards coupling to receivers. There are only "recommended receivers" being sold - because this makes provisions to Skylink for recommending 3rd parties to their customers. About sharing - my friend has this new ICE card 0D96 in reader connected to linux machine and is sharing his ICE card between 5 receivers(TV sets) in his big house. Really no problems. All you have to be careful is to have ICE card which emulates CW. With pure Irdeto card it is problem. With ICE (0D96), you can share current channels available on 0D03 plus all new channels without problems.
Would appreciate if there is option to have full Skylink package incl. HBO, HBO Comedy, Cinemax etc.. Would this be possible in future?
Post these proposals in the corresponding topic. All offers are being read and understood by the Moderator. He will take final decision.
Thanks, done that - http://www.cardsharing.cc/index.php?topic=11619.msg78002#msg78002
-
ICE cards are NOT coupled to receivers and you can buy them here without problem - this is same for old CW cards and new pure Irdeto cards as well. Skylink doesnot apply cards coupling to receivers. There are only "recommended receivers" being sold - because this makes provisions to Skylink for recommending 3rd parties to their customers. About sharing - my friend has this new ICE card 0D96 in reader connected to linux machine and is sharing his ICE card between 5 receivers(TV sets) in his big house. Really no problems. All you have to be careful is to have ICE card which emulates CW. With pure Irdeto card it is problem. With ICE (0D96), you can share current channels available on 0D03 plus all new channels without problems.
So true. Friend of mine is also sharing with ICE, no problems at all. ICE card can be bought in exchange called "vymena" for cca 21,-Ђ or brand new (SD ICE) for cca 60,-Ђ. Can we help somehow to you to get that ICE and make Skylink fully available?
-
You can send an e-mail to the Moderator (moderator at cardsharing.cc) with your offers and full description (reasonable).
Thank you
-
YES YES YES, 0D96 available !
many thanks for this, but Premium channels not working and new Skylink channels provided only on 0D96 also not working.. why? thanks for explanation.
-
Hallo, thank you very much for new ICE card Skylink-OD96. I have paid subscribtion for Skylink HD - 0D03. All channels are ok.
I would like to receive channels from ICE card Skylink-0D96, from a new port but none of them are working.
I have receiver Ariva200, protokol newcamd 525. How schould I process in this case. When I have submitted both ports, I have
received your email concerning rule violation. If I submitt former port everything runs ok, when I submitt the new one - I do
not receive any channels. Can you please advice me what is the problem?
-
Hallo, thank you very much for new ICE card Skylink-OD96. I have paid subscribtion for Skylink HD - 0D03. All channels are ok.
I would like to receive channels from ICE card Skylink-0D96, from a new port but none of them are working.
I have receiver Ariva200, protokol newcamd 525. How schould I process in this case. When I have submitted both ports, I have
received your email concerning rule violation. If I submitt former port everything runs ok, when I submitt the new one - I do
not receive any channels. Can you please advice me what is the problem?
Hi,
Ariva 200 HD is blacklisted http://www.cardsharing.cc/index.php?topic=26130.0
Change your receiver and you will be able to watch SkyLink without any problems!
regards
-
Hmm, i have DM800HD with iCVS (Gemini3), MgCamd 1.38 and same problem as others. If i try to access to new card caid 0D96 i got a error - no CW keys on this server. This problem related only with new card (Skylink ICE) on new port. Old cart works correctly without any problems but unfortunately also without new channels, which can be accessed only with new ICE card.
Thanks for reply.
-
same for me, I tried to disable port with 0D03 to try all the channels which should go through 0D96 and none of them is working..
I hope this will be fixed soon and we will get full channels offer including new channels available only through 0D96 and premium channels as well to have HBO HD CZ, HBO Comedy etc..
thanks for take a look at this issue.
-
Hello,
signed up just for letting you know that all Skylink ICE channels working like a charm, thanks a lot!
-
Hello,
signed up just for letting you know that all Skylink ICE channels working like a charm, thanks a lot!
Glad to here! :)
-
Cool, everything runs perfectly!!!!! 8) 8) 8)
-
Yes, 0D96 working now for me as well, including HBO HD and HBO Comedy - really great work :) I hope premium channels will stay working forever and are not only some temporary solution because of registrering new card and getting these channels as bonus :)
thanks again for this!
-
Channel Cs film from Skylink packet not working for the last few days. Will this be fixed please?
Also, is Skylink going to be available next month? I don't know if I should renew subscription. Thanks.
-
Hello, we'll check the package. Re: future subscription - please refer to the billing. If you see the price in the price list, it means that you can extend your subscription. If there is no price, it is impossible to prolong.
regards
-
Cs film is now working, thank you. But otherwise the channels are freezing extremely over the last few days. Please fix it.
-
Cs film is now working, thank you. But otherwise the channels are freezing extremely over the last few days. Please fix it.
What is Mgcamd 2.35 ?
-
Cs film is now working, thank you. But otherwise the channels are freezing extremely over the last few days. Please fix it.
What is Mgcamd 2.35 ?
Sorry I am actually using Oscam 1.20. Everything had been working very well before but for the last few days the channels from Skylink have been freezing.
-
Log?
-
It has been OK for the last few days so it was hopefully only a temporary problem. Thank you.
-
There is freezing again on Skylink. I sent you log from Oscam to your e-mail, please have a look.
-
Can anybody else confirm freezes on SkyLink?
-
I sent you log from Oscam to your e-mail, please have a look.
To which e-mail?
-
I sent you log from Oscam to your e-mail, please have a look.
To which e-mail?
moderator @ cardsharing.cc
-
for me and at least one other member, all packages are freezing since yesterday afternoon.
-
all packages are freezing since yesterday afternoon.
It can't be so otherwise everybody on the forum wouls tell about this. Check your internet or change server. There is no problem with packages.
-
Hi suma,
I'm terribly sorry that I broke the rules and published the IP server, I did not it on purpose and I am very sorry, sorry, please.
The further I want to use CardsharingServer and I regret that I can not read the reportand discussion on the Forum.
This ban will expire when?
The ban expires?
I ask for the answer to: markus1766@centrum.sk
This account will not be used!
(Even so, I think that IP server to find out who wants a $ 1)
markus1766 thx
-
Your ban will expire tomorrow.
-
Hi,
so far Markíza HD works,
but :
Markíza HD will only work for those interested after activation.
http://www.parabola.cz/clanky/5275/skylink-markiza-hd-bude-jen-pro-zajemce-po-aktivaci/
-
New channels added by Skylink:
* EDGE SPORT HD 11,739 GHz ASTRA3 V - 27500 - 2/3 - DVB-S2 - 8PSK
*Animal Planet CZ 11,739 GHz, pol. V, SR 27500, FEC 2/3, DVB-S2/8PSK
-
New channels added by Skylink:
Did you check if they are working or not before posting here?
There is no broadcast of the channels at the moment. When they are added in full, they will work by themselves.
-
OK, thx. BTW Skylink is not working now :
LOG
May 07 16:17:08 192.168.1.159 [mg0] service 3700 index 0 pmt pid 7D0 (1), pids: video 0x07DA, audio 0x07E4 0x07E5 0x07E6 0x07E7
May 07 16:17:08 192.168.1.159 CaPID: 0x0F16 ProvID: 000000
May 07 16:17:08 192.168.1.159 CaPID: 0x0F17 ProvID: 000000
May 07 16:17:08 192.168.1.159 CaPID: 0x002E ProvID: 000000
May 07 16:17:08 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
May 07 16:17:08 192.168.1.159 [mg0] network can't decode
May 07 16:17:08 192.168.1.159 [mg0] pid 0x0F16 failed to decode.
May 07 16:17:09 192.168.1.159 [mg0] No irdeto key(s) found for id 80 keynr 00
May 07 16:17:09 192.168.1.159 [mg0] network can't decode
May 07 16:17:09 192.168.1.159 [mg0] pid 0x0F17 failed to decode.
May 07 16:17:09 192.168.1.159 [mg0] No irdeto key(s) found for id 80 keynr 00
May 07 16:17:09 192.168.1.159 [mg0] network can't decode
May 07 16:17:09 192.168.1.159 [mg0] pid 0x002E failed to decode.
May 07 16:17:09 192.168.1.159 [mgcamd] emm started
May 07 16:17:09 192.168.1.159 CaPID: 0x0036 ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x0080 ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x080C ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x080D ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x080E ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x080F ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x0810 ProvID: 000000
May 07 16:17:09 192.168.1.159 CaPID: 0x0811 ProvID: 000000
May 07 16:17:09 192.168.1.159 [mgcamd] emm stopped
May 07 16:17:10 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
May 07 16:17:11 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
-
No problem
[mg0] <- CW from newcamd server_163:xxxxx (568ms)
[mg0] 568 msec -- Wed May 7 17:30:19 2014
===== Cryptoworks ECM on CaID 0x0D96, pid 0x0eb9 ======
prov: 000004
cw0:0 ED 7C 42 AB DB E8 D0 93
cw1:0 9A 8D 79 A0 13 54 9D 04
-
I have ddos protected server...not working...now
EDIT:
Working now..... :)
Respect.
-
Animal planet CZ and Edge sport is working now ... :)
-
CT D 23,5E 12 525 V, pilot off, FEC 3/4, SR 27500 do not work, black screen. Please fixt it. THX
-
CT D 23,5E 12 525 V, pilot off, FEC 3/4, SR 27500 do not work, black screen. Please fixt it. THX
Signature? Log-file?
-
Other channels are OK, only CT D is not working me and my friends.
VU+Solo2, Mgcamd 1.35
Jun 11 12:02:33 192.168.1.159 CaPID: 0x002E ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x002F ProvID: 000000
Jun 11 12:02:33 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Jun 11 12:02:33 192.168.1.159 ECM to newcamd XXX:XXX
Jun 11 12:02:33 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (34ms)
Jun 11 12:02:33 192.168.1.159 [mg0] network can't decode
Jun 11 12:02:33 192.168.1.159 [mg0] pid 0x002E failed to decode.
Jun 11 12:02:33 192.168.1.159 [mg0] No irdeto key(s) found for id 80 keynr 00
Jun 11 12:02:33 192.168.1.159 [mg0] network can't decode
Jun 11 12:02:33 192.168.1.159 [mg0] pid 0x002F failed to decode.
Jun 11 12:02:33 192.168.1.159 [mgcamd] emm started
Jun 11 12:02:33 192.168.1.159 CaPID: 0x00C9 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x0120 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x0110 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x0112 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x0111 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 CaPID: 0x0029 ProvID: 000000
Jun 11 12:02:33 192.168.1.159 [mgcamd] emm stopped
Jun 11 12:02:34 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Jun 11 12:02:34 192.168.1.159 ECM to XXX:XXX
Jun 11 12:02:34 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (41ms)
Jun 11 12:02:36 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Jun 11 12:02:36 192.168.1.159 ECM to newcamd XXX:XXX
Jun 11 12:02:36 192.168.1.159 [mg0] newcamd route XXX:XXX cant decode (39ms)
Jun 11 12:02:37 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
-
OK, we'll check it
-
Fixed
[mg0] <- CW from newcamd XXXXXXX:XXX32 (136ms)
[mg0] 136 msec -- Wed Jun 11 14:45:02 2014
system: Cryptoworks
caid: 0x0D96
pid: 0x002e
prov: 000004
cw0:0 17 25 03 3F A7 4A 62 53
cw1:0 CD 36 27 2A 85 1E 82 25
-
Confirmed. G8. THX.
-
Skylink 23,5 (all package) is not working now
Aug 05 15:45:23 192.168.1.159 [newcamd] Connecting to serverxxx:xxx
Aug 05 15:45:23 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
-
https://www.cardsharing.cc/index.php?topic=32541.new#new
-
Skylink 23,5 (all package) is not working now
Oct 05 19:03:18 192.168.1.159 [newcamd] Login to xxx:xxx as xxx failed (1039830ms)
Oct 05 19:03:29 192.168.1.159 got 89 cmd 9F
Oct 05 19:03:29 192.168.1.159 [mg0] namespace EB0000 t-id BC6 on-id 3
Oct 05 19:03:29 192.168.1.159 [mg0] descramble on 1, source 0
Oct 05 19:03:29 192.168.1.159 [mg0] service 1F43 index 0 pmt pid 402 (5), pids: video 0x00A2, audio 0x0028 0x0058 0x005B 0x0062
Oct 05 19:03:29 192.168.1.159 CaPID: 0x0F00 ProvID: 000000
Oct 05 19:03:29 192.168.1.159 CaPID: 0x0653 ProvID: 000000
Oct 05 19:03:29 192.168.1.159 CaPID: 0x060F ProvID: 000000
Oct 05 19:03:29 192.168.1.159 CaPID: 0x0F01 ProvID: 000000
Oct 05 19:03:29 192.168.1.159 CaPID: 0x0026 ProvID: 000000
Oct 05 19:03:29 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
Oct 05 19:03:29 192.168.1.159 [mg0] network can't decode
Oct 05 19:03:29 192.168.1.159 [mg0] pid 0x0F00 failed to decode.
Oct 05 19:03:29 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D0F provid 04 keynr 01
Oct 05 19:03:29 192.168.1.159 [mg0] network can't decode
Oct 05 19:03:29 192.168.1.159 [mg0] pid 0x0653 failed to decode.
Oct 05 19:03:29 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D03 provid 04 keynr 00
Oct 05 19:03:29 192.168.1.159 [mg0] network can't decode
Oct 05 19:03:29 192.168.1.159 [mg0] pid 0x060F failed to decode.
Oct 05 19:03:29 192.168.1.159 [mg0] No irdeto key(s) found for id 80 keynr 00
Oct 05 19:03:29 192.168.1.159 [mg0] network can't decode
Oct 05 19:03:29 192.168.1.159 [mg0] pid 0x0F01 failed to decode.
Oct 05 19:03:30 192.168.1.159 [mg0] No irdeto key(s) found for id 80 keynr 00
Oct 05 19:03:30 192.168.1.159 [mg0] network can't decode
Oct 05 19:03:30 192.168.1.159 [mg0] pid 0x0026 failed to decode.
Oct 05 19:03:30 192.168.1.159 [mgcamd] emm started
Oct 05 19:03:30 192.168.1.159 CaPID: 0x00C9 ProvID: 000000
Oct 05 19:03:30 192.168.1.159 CaPID: 0x0120 ProvID: 000000
Oct 05 19:03:30 192.168.1.159 CaPID: 0x0112 ProvID: 000000
Oct 05 19:03:30 192.168.1.159 CaPID: 0x0111 ProvID: 000000
Oct 05 19:03:30 192.168.1.159 CaPID: 0x0029 ProvID: 000000
Oct 05 19:03:30 192.168.1.159 [mgcamd] emm stopped
Oct 05 19:03:31 192.168.1.159 [mgcamd] Cryptoworks key(s) not found for caid 0D96 provid 04 keynr 00
-
[newcamd] Login to xxx:xxx as xxx failed (1039830ms)
-
I reboot the system and its working now....Sorry to bother you...but it was my first time freezing system. THX.
-
From your log-file, it is clear that you are trying to use delayed decoding (to decode the recorded TV-programs). It is not allowed by the server rules
https://www.cardsharing.cc/index.php?topic=32619.0
Server RULES
- delayed decoding It is strictly prohibited to use delayed decoding for our server (telecast records decoding). With such decoding, queries are being sent to the server 30 times faster than during general viewing resulting in cards overload.
1 request per 10 seconds for max.1 SID
-
THX for warning, but I was just watching one channel (History HD) when the picture freeze, no recording was used. Maybe some soft bug, but no changes was made on my Vu+Solo2 long time. After rebooting system +enigma was everythink ok.
-
Hello
I paid service VIP ALL. All packets are functioning correctly, but SkyLink HD is not working !!!!
Login to port is fine. In the log file, no error, but no picture. It's very strange.
I use Prof Revolution 8000 + CSC 4.0.0.2 + DVBDream
Can you help ?
thx
-
Hi
I have new information.
Your "CSC 4.0.0.2" plugin decodes all packets correctly, but Skylink not.
I had to use "WinCSC 1.2.0 (http://www.dvbskystar.com/dwd/WinCSC_120_build_2483.zip)" plugin that works with Skylink packet correctly.
The problem was resolved
-
Your "CSC 4.0.0.2" plugin
Hi,
This is not OUR plugin, we just recommend using VARIOUS versions of it, as there is a great number of DVB cards and software COMPATIBLE. Of course, in some cases, other version will work, not necessarily 4.0.0.2. It may be 4.0.0.1-4.0.0.4, in some cases - even Acamd. We just provide general recommendations for general users, but since manufacturers go ahead, we cannot give recommendations for any plugin in particular case. You know, different equipment, different software, etc.
However, I am glad that you solved your problem.
Please be noted that WinCSC is blacklisted and you use it at your own risk https://www.cardsharing.cc/index.php?topic=3627.0 and if some day, you will find yourself banned, read this again.
Recommended plugins https://www.cardsharing.cc/index.php?topic=19680.0
-
Just for info. Everythink is OK. But skylink is testing something. Only one ECM is requested now except Disney channel (one ECM per 10 sec-its normal).
Nov 19 18:50:51 192.168.1.159 ECM to newcamd xxx:xxx
Nov 19 18:50:51 192.168.1.159 [mg0] <- CW from newcamd xxx:xxx (28ms)
Nov 19 18:50:51 192.168.1.159 [mg0] 28 msec -- Wed Nov 19 18:51:08 2014
Nov 19 18:50:51 192.168.1.159 ===== Cryptoworks ECM on CaID 0x0D96, pid 0x002e ======
Nov 19 18:50:51 192.168.1.159 prov: 000004
Nov 19 18:50:51 192.168.1.159 cw0:0 96 34 94 5E AA F9 93 36
Nov 19 18:50:51 192.168.1.159 cw1:0 7A 39 FD B0 9C 73 97 A6
Nov 19 18:51:06 192.168.1.159 [mgcam] read error error 145: Connection timed out
Nov 19 18:51:21 192.168.1.159 [mgcam] read error error 145: Connection timed out
Nov 19 18:51:36 192.168.1.159 [mgcam] read error error 145: Connection timed out
-
Hi,
Thanks, we know about this and monitor the situation.
regards