CardSharing Server ENG > Emulators&Plugins (discussion)
MPCS. Description
suma:
It is a server/client for cardsharing rather than emulator.
It supports:
1. - various Humax receivers. They support two serial protocols - HSIC and SSSP.
2. – a lot of Arion-type receivers (Fergusson, Termal, Powersky, Openbox 6x0 and 130 etc., etc.). All of them have a common feature (for sharing purpose) – special firmware with Bomba serial protocol for sharing is used.
“Sharing” item in the “Games” MENU except for EMU is available in such firmware.
3. - receivers supporting DSR9500 protocol (initially appeared in Samsung). Openbox300 and 8x0 are among them.
MPCS can be run as a server for more than a month without restarting.
When in the sharing mode (client), it is required to enter your data in the two files only – mpcs.conf and mpcs.server, all the remaining files should be left unchanged.
If СОМ-1 is used, it is required to enter ttyS0-0, if СОМ-2 is used, you have to enter ttyS1 etc. in the following string-
Device = dsr9500@/dev/ttyS0?delay=1&timeout=300
In Device strings = ABCDE.ru,1111
Where ABCDE.ru –is card-sharing server address, 1111-is a port number.
The places highlighted in green are those where you enter your data.
So, download MPCS archive from here: http://www.cardsharing.cc/index.php?topic=550.0
We need 3 files inside the archive to configure:
mpcs.conf
[global]
Nice = -20
#LogFile = log
#LogFile = /dev/tty
ClientTimeout = 5
LogFile = stdout
[camd35]
Port = 2222@1722:000000
[newcamd]
Key = 0102030405060708091011121314
Port = 1111@0500:020710;3333@090F:000000;5555@0500:021500
[serial]
Device = tuner@/dev/ttyS0?delay=1&timeout=400 (for those who has receiver connection via COM-1 port; for the 2nd port: Device = tuner@/dev/ttyS1 )
Pay attention to the string with Port. It should specify all the ports used for running the service. It should be written in the following format: Port No @ CAID:IDENT;
In case if one Port is used for more than two packages but with the same CAID the string looks like this:
Port No @ CAID:IDENT,IDENT,IDENT,IDENT;
@- separates the required Port from the required CAID
;-is used before entering the new Port No.
,-is put while enumerating the IDENTs used for one Port
mpcs.server
[reader]
Label = NTV+
Protocol = newcamd
Key = 0102030405060708091011121314
Device = ABCDE.ru,1111(unreal server here as an example)
Account = user,pass(your login and password to log-in to the server)
CAID = 0500
IDENT = 0500:020710
Fallback = 0
Group = 1
[reader]
Label =MCT
Protocol = newcamd
Key = 0102030405060708091011121314
Device = ABCDE.ru,5555
Account = user,pass
CAID = 0500
IDENT = 0500:021500
Fallback = 0
Group = 1
[reader]
Label = PREMIERE
Protocol = camd35
Device = ABCDE.ru,2222
Account = user,pass
CAID = 1722
IDENT = 1722:000000
Fallback = 0
Group = 1
[reader]
Label = VIASAT
Protocol = newcamd
Key = 0102030405060708091011121314
Device = ABCDE.ru,3333
Account = user,pass
CAID = 090f
IDENT = 090f:000000
Fallback = 0
Group = 1
mpcs.user
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
IDENT = 0500:020710,021500;1722:000000;090f:000000
Protocol = newcamd (if newcamd protocol is used, one or several packages can be used by the same port number, but the individual [reader] should be assigned to each port number).
Protocol = camd35 (if camd35 protocol is used, all the packages are assigned to the only port number).
You can change the values in those strings with comments only.
suma:
MPCS is a plug-in used for receivers with RS 232 connection (Humax, Openbox, etc).
Download mpcs-0.8k-rc13o-i386-pc-cygwin from here http://download.satcode.biz/index.php?cid=2
suma:
Sharing with Golden Interstar .
To configure MPCS plug-in, you need to enter the following information to 3 files.
1. mpcs.conf
2. mpcs.server
3. mpcs.user
mpcs.conf
[global]
#LogFile = log
ClientTimeout = 5
LogFile = /dev/tty
[serial]
# Golden Interstar
Device = gi://tuner@/dev/ttyS0
mpcs.server
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = xxx.xxx.xxx.xxx,port
Account = login,password
Fallback = 0
Group = 1
mpcs.user
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
IDENT = 0500:020680
##############################################
IN ORDER TO VIEW DIFFERENT PROVIDERS, THE FOLLOWING SETTINGS ARE REQUIRED:
________________________________________________________
mpcs.user,
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
IDENT = 0500:02700
Enter the name of the other provider to the line IDENT = 0500:02****
If encryption is the same, use comma:
IDENT = 0500:020880,020700
If the encryption is different, use semicolon:
IDENT = 0500:020550;090F:0
mpcs.server
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = хх.хх.хх.хх,9000
Account = *****,хххх
Fallback = 0
Group = 1
If ports or servers are different, add one more section reader. It will resulted in the following:
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = хх.хх.хх.хх,9000
Account = ****,хххх
Fallback = 0
Group = 1
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = хх.хх.хх.хх,90000
Account = *****,хххх
Fallback = 0
Group = 1
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
USEFUL INFO....
In the main menu of the receiver select "Card"
Press "ОК", select "CardShare", press "ОК":
CardShare->ON
MODE->CLIENT
CLIENT->1
EMU is switched on pressing 2580 in the main menu.
The following softwares are the best for correct interaction of the receiver and mpcs:
DSR8001PR-S-2Jun2006.zip Client
DSR7700PR-2Jun2006.zip ServerClient
You may download the receiver software from here:
http://www.gisclub.ru/upload/index.php?&direction=0&order=&directory=Golden%20Interstar/Home@Sharing
====================================================================
please check for yourself and leave your comments here.
suma:
Due to rather frequent requests, you will find here [reader]-s for newcamd protocol. The remaining information for your settings you will make by yourself.
Please note, that you need to change 2 lines in each reader ONLY:
Device = IPserver address, port -xxx.xxxxx.org and No. of port via comma.
Account = login, password
Data required for "Device" you will receive automatically while paying in the billing system, login and password are used the same as for BILLING.
mpcs.server
[reader]
Label =via
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0500
Group = 1
#Fallback = 1
[reader]
Label = viasat
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 090f
Group = 1
#Fallback = 1
[reader]
Label = MDG canalsatelit19+Cyfra+digital+19
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0100
Group = 1
#Fallback = 1
[reader]
Label = NGR_POLSAT13-Digital+19
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 1801
Group = 1
#Fallback = 1
[reader]
Label = UPC DIRECT 19
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D02
Group = 1
#Fallback = 1
[reader]
Label = Czech Link 23,5
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D03
Group = 1
#Fallback = 1
[reader]
Label = EasyTV
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D0C
Group = 1
#Fallback = 1
[reader]
Label = IRD Nova
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0604
Group = 1
#Fallback = 1
[reader]
Label = Albania SAT-16
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0662
Group = 1
#Fallback = 1
[reader]
Label = Digi-16,technisatMTV-19,canalDIGITAL-1
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0B00
Group = 1
#Fallback = 1
[reader]
Label = InXtc
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 4A70
Group = 1
#Fallback = 1
[reader]
Label = TPS-13,CanalSatNiderlans-19
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0100
Group = 1
#Fallback = 1
[reader]
Label = VIA_ALL
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0500
IDENT =022600,020A00,020A10,020A20,020A30,020A40,024400,024400,024410
Group = 1
#Fallback = 1
[reader]
Label = ITV_PARTNER-16
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D06
Group = 1
#Fallback = 1
[reader]
Label = DIGITURK-7e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D00
Group = 1
#Fallback = 1
[reader]
Label = Premiera-19e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 1702
Group = 1
#Fallback = 1
[reader]
Label = Premiera-19e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 1722
Group = 1
#Fallback = 1
[reader]
Label = Sky_Italy
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0919
Group = 1
#Fallback = 1
[reader]
Label = SkyUK-28e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0960
IDENT = 0960:000000
Group = 1
#Fallback = 1
[reader]
Label = SkyUK-28e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0961
Group = 1
#Fallback = 1
[reader]
Label = Arena-19e
Protocol = newcamd
Key = 0102030405060708091011121314
Device = IPserver address,port
Account = login,password
CAID = 0D22
Group = 1
#Fallback = 1
=======================================
mpcs.conf
[global]
Nice = -1
#LogFile = log
#LogFile = /dev/tty
ClientTimeout = 5
LogFile = stdout
[serial]
Device = tuner@/dev/ttyS0?delay=1&timeout=400
please check the number of COM port:ttyS0=соm1,....ttyS1=соm2
======================================
mpcs.user
[account]
User = tuner
Pwd = tuner
#Uniq = 1
Group = 1
mcvaidas:
hello. i have sharing (client) prem**re but newcamd protocol and mpcs dont work with prem**re on newcamd protocol. with camd3 pritocol is all ok. how cam i setup mpcs foe prem**re wit newcamd protocol?
2006/12/16 22:50:02 4052 p02 expected MSG_CLIENT_2_SERVER_LOGIN_ACK (E1), rece
ived FF
Навигация
Перейти к полной версии