BT Sport not decoding

[nemesis]

Should I add hash # on the front of old lines or just add new ones under?

Mod-please remove my post above please, thank you.

[kommando]

I added 2 new lines and kept the old ones but no joy on BT, the port used is unchanged when it should be picking up the new port.

Channel: Unknown channel (SkyUK)
SID: C4C8 ******
CAID@IDENT: 0963

Aug 15 19:44:04 192.168.1.125 [mg0] newcamd route ******* cant decode (59ms)
Aug 15 19:44:04 192.168.1.125  ECM to newcamd ********
Aug 15 19:44:04 192.168.1.125  Server: -- Sat Aug 15 19:43:42 2015
Aug 15 19:44:04 192.168.1.125 ----------------------------------------------------
Aug 15 19:44:04 192.168.1.125 000: 80 70 69 00 00 01 0e df 0f 95 7a ff ff 00 81 11  .pi.......z.....
Aug 15 19:44:04 192.168.1.125 010: 20 01 00 00 bd 56 7e 0a 96 d2 c4 b6 85 78 70 1e   ....V.......xp.
Aug 15 19:44:04 192.168.1.125 020: 76 3f 90 48 c0 04 ea 95 62 95 68 70 da 19 52 b1  v?.H....b.hp..R.
Aug 15 19:44:04 192.168.1.125 030: 86 0a cc 12 5d cb 40 eb 01 50 2f d0 d5 da 50 1d  ....].@..P/...P.
Aug 15 19:44:04 192.168.1.125 040: a6 fa 4f ad a9 be a5 79 15 d5 c2 da 5e 5d 0b df  ..O....y....^]..
Aug 15 19:44:04 192.168.1.125 050: 79 5e e4 0f 41 47 86 18 68 cd f3 bd 45 ee 6a a3  y^..AG..h...E.j.
Aug 15 19:44:04 192.168.1.125 060: e0 fd 45 1f 5e 85 10 d1 20 9a 8e f1               ..E.^... ...

So maybe the hash is needed, other than BT rest of channels are ok still.

I use DCC 2.96 to connect to the dreambox and then use FTP to go to folder Var/Keys and then right click on Newcamd.list and select edit, you can then add the lines.

[TechGuy]

Any chance of a workaround for Cccamd users? similar to the newcamd fix you provided?

It shoud work for Cccam protocol - no changes needed

[nemesis]

i just put hash before old lines, ive added new lines and my bt1 and bt2 works now.@kommando softcam reboot is required

[kommando]

Well I am connected to both ports as I have left 4 lines without hash as per the subscription page.

Current connections
2    - for port ****1
2    - for port ****2

Maybe connected to CAID 0963 vs CAID 0960.

Recording now so not more testing until the morning.

[FlashG]

Cccamd, yes both working now, thanks TechGuy.

[nelutu292002]

I don't if for you guys working, but on mine does not work , i tried to re-scan but still not decoding.
I am using newcamd and my question is do I still need to add that line in settings?if yes, can you please tell me how do it or at least provide the command line.

thanks in advance.

[kommando]

Still getting nowhere, Newcamd was not working so have gone to CCCamd through Mgcamd showing as    CCcam 2.0.1 (mgcamd), all other channels as being decoded and still no joy.

Removed all BT channels, rescanned but they still will not decode, port is showing as correct port for CCCamd

Channel: Unknown channel (SkyUK)
SID: C4C8
CAID@IDENT: 0963
For port: ******

Aug 16 09:18:47 192.168.1.125 [mg0] cccamd route ******** cant decode (55ms)
Aug 16 09:18:47 192.168.1.125  ECM to cccamd ******** (00000066)
Aug 16 09:18:47 192.168.1.125  Server: -- Sun Aug 16 09:18:45 2015
Aug 16 09:18:47 192.168.1.125 ----------------------------------------------------
Aug 16 09:18:47 192.168.1.125 000: 81 70 69 00 00 01 0e df 10 42 52 ff ff 00 81 11  .pi......BR.....
Aug 16 09:18:47 192.168.1.125 010: 20 01 00 00 43 56 7e 0a c6 ec 6e ac 01 07 d5 d0   ...CV....n.....
Aug 16 09:18:47 192.168.1.125 020: 76 74 90 48 c0 04 d9 9e bf 48 d3 9e bc 59 b6 04  vt.H.....H...Y..
Aug 16 09:18:47 192.168.1.125 030: 06 ef ee d3 6c 99 f2 77 22 55 45 31 6f dd 3a 3b  ....l..w"UE1o.:;
Aug 16 09:18:47 192.168.1.125 040: 29 c4 79 ea 0e e0 a9 44 58 e9 a2 8b 35 66 ce fa  ).y....DX...5f..
Aug 16 09:18:47 192.168.1.125 050: 7c 82 cc 8e 7e e4 e0 8b 47 06 53 31 f5 a4 3b 80  ........G.S1..;.
Aug 16 09:18:47 192.168.1.125 060: 67 6f 7c c4 6a a1 ba ae d9 7f c8 5e               go..j......^
Aug 16 09:18:47 192.168.1.125 

[jhmiller]

Only have option to run OSCam with either newcamd or Cccam. Tried both protocols without success

Код: [Выделить]

2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 0963 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 0961 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 0960 ECM_PID: 0500 PROVID: 000000
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 found 3 ECMpids and 1 STREAMpids in PMT
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 receiver wants to demux srvid C4A5 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 new program number: C4A5 (0963:C4A5 unknown) [pmt_list_management 3]
2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
2015/08/16 11:25:53   42F418 c      (ecm) tvh (0963&000000/FFFF/C4A5/6C:932C2B476DCD6E3060CD6729D215592E): rejected  (100 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01   42F418 c      (ecm) tvh (0963&000000/FFFF/C4A5/6C:A5D614464135E50E454A2AADB5AA9127): rejected  (2 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01   42F418 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2015/08/16 11:26:01   42F418 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
and so on.......


[suma]

to kommando
1. Don't change newcamd.list, leave it as it is
2. Create cccamd.list in the same directory where newcamd.list and mg_cfg are located
3. Go to the billing, My subscription
4. Under the table with your subscription details, you will see Settings for emulator CCCAM for Cccam protocol. Click settings for Cccam protocol. You will need C line (there are two C lines - with the main and back-up server).
5. Copy both C lines and paste to cccamd.list
6. In mg_cfg file, change G parameter from 01 to 32
7. Note: in your receiver, MgCamd must be active.
8. Reboot MgCamd emulator. That's all you need.

[kommando]

Suma, that is not exactly what I did, I still have the Newcamd.list there, I created cccamd.list and added in the lines from the subscription page and edited the Mg_cfg so the network mode changed from 01 Newcamd to 32 cccamd. This works for all channels except for BT and my connections history shows the correct cccamd port from my subscriptions is being used. I did a full reboot as well just to be sure.

Only clue is the Setana channels do not decode either but never use them so do not know if they ever decoded and do not need them anyway.

I followed these instructions

Settings for emulator MGCAMD for Cccam protocol
The configuration file - /var/keys/cccamd.list

In order to make Cccam protocol to be active within mgcamd emulator, it is required to specify G: { 32 } parameter in mg_cfg file. C-lines should be added to /var/keys/cccamd.list file.

[suma]

Yes, quite right.
However, I still see 0963 in your log-file

2015/08/16 11:25:53   42F418 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0963 PROVID 000000 ECMPID 0500 ANY CHID PMTPID 0000 VPID 001E
2015/08/16 11:25:53   42F418 c      (ecm) tvh (0963&000000/FFFF/C4A5/6C:932C2B476DCD6E3060CD6729D215592E): rejected  (100 ms) by "##server name##" (F/2/2/2)
2015/08/16 11:26:01   42F418 c      (ecm) tvh (0963&000000/FFFF/C4A5/6C:A5D614464135E50E454A2AADB5AA9127): rejected  (2 ms) by "##server name##" (F/2/2/2)
when 0960 is required.
Have you checked your ignore and priority lists? Is 0963 present somewhere?

[kommando]

Suma

0963 is not in ignore, and is in priority

0960 is in ignore and is not in priority

I only have 2 lines in cccamd.list as I generated it from a blank file, both are C lines

[suma]

That is why you can't decode BT channels.
Replace 0963 with 0960 and vv and restart

[kommando]

Thanks, could you confirm then

I need

0960 in ignore but not in priority

0963 in ignore but not in priority

[suma]

Thanks, could you confirm then

I need

0960 in ignore but not in priority

0963 in ignore but not in priority

Vice Versa:

0960 - in priority
0963 - in ignore

[suma]

I will explain for future:

In your log-file, CAID 0963 is rejected. Emulator needs CAID 0960, but it is in your ignore list. It means that CAID 0963 is in your priority.list (if you use priority list). You need to delete CAID 0963 from priority.list and place it to ignore.list for emulator to ignore it.
And, consequently, in your case, 0960 was ignored, but shall be in priority for emulator to select the right CAID (in our case, it is 0960).

[kommando]

Yes, got BT back  but now lost rest of Sky, so its the solution for 0963 but looks like 0960 is now being rejected or is something else wrong.

Ignore

X: { 09 63 }
X: { 09 61 }

Priority

V: { 04 06 00 }
V: { 04 28 00 }
X: { 06 02 }
X: { 06 52 }
X: { 09 60 }
X: { 4A E1 }
X: { 0D 96 }
X: { 18 33 }

I can get round it as I only need BT Sport for MotoGP but would like to have both.

[suma]

kommando, why are you using ignore and priority lists?
Dreambox is a clever machine and emulator understands quite well which CAID is needed and which is not.
Try to delete both - ignore and priority lists - and see what happens.
Don't forget to reboot emulator after you delete both files.

[kommando]

I was just following the posts when I set the box up 18 months ago to access the service, the files came from this forum and as it worked I left them in place. I have renamed them by adding old and will try later when the latest recording has finished. This is the first issue in 18 months where the setup has been the problem.

Thanks for all your advice.