Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: some freezes on NC+ package  (Прочитано 5043 раз)

heniek

  • Пользователь
  • **
  • Сообщений: 16
some freezes on NC+ package
« : 28 Февраля 2020, 13:50:07 »
hi,
NC+ package, two receiver setup, issues with video freezing on only one of receivers -> Octagon SF8008 (openATV 6.2), both only one plugin installed: oscam-stable 1.20_svn-r11570 via cccam protocol, no warnings on connection history, it happens on all channels. On other receiver everything works fine.
exact oscam.server file content as from recommendations.

live log from oscam shows all the time only:
(ecm) dvbapi (0100XXX): found (513 ms) by XXX_main_cardsharing.co
but still video freezes for few seconds every 10-15 seconds

i found few other errors, i'm not sure whether they are connected to my issue

any hints ?

(dvbapi) Demuxer 0 stopped descrambling for program 0C26 unknown)
  (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 095A PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 5-2-2018
 (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 095A PROVID: 000068
  (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 0892 PROVID: 000000
 (dvbapi) Demuxer 0 found 9 ECM pids and 7 STREAM pids in CA PMT
  (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
  (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0100 PROVID 000068 ECMPID 095A ANY CHID PMTPID 0446 VPID 0252



(dvbapi) Demuxer 0 found 11 ECM pids and 4 STREAM pids in CA PMT
 (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0100 PROVID 000068 ECMPID 17FF ANY CHID PMTPID 03F2 VPID 03F3
 (dvbapi) *** WARNING: BAD TIME AFFECTING WHOLE OSCAM ECM HANDLING ****
 (ecm) dvbapi (0100): found (111 ms)
(dvbapi) Demuxer 0 stopped descrambling for program 0001 (0100@000068:0001 unknown)
(dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1EDD PROVID: 050600

heniek

  • Пользователь
  • **
  • Сообщений: 16
Re: some freezes on NC+ package
« Ответ #1 : 28 Февраля 2020, 14:37:15 »
ok, those freezes seems to be solve by applying NEWCAMD settings for oscam.server file. so we could close it,i dont want to mess with the other receiver while it works fine,so just to confirm, having two receivers, on one its oscam via cccam and on the other one oscam via newcamd

Current connections
1   - for port xxxx
1   - for port xxxx
Connections by emulators:
8   - CCcam 2.3.2
1   - OSCam

is that fine with your server rules ?

heniek

  • Пользователь
  • **
  • Сообщений: 16
Re: some freezes on NC+ package
« Ответ #2 : 28 Февраля 2020, 15:54:18 »
the thing is that oscam via newcamd solves the issue of freezes, but at the same time it creates another issues with C+4K channel, i have basically black screen, no video or audio, on oscam via cccam protocol it used to work, with some freezes from time to time, but now its gone.

zdeneksmetana

  • Новичок
  • *
  • Сообщений: 1
Re: some freezes on NC+ package
« Ответ #3 : 29 Февраля 2020, 10:54:04 »
can you confirm that you have freze with canal 4k on oscam and this decoder sf8008, have this same, all chanels works fine,only 4k Problem. 
Octagon 4K sf 8008 , cccam, Package VIP Poland

heniek

  • Пользователь
  • **
  • Сообщений: 16
Re: some freezes on NC+ package
« Ответ #4 : 29 Февраля 2020, 12:06:35 »
can you confirm that you have freze with canal 4k on oscam and this decoder sf8008, have this same, all chanels works fine,only 4k Problem.

that's right, oscam via newcamd protocol, via cccam same thing, all channels without any issues besides C+4K, well as they say its in 'test mode'

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

heniek

  • Пользователь
  • **
  • Сообщений: 16
Re: some freezes on NC+ package
« Ответ #6 : 29 Февраля 2020, 16:44:34 »
https://www.cardsharing.cc/index.php?topic=35620.msg130285#msg130285

I assume its about FCC/FBC things. FBC is not even present in my Octagon, that is in those most expensive boxes like Vu+
FCC is a plugin also rather Vu+ specific, not even visible in OpenATV GUI which I have.

in oscam.server (oscam via newcamd) I have also applied:

disablecrccws = 0
disablecrccws_only_for = 098C:000000;09C4:000000;1884:000000
dropbadcws  = 0
disablecrccrws = 1


Guys there's el classico in 4K tomorrow evening, do sth with it ;)

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: some freezes on NC+ package
« Ответ #7 : 01 Марта 2020, 03:22:37 »
No, it's not. I assume that you have to contact Moderator for assistance.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic