Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Need help with setting up mgcamd.  (Прочитано 8594 раз)

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Need help with setting up mgcamd.
« : 22 Июня 2013, 20:15:41 »
Hi,

I recently subscribed to a Sky Uk package and i started off with using ccam and it was working fine. But after some time i begin to experience difficulties with it so i switched to mgcamd 1.35a and pasted the cws line in newcamd.list but the premium channels are still not working.

PS - I am quite new to cardsharing  so my knowledge is extremely limited.
DM500S, mgcamd 1.35a, newcamd

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need help with setting up mgcamd.
« Ответ #1 : 22 Июня 2013, 20:23:04 »
Hi,
What do you mean by "premium" channels?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #2 : 22 Июня 2013, 20:37:44 »
The ones included in the package i subscribed to i.e Sky sports, movies etc.
DM500S, mgcamd 1.35a, newcamd

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need help with setting up mgcamd.
« Ответ #3 : 22 Июня 2013, 20:43:04 »
DM500S, mgcamd 1.35a, newcamd - you told nothing about your settings, you did not provide log-file.
1. what is your mg_cfg file?
2. do you use softcam.key?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #4 : 22 Июня 2013, 20:45:54 »
What do i need to tell you about the settings and how do i give you the log file? As i said i am a complete noob.  :-[
DM500S, mgcamd 1.35a, newcamd

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need help with setting up mgcamd.
« Ответ #5 : 22 Июня 2013, 20:50:56 »
I see that you are a complete noob. Have you ever tried to read the forum? Or you hope that i will tell you what is written on the forum from the very beginning to the very end?
People, try to read and learn what is written on the forum!
We are not a school for noobies. We are sharing server, where users buy a subscription and start watching.
If you think that I will start teaching you, you are mistaken.
If you don't want to read the forum, I don't want to teach you...


regards
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #6 : 22 Июня 2013, 20:55:15 »
I have read the forum and placed the appropriate files like ignore.list, priority.list etc in to the var/keys folder. In fact i seem to have done everything written on the forum regarding this matter but i still get a black screen. I only started this thread after having gone through all the threads on the forum related to this subject.
DM500S, mgcamd 1.35a, newcamd

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need help with setting up mgcamd.
« Ответ #7 : 22 Июня 2013, 21:05:06 »
suma might provide a link, but at the end you can find enough infos here in the forum about creating a logfile

do you have problems with any channel from the SkyUK-package, or only with the Sky PREMIUM channel (official Sky premium channels are all the channels without advertising breaks like Sky Comedy(HD), Sky Action(HD), Sky Sports...), the "normal channels" are ITV2-4-HD, dmax, Sky1, Sky2, Comedy channels etc

perhaps start to post your mg_cfg file and the newcamd.list-file (but without complete server, only use something like serv1, serv2 etc and also without complete port-number like xxx12)
do you have any other file with the extension list in your mgcamd-config-folder (like replace.list, ignore.list, priority.list) ?

within the temp- or tmp-folder you should find some mgcamd- and ecm-files on your box if Mgcamd is running and trying to decode a channel - post the content of the file (except complete server name and port number)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #8 : 22 Июня 2013, 21:13:12 »
None of the sky uk channels are working for me with mgcamd mate.
DM500S, mgcamd 1.35a, newcamd

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #9 : 22 Июня 2013, 21:29:59 »
@ jogi, this is content i found in the ecm0.info file found in the temp folder.


system:     Videoguard (News Datacom)
caid:       0x963
provider:   Unknown
provid:     0x000
pid:        0x513
using:      newcamd
address:    serv5:xxx42
hops:       1
ecm time:   0.160
DM500S, mgcamd 1.35a, newcamd

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #10 : 22 Июня 2013, 21:57:15 »
This is my mg_cfg file.

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32   cccamd netclient, card list saved as /tmp/cccamd.info
#       (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 360 3600

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 60 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 } root password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 31 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
DM500S, mgcamd 1.35a, newcamd

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #11 : 22 Июня 2013, 22:08:54 »
I got it to work!!! Apparently all i had to do was to delete the example in the necamd.list.example and it started working.  :)
DM500S, mgcamd 1.35a, newcamd

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: Need help with setting up mgcamd.
« Ответ #12 : 23 Июня 2013, 20:37:56 »
Nobody but only you can check and compare if everything is OK with your config files. As you see, that was so simple...
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #13 : 24 Июня 2013, 20:50:26 »
Yes it was to be honest. However there is something else i need help with.  Everything is working fine now but whenever i change channels i get this box in the middle of the screen saying "decode with mgcamd..." and its a little annoying. Can you please tell me how to turn it off? i have checked the settings in the menu but there isn't any option related to this on there. 
DM500S, mgcamd 1.35a, newcamd

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need help with setting up mgcamd.
« Ответ #14 : 24 Июня 2013, 21:06:01 »
if I take a look at your mg_cfg file change:
C: { 00 }
O: { 00 }
S: { 01 }
and as long as it is working
L: { 00 }
D: { 00 }
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

free2rhyme

  • Пользователь
  • **
  • Сообщений: 10
Re: Need help with setting up mgcamd.
« Ответ #15 : 24 Июня 2013, 21:18:46 »
What will  it do?
DM500S, mgcamd 1.35a, newcamd

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Need help with setting up mgcamd.
« Ответ #16 : 25 Июня 2013, 01:09:42 »
which value is in question ?
you see in your own mg_cfg in the lines starting with # the options to configure + the possible values you can use and the configured value
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP