Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion  (Прочитано 6661 раз)

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #20 : 24 Июня 2021, 11:54:32 »
Follow readme txt from CCcam 2.3.9 mips ;)
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

synckonto123

  • Пользователь
  • **
  • Сообщений: 13
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #21 : 07 Июля 2021, 11:22:24 »
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host                 | Connected  | Type    | Version| NodeID         | Cards | CAID/Idents                   |
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+
|xxx.xxx:xxx     |00d 00:01:16|CCcam-s2s|2.1.1   |xxxxxxxxxxxxxxx|     2 |                               |
|xxx.xxx:xxx  |00d 00:01:15|CCcam-s2s|2.1.1   |xxxxxxxxxxxxxxxxx|     2 |                               |
+----------------------+------------+---------+--------+----------------+-------+-------------------------------+

I have connection s2s ver 2.1.1
is it oK? I was expecting 2.3.9

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #22 : 07 Июля 2021, 14:04:09 »
connection s2s ver 2.1.1

I have no idea what is s2s. You were recommended to adjust OsCam for your DMOne receiver.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

synckonto123

  • Пользователь
  • **
  • Сообщений: 13
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #23 : 07 Июля 2021, 19:45:51 »
I'm testing on other receiver now - OCTAGON SF8008 with CCAM 2.3.9
No TVN so far but POLSAT channels work OK.
Stupid question - on which satellite is TVN ? still on HotBird? It looks that I don't have signal for HBO and TVN channel but all others works fine.
What is going on?

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

sat4us

  • Новичок
  • *
  • Сообщений: 8
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #25 : 22 Июля 2021, 20:19:22 »
SkyDe new encryption? Dark image here
Vuduo 4K + Vuduo² openatv 6.3 19.2/23.5/28.2/13.0/0.8

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

romaN237

  • Пользователь
  • **
  • Сообщений: 38
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #27 : 23 Июля 2021, 20:17:24 »
Have you adjusted anything? Currently all channels are working.

sat4us

  • Новичок
  • *
  • Сообщений: 8
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #28 : 24 Июля 2021, 00:44:49 »
Works again 8)
Vuduo 4K + Vuduo² openatv 6.3 19.2/23.5/28.2/13.0/0.8

synckonto123

  • Пользователь
  • **
  • Сообщений: 13
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #29 : 01 Августа 2021, 17:26:42 »
can I use OSCAM 1.2 with CCCAM 2.3.2 for NC+?
on my tuner (Dreambox one) only OSCAM is available

It works for me. The problem was related with my home infrastructure which has appeared at the same time as TVN coding change and I though that sharing is the issue but problem was related to TV signal.   

JuanCameron

  • Новичок
  • *
  • Сообщений: 3
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #30 : 24 Августа 2021, 08:10:43 »
 have blackhole 3.1.0 on my Vu+ and I'm using cccam 2.3.2 for Polsat package for years without any problem but recently some of them like "CANAL+ SPORT HD, CANAL+ SPORT 2 HD, CANAL+ PREMIUM HD, CANAL+1, Canal+ Family HD &..." cant be open anymore. so I uninstalled cccam 2.3.2 and then installed 2.3.9 version (ipk version) and then add my config lines to Cccam.cfg as usual. but now, the chanals are open even the chanas that didn't opened earlier. but all package have very bad freezing! every chanal! they are open for 5 or 8 second and then stop for 5 seconds and so on!

so I installed my 2.3.2 version again and everything is fine except that I don't have those chanals I mentioned earlier (CANAL+ SPORT HD, CANAL+ SPORT 2 HD and...) but others (elevens, hbo,...) are opened instantly with zero freeze!

Then I tried the 2.3.9 Mips version. the cccam binary file name in my /usr/bin was "CCcam.mips32el" so I stopped the cam and changed  "CCcam2.3.9.mips" to it and then i replaced, it but nothing changed! just like 2.3.2 I still cant open those five or six chanals but others are open and work fine!

I tried 2.3.8 ipk version too just like the 2.3.9 ipk, all chanals are open but with a severe freeze!

if someone please could tell me where is the problem?
Vu+ Solo Se, Cccam 2.3.9, Blackhole 3.1.0

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #31 : 24 Августа 2021, 08:18:14 »
if someone please could tell me where is the problem?

The problem is that there is no such user JuanCameron in the billing. We cannot recommend you anything because we cannot check your connections history.
Start from here: https://www.cardsharing.cc/index.php?topic=9566.0
After you complete your signature (with your valid login in the billing), we'll see what can be recommended to you.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

JuanCameron

  • Новичок
  • *
  • Сообщений: 3
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #32 : 24 Августа 2021, 09:07:07 »
if someone please could tell me where is the problem?

The problem is that there is no such user JuanCameron in the billing. We cannot recommend you anything because we cannot check your connections history.
Start from here: https://www.cardsharing.cc/index.php?topic=9566.0
After you complete your signature (with your valid login in the billing), we'll see what can be recommended to you.

thanks for reply, I'm pretty sure the problem has nothing to do with the server or cccam provider it must be a configuration that I missed somewhere, as I noticed there are some other users with the same problem in the previous page. unfortunately I hadn't bought my service from here,  so I just found cardsharing forum and I fascinated how good and up-to-date it is so I thought to give it a try here maybe someone could help with this problem sadly, it seems like I don't get any help from here. but you're doing a great job here. keep it up and thank you anyway...
 
Vu+ Solo Se, Cccam 2.3.9, Blackhole 3.1.0

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

MarianPaluch

  • Новичок
  • *
  • Сообщений: 2
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #34 : 09 Сентября 2021, 18:34:59 »
Witam. Czy pomoże mi ktoś zmienić ustawienia w Oscamie Zgemma H9.2S abym mógł oglądać kanały 4K? Pozostałe kanały działają bez problemu. Pakiet VIP Poland. Dzięki i pozdrowienia.

MarianPaluch

  • Новичок
  • *
  • Сообщений: 2
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #35 : 09 Сентября 2021, 18:45:55 »
Hello. Can someone help me change the settings on the Oscam Zgemma H9. 2S so I can watch 4K channels? The other channels work without any problem. VIP Poland Package. Thanks and regards.

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10006
  • Keep trying!
Re: CCcam 2.3.9 with NC+ (caid 0x1813), SkyDE, and LONG ECM support discussion
« Ответ #37 : 13 Сентября 2021, 12:34:23 »
Eleven Sports 1 4K (sid 0x070F) can be accessed from Polsat package.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic