Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: VU+ UNO 4k SE with VTI 13.0  (Прочитано 10434 раз)

simptrix

  • Пользователь
  • **
  • Сообщений: 10
VU+ UNO 4k SE with VTI 13.0
« : 07 Марта 2018, 18:56:09 »
Hello together,

i am a new member and have a VU+ Uno 4k SE with VTI 13.0 Image. Now I want to install the Oscam Softcam and test the Sky Deutschland HD 19E line. First I see that on the page the attention "Cardsharing test access is provided only to one Sky Cinema channel (cccam and newcamd protocol). So can i test the line with the Oscam softcam or should I install the cccam or camd protocoll? And second have you a guide for oscam softcam?

Thanks in advance.

Greeting
Simptrix



suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #1 : 07 Марта 2018, 19:05:10 »
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #2 : 07 Марта 2018, 19:23:54 »
Thank you, but in my subscription i get an message with "You have no subscription!"

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #3 : 08 Марта 2018, 01:05:45 »
CCcam is a name for a emulator software and a protocoll to transfer PayTV encoding information to a network server and also transfer decoding information back from server to the client as well. In addition the protocol newcamd is available from the server. By my knowledge Newcamd is only used for a protocol name, there is no emulator-Software called Newcamd (what makes it easier for understanding).
if you use the test subscription you can only decode ONE channel - as you wrote yourself "only to one Sky Cinema channel" (if you do not understand use Google translation. I have not tested it but I am sure it will be translated to German correctly) = you can only watch ONE channel with this test-subscription. I do not use "test subscription" but somehow this "ONLY ONE channel" you can watch/which is decoded by server is named somewhere ?!
Oscam is a multi-protocol emulator. It can be used for Newcamd- and CCcam-protocoll as well. (Newcamd is advised in use with Oscam !!!)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #4 : 08 Марта 2018, 11:26:27 »
Hello Jogi,

thank you for all the information. I understand the difference between CCcam/Newcamd protocoll and the Oscam emulator. I also understand that i can only decode one channel in the test subscription. That is ok because i will only test it with my system and then buy a ticket.
at the moment my problem is the installation and configuration of the Oscam emulator and the Newcamd protocoll. In the topic "Tips for OsCam users"
1. Use newcamd protocol for Oscam emulator (www.cardsharingserver.com --> My subscription --> Settings for newcamd protocol --> Settings for Oscam emulator
But in my subscription i get an message with "You have no subscription!"

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #5 : 08 Марта 2018, 11:36:41 »
This is a sample (template) for SkyDe channel, where you have to replace with the data taken from the test (server name, port, user login, password, etc)



[reader]
label       = "test"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = srv.com,port
user        = login
password    = paswd
group       = 1
audisabled  = 1
inactivitytimeout = 300
ident     = 098C:000000

VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #6 : 08 Марта 2018, 11:53:06 »
Thank you very much. I will test it in the evening.

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #7 : 08 Марта 2018, 23:11:10 »
Hello,

so i have install the oscam softcam and delete files. now i must copy and paste settings to oscam.server file.
The file looks:
[reader]
label         = SKY_DE_V1X
description      = V13 or V14 (NDS)
caid         = 09C4,098C
boxid         = 12345678
detect         = cd
emmcache      = 1,2,2
ins7e11         = 14
ndsversion      = 2
saveemm-u      = 1
saveemm-unknown      = 1
blockemm-unknown   = 1
blockemm-s      = 1
blockemm-g      = 1
blockemm-u      = 1
mhz         = 534
cardmhz         = 357
protocol      = internal
device         = /dev/sci0
group         = 1

But the information on free test line looks:
Host (IP address):    xx.xx.xx.xx
Port (newcamd):    41687
Login (newcamd):    9832453
Password (newcamd):    7748274
DES Key:    0102030405060708091011121314
For MgCamd emulator:
(file /var/keys/newcamd.list)    CWS = xx.xx.xx.xx 41687 9832453 7748274 01 02 03 04 05 06 07 08 09 10 11 12 13 14
For CCcam emulator:
(file /etc/CCcam.cfg)    N: xx.xx.xx.xx 41687 9832453 7748274 01 02 03 04 05 06 07 08 09 10 11 12 13 14
For Wicard emulator:
(file /etc/wicardd.conf or /etc/tuxbox/config/wicardd.conf)    [reader]
name = cardsharingserver.com_9832453
account = 9832453:7748274@xx.xx.xx.xx:41687
type = newcamd525
keepalive = 300
timeout = 5000
active = 1
debug = 1

So what i must change in the file?

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #8 : 09 Марта 2018, 00:53:17 »
I would believe the server also offers a config server-file for Oscam. However, it has to look like:
[reader]
label       = "test"
protocol    = newcamd
key         = 0102030405060708091011121314
device      = xx.xx.xx.xx,41...7
user        = 9832453
password    = 77....4
group       = 1
audisabled  = 1
inactivitytimeout = 300
caid      = 098C
ident     = 098C:000000

I do not write the whole port-number as this is not allowed (you should edit the post if this is the correct port-number and not only "an example". Same for username and password, never post your real password)
And I also expect, that the port-number is for Newcamd protocol. By default server shows CCcam protocol settings, to see Newcamd-protocol you need to click on the red text "Show settings for Newcamd protocol" below "My subscription" menu. Above the settings the text "Settings for Newcamd protocol:" is shown if you see the required Newcamd settings.
And simply remove the complete old reader of your setup, exspecially if you still have a card insert.

Make sure you have no additional settings that might interfere. Go in Oscam webmenu on Files and see if you have an oscam.dvbapi a oscam.services or oscam.whitelist. If you click on this items and see text: clear the box and click on SAVE to delete the files/old content (you might save the content via an editor on your PC or copy the files from your sat receiver first.
And caid and ident need to be correct for the pay tv package you subscribe. 098C is for Sky Germany. From your old settings I believe you have a test subscription for Sky Germany
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #9 : 09 Марта 2018, 10:05:55 »
When i get a test line for Sky Germany the server doesn't offers a config for Oscam, only for settings for cccam protocol and settings for newcamd protocol.

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #10 : 09 Марта 2018, 23:21:53 »
Can someone help me with my problem? I testing all test lines but noone give me a config for oscam so i can not test it with my system and can not buy a 1 month or 1 year ticket.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #11 : 10 Марта 2018, 10:47:47 »
I don't see any problem here. You are given various settings for different emulators and protocols: cccam and mgcamd. You cannot install neither of them? Why are you expecting from us the test settings for the emulator, which is not available among others? If you cannot do it by yourself, ask anybody who understands the subject. Settings for Oscam are available for full subscription only. The users testing our service (everybody!!!) are setting their boxes using available settings and nobody claimed up till now. If you expect something more from us, better don't waste your time and find some other server.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #12 : 10 Марта 2018, 11:39:09 »
In the VTI Image i can only install the oscam softcam, not more not less. And i exptectin from you because my friend has a ticket from your service too and is very satisfied. But i have found other side an test my system with a oscam config and it works. When you say, settings for oscam are available for subsription then i trust you and buy a ticket one month. I have written an email because of the terms of payment.

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #13 : 10 Марта 2018, 12:35:29 »
Did you read my signature? Is it a problem to install the image other than VTI?
I have VU+Zero. Mgcamd or cccam is not a problem to install via feed.
No need to trust me, you need to test everything yourself.
If you fail, you will blame ME in all your errors.
It is important that the user test everything himself.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #14 : 10 Марта 2018, 13:09:39 »
Yes i read your signature and no its no problem to install an other image but i really happy with this image. So when it works with an osman config and you have settings for oscam why i should install another image? And no i dont blame you in all my errors when i buy a ticket and it dont works because it is my fault to buy a ticket without testing the system with your config. But if you dont want me to buy a ticket i am looking for another provider.

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #15 : 10 Марта 2018, 13:13:40 »
OK, I was not aware that "Test-Users" get no Oscam settings shown. Is it allowed for Test-Users to use Oscam (I believe this is not the 1st new user who is setting up Oscam with a test-line)

As I already posted the required reader-parameters for Oscam it should work (if not blocked by server - suma might know that ?)
So if it's still not working provide the logfile from Oscam. And please the whole logfile from start uo not only 3 lines from the problem or something like that *g*
please remove/change servername or ip-adress and port within the logfile
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #16 : 10 Марта 2018, 13:43:07 »
You may buy 3-day subscription (only 1 USD) and test it by adjusting your Oscam, etc. If your test is successful, then you may extend your subscription.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

simptrix

  • Пользователь
  • **
  • Сообщений: 10
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #17 : 10 Марта 2018, 13:57:23 »
Yes, thats a good idea. i hope i can buy with paypal. therefore i have written an email.

Kaesse

  • Новичок
  • *
  • Сообщений: 9
Re: VU+ UNO 4k SE with VTI 13.0
« Ответ #18 : 13 Июля 2018, 13:44:42 »
Hi simptrox,

Did you solve your problems? I am struggling with VTi and Oscam too.

Thx
VU+ Uno 4K, VTI Image 13.0.9, Oscam 1.20, VIP Germany