Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: AB IPBox -910 var/keys/mg_cfg  (Прочитано 17155 раз)

xtruex

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #20 : 01 Мая 2009, 13:42:37 »
покажи файл mg_cfg
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

uzas

  • Старожил
  • ****
  • Сообщений: 210
  • Cuberevo 3000 HD PVR
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #21 : 01 Мая 2009, 14:20:18 »
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 }

# network ecm timeout in seconds
K: { 15 }

# newcamd dead routes connect retry, sec
Q: { 300 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 00 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 01 }192.168.0.2 514  /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 00 }

 

uzas

  • Старожил
  • ****
  • Сообщений: 210
  • Cuberevo 3000 HD PVR
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #22 : 01 Мая 2009, 15:14:17 »
 может сделать
К- 05
N- 01
только по серверу не будет бить.

xtruex

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #23 : 01 Мая 2009, 15:15:14 »
поставь
H: { 07 }
K: { 08 }
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

uzas

  • Старожил
  • ****
  • Сообщений: 210
  • Cuberevo 3000 HD PVR
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #24 : 01 Мая 2009, 15:55:26 »
если будет включена Н -07  то через сколько примерно забьеться вся памать ресивера.
нужно будет ее потом чистить или она автоматом чиститься.

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #25 : 01 Мая 2009, 16:06:59 »
Давайте вот тут почитаем- http://www.satavto.by/forum/forum46.html - там про эти ресиверы более подробно. Что толку гадать, если ни мы, ни тем более вы сами не знаете своего ресивера?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

xtruex

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: AB IPBox -910 var/keys/mg_cfg
« Ответ #26 : 01 Мая 2009, 16:12:27 »
можете не включать кэш
понаблюдайте за логом на каналах с длинными ключами  Премьера,Кинорейсы
как часто тюнер обращается к серверу ?
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test