Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Emulator Mgcamd 1.45c (MIPS and SH4) with SkyDe support  (Прочитано 52567 раз)

malone7

  • Пользователь
  • **
  • Сообщений: 13
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #60 : 21 Апреля 2019, 22:11:41 »
Hi,

So for Dreambox 500HD is the correct file:
"oscam-svn11516-mipsoe20-webif-dvbapi" ?

Regards, Bill
DM500 HD

ramboger

  • Новичок
  • *
  • Сообщений: 1
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #61 : 21 Апреля 2019, 23:17:45 »
i have a Coolstream Zee SAT, Will it survive and receive this new Emui version?

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #62 : 22 Апреля 2019, 05:16:09 »
most likely mips is for Dreambox processor (and other manufacturers using the same). No idea what oe20 is about, I assume at least something about Enigma 2. By my knowledge Dreambox500hd uses MIPS (obviously there are also Dreamboxes with ARM processors available, as there is a arm_dream version available in the package).
This is only the executable file itself, no installer, so simply replace the existing Oscam-executable with the new one (rename the oscam of this package to the oscam-filename on your STB) and make sure the attributes are set to 755 or higher rights (usually a file keeps his attributes if you overwrite it, what would require at least the same amount of free memory as the new file has). Perhaps make a copy of the existing oscam-file first to be able to switch back (on Enigma I know some start-scripts checking the version of the started application, so even if it could basically run with no harm to your receiver it will not work because the start script detect wrong version. No idea how to solve this - I mean: modify/update the start script of course *g*).

Oscam for CST included in the zip-file: version ...cool-webif... for old HD1 platform (like BSE, Neo, Neo² and Zee) and cool2-webif for HD2 platform (like Tank, Trinity, Zee² and Link). Basically you can say: CST-STB with flash-memory below 30MB is HD1 platform. If the box survive depends on your knowledge  ;D but the receiver will for sure not receive the new Oscam version as long as you >do not make it on your own<. Especially for HD1 platform: make sure you have enough free memory available.
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

telex

  • Старожил
  • ****
  • Сообщений: 261
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #63 : 22 Апреля 2019, 22:46:25 »
is there now a sh4 mgcam 1.45 version now?
Dreambox 7020 HD
Mgcam 1.35
68° east to 45° west 1,20m dish

Filsen

  • Новичок
  • *
  • Сообщений: 3
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #64 : 23 Апреля 2019, 21:34:32 »
Meine Sender sind alle hell, aber die Mgcamd 1.45c startet nach ein paar Sekunden immer wieder neu.

Gibt es eine Lösung?

Danke

fmarios2

  • Новичок
  • *
  • Сообщений: 4
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #65 : 24 Апреля 2019, 22:53:10 »
After many tries, I'm not sure what's wrong and I can't see any channel from SKY DE.
My receiver is Dreambox 8000HD.
First, I installed the Mgcamd1.38 and the settings from my subscription from this section:

"Settings for emulator Mgcamd 1.45 for Newcamd protocol.
You can download Mgcamd 1.45b for mips and sh4 with LONG ECM support (idents 060A00, 050C00) for newcamd protocol.
Configuration file - /var/keys/newcamd.list:..........."

I performed a check in another channel BBC Brit on 13' East (Hotbird), by having select the Mgcamd 1.38 as a cam on my receiver. The channel opened without a problem. I performed the same check on ORF1 HD, and the channel opened without a problem. The SKY SPORTS 1 or 2 HD (on 19.2') or any other channel on SKY DE are not working.

When I tried to erase from the folder /usr/bin the file mgcamd_1.38 (type 38 File) and put the new file mgcamd1.45c_mips (type 45C_MIPS File) by rename it first (to mgcamd_1.38)  then nothing is working.

I haven't installed the CCCAM on my receiver or the the CCCAM settings from my subscription.

Can someone tell me what's wrong. Is it possible someone to send me the correct file that I should put and replace the mgcamd_1.38? I'm attaching the mgcamd that I use in my receiver.

Thank you.

groder

  • Новичок
  • *
  • Сообщений: 3
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #66 : 25 Апреля 2019, 11:05:20 »
Всем Привет,
подскажите плз. есть ли возможность обновить Emulator Mgcamd 1.45c на Opticum x406p (EMU-update-soft_v1.09.12499), если да то как?

groder

  • Новичок
  • *
  • Сообщений: 3
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #67 : 26 Апреля 2019, 10:14:46 »
May be in Englisch,
my quastion is do I have to possibility update the Emulator Mgcamd 1.45 on my reciever Opticum x406p (EMU-update-soft_v1.09.12499). If yes, how, if no, do we have any altervative recievers, what I can you as well?

fmarios2

  • Новичок
  • *
  • Сообщений: 4
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #68 : 26 Апреля 2019, 12:16:45 »
update:
For the Dreambox 8000HD, I did the following and worked:
1. Download and install the image openpli-7.0-release-dm8000-20190422.zip from https://openpli.org/download/dreambox/DM8000
2. Download and install from blue panel the OSCAM emu.
3. Put the lines of my subscription to the oscam.server
4. Restart EMU and everything worked.


Meiner

  • Новичок
  • *
  • Сообщений: 1
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #69 : 26 Апреля 2019, 22:19:13 »
Hi @ all,

I use a edision argus pungulux with spark, so I have mgcamd.sh4 or oscamd.sh4.

Can I get a Plugin mgcamd v1.45c for sh4 or what can I do?

Please Help

Thank you

Edision argus pingulux / Spark
mgcamd.sh4

Bagwahn

  • Bag-Wahn
  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #70 : 27 Апреля 2019, 13:43:17 »
Hello,

does someone get the mgcamd1.45 to work with a Edision mini?

I tried a lot with my reciever Edision mini but without success.
Just a dark screen.
Before the change of Sky all runs proberly with CCcam

Has anybody any idea what went wrong with a Edision mini ?
I tried both emu, oscam , mgcamd , both protocols , newcam protocol
installed the latest ATV image




Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #71 : 27 Апреля 2019, 14:21:23 »
what do you expect here as answer from your description ?
I do not have that STB but Google results say MIPS receiver = at least possible to run the new Mgcamd from https://www.cardsharingserver.com/index.php?module=cccam
On the other hand it says beside MIPS also dual core processor = not really sure that a emulator build for MIPS will do
Basically the same question for Oscam: which version (compiled for what receiver/processor do you install ?

Was the emulator at least running ? (if you run the new emulator, do you see your account online on billing center > connection history ? (for Mgcamd the configuration files should be the same, only required change is the executable file, while Oscam need new files what gives many options for errors)
Have you tried to start emulator via Telnet ? that should give you some information if the emulator is able to start/run, especially if you type setconsole first to get log output to the Telnet window.
Are you able to access Oscam WebIF ? if so, what do you see unter Status and Live Log ??

The only answer with the given information is: try harder, it's possible *g*
several users switched to Oscam (cause no Mgcamd version for there STBs available, but this might not your problem, as there is a MIPS version of Mgcamd1.45c available)
Have you installed the emulator from the menu of your box (many Enigma versions name this "blue panel" = in this case the installed version is most likely compatible to your receiver)

And if you need to use Oscam: try to configure Newcamd protocoll as shown in the config file on Your subscriptions for Newcamd  + Oscam.
On this CS server Cccam-protocol often creates problems in combination with Oscam and once configured correctly it does not matter, both protocols do exactly the same = simply setup Oscam + Newcamd to avoid problems.
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Bagwahn

  • Bag-Wahn
  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #72 : 28 Апреля 2019, 11:35:01 »
OK. thanks for the info and sorrry for the less information about my problem.
i only want to hear if someone maybe has the same STB and with a successful test.   

i think i tried is allready very hard, but i will try even harder  8)  Don´t worry
i will now set my focus to the mgcamd1.45c , because now i got the info it should possible

I allready installed the mgcamd 1.38 over the blue panel
downloaded and installed it over the plugin download option 
overwrite the file with the version 1.45 from your server ( keep the old, original name ) , set the parameters from my account to the newcamd.list
I think i have done all what should be

but the connection history of my account says no connection at all
so i guess version 1.45 will not run 
a ping to your server works

i will test it within the next days by telnet and i inform you about my result.

Thanks for your answer

Bagwahn

  • Bag-Wahn
  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #73 : 28 Апреля 2019, 12:19:16 »
Ok.  i tried it now by telnet
got some message on the screen, no config file etc.
now i need your help  ,
emm started and stopped  :o
the newcamd.list is in the directory usr/keys

-------------------------------------------------------------
root@osmini:/usr/bin# mgcamd_1.38r1                      <---   my comment  <----- i renamed your file, that why i start the process called mgcamd_1.38r1
warning, no config file
Mgcamd v1.45c [ LONG ECM ] by mixvt (Apr 19 2019) for cardsharing.cc
[mg] Net:0:7:0:10s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:6 Log:2:no ip:28007 Reread:0
[mg] Ecm cache time: 15
Box type: mips dreambox (dm7025, dm800)
root@osmini:/usr/bin# Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[mgcam] emm thread started
got 63 cmd 9F
[mg0] namespace C00000 t-id 4 on-id 85
[mg0] descramble on 1, source 0
[mg0] service A index 0 pmt pid 60 (1), pids: video 0x00FF, audio  0x0100
[mg0] ECM: CaID: 0x09C4  -> CaPID: 0x1B42 ProvID: 000000
[mg0] ECM: CaID: 0x098C  -> CaPID: 0x1A42 ProvID: 000000
[mg0] ECM: CaID: 0x098D  -> CaPID: 0x1C42 ProvID: 000000
[mg0] pid 0x1B42 failed to decode.
[mg0] pid 0x1A42 failed to decode.
[mg0] pid 0x1C42 failed to decode.
[mgcamd] emm started
 EMM: CaID: 0x09C4  -> CaPID: 0x1008 ProvID: 000000
 EMM: CaID: 0x098C  -> CaPID: 0x1008 ProvID: 000000
 EMM: CaID: 0x098D  -> CaPID: 0x1008 ProvID: 000000
[mgcamd] emm stopped

Bagwahn

  • Bag-Wahn
  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #74 : 28 Апреля 2019, 12:25:20 »
sorry, once again me.
i turn my view to the TV and saw one standing picture on the TV of the channel SKYDE Cinema
so i guess the EMU works for a short second
 

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #75 : 28 Апреля 2019, 12:46:31 »
Hello,

does someone get the mgcamd1.45 to work with a Edision mini?

I tried a lot with my reciever Edision mini but without success.
Just a dark screen.
Before the change of Sky all runs proberly with CCcam

Has anybody any idea what went wrong with a Edision mini ?
I tried both emu, oscam , mgcamd , both protocols , newcam protocol
installed the latest ATV image

I think, you have to try other image
https://openpli.org/download/edision/OS+mini/
and go on trying with Oscam downloaded via Bluepanel
You see that there is no results with ATV image, try other one and still Oscam + Newcamd
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #76 : 28 Апреля 2019, 13:49:48 »
P.S. Add your login in the billing to your signature. There is no such user Bagwahn in the billing
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #77 : 28 Апреля 2019, 13:55:02 »
The Mgcamd version, this MIPs Mgcamd seems to run on your STB. Application works and also detects CAPIDs/CAIDs, that seems OK.

So you should see something on connection history in billing center
a problem (that might cuts your server connection): your are not allowed to send EMMs to the server. I am not really familiar with Mgcamd but it looks like your Mgcamd is processing EMMs (that data is not used for decoding, these are card updates - and users should not send such data!)
Your mg_cfg file has to include the parameter A: { 00 }  to disable updates/EMMs
and also G: { 01 } if you use Newcamd-protocol or G: { 32 } for CCcam protocol (that might be a good reason
a complete mg_cfg should look like
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32 cccamd netclient, card list saved as /tmp/cccamd.info
#    (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 360 3600

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 60 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } root root

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 127.0.0.1 514 /tmp/mgcamd.log  ### L: { 04 }...

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 08 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
I believe I have used that confog for this server already (Newcamd protocol, G = 01

If it's still not working: you should find mg****-files or something with ecm** in the tmp/temp Folder of your receiver - these are text files given more status informations
PS: if you have an ignore.list, replace.list, priority.list file in your config-folder: rename/remove them and try again (restart Mgcamd). These are also config-files (=text) reinstall this files only if you are sure you understand the meaning and that the configuration is correct. Basically this files are not needed (but could avoid successful decoding)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Bagwahn

  • Bag-Wahn
  • Новичок
  • *
  • Сообщений: 7
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #78 : 28 Апреля 2019, 18:16:26 »
@Suma

what should i exactly do ?

P.S. Add your login in the billing to your signature. There is no such user Bagwahn in the billing

Do you mean my user on the CS Server ?

my user begins with bag-wahn@....

placma

  • Новичок
  • *
  • Сообщений: 6
Re: Emulator Mgcamd 1.45c with SkyDe support
« Ответ #79 : 28 Апреля 2019, 18:32:34 »
Hi there, I am using Prismcube Ruby linux reciever, I backed up my current mgcamd file from usr/local/bin and then replaced it with downloaded mgcamd_1.45_mips. Unfortunately it caused that I was not able to decode any channel (not only sky.de, but not even Skylink or anything else that worked before), so I wanted to go back to my old mgcamd version that I backed up, I copy-pasted there this old backup and rebooted the system, unfortunately it still doesnt work and I cant decode any channel from any CAID. Can someone help me, please? Thank U!