Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Dreambox DM800HD & Pli Image Problems with emulator settings  (Прочитано 21125 раз)

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Dreambox DM800HD & Pli Image Problems with emulator settings
« : 14 Августа 2013, 18:17:38 »
Been struggling for 2 days now with settings for my dreambox and the subscription line provided to work with MgCamd. Have read just about  everything on this and other forums but all to no avail so can somebody please give ma a clue as to where I've screwed up? Using the most recent OpenPli 2.1 image in a genuine box and eventually managed to install MgCamd manually after several reflashes with different images - none of which helped. Before buying a subscription I used the free test a couple of times - which worked fine with Ccam but having no success when using Mgcamd, which for reasons I don't fully comprehend is not to be used with a subscription? Have played around with dreamboxes for several years using keys and the occasional subscription patch so not a complete noob - but no programming wizz kid either.

As far as I can see Mgcamd is now installed and running - I haven't uninstalled the Cccam installed in the image - is this a problem. I have replaced ignore.list, priority.list and replace.list as instructed but had no newcamd.list, and not sure where this has to go? Read the instructions to create one myself (using the link provided from this forum)but not sure I've fully understood this or know where to install if successful with my creation, using DCC? I did find a "newcamd.list" file in the /etc/tuxbox/config folderof the Pli image - is this the one to be modified or replaced with a revised version? I have currently tried to install this into the /usr/keys folder with ignore.list etc?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #1 : 14 Августа 2013, 18:38:39 »
1. I use Domica 9 image without any problem.
http://www.cardsharing.cc/index.php?topic=29725.0 follow the link, register, download and install it.
2. Blue button of your remote is responsible for EMU menu. Download and install mgcamd 1.35 via this menu including all config files.
3. Using DCC, find \usr\keys folder and modify only newcamd.list file. No need to add ignore or priority lists. DM is clever enough to open the encrypted channels without these lists. That's all.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #2 : 14 Августа 2013, 19:58:14 »
Thanks for your reply. Following your instructions and have registered on the domica site . have not yet managed to find a domica 9 image to download directly (only been able to find and download domica 8). Will this be good enough, and can I automatically update it direct from the box if successful? Whenever I click on links for the domica 9 image I either get redirected all over the place or told that the page is not accessible to me? If you have a working link for the domica 9 image I would be grateful as have reflashed numerous times over the past few days to get the box working and getting thoroughly fed up with the amount of time and effort - actually thinking of taking up golf things have got so damned frustrating!

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #3 : 14 Августа 2013, 20:36:45 »
If you have DM800 HD se - http://www.domica.biz/index.php?topic=11515.0
If DM800 HD - http://www.domica.biz/index.php?topic=11069.0
No downloads directly from the box, only from the site
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #4 : 15 Августа 2013, 15:07:28 »
1. I use Domica 9 image without any problem.
http://www.cardsharing.cc/index.php?topic=29725.0 follow the link, register, download and install it.
2. Blue button of your remote is responsible for EMU menu. Download and install mgcamd 1.35 via this menu including all config files.
3. Using DCC, find \usr\keys folder and modify only newcamd.list file. No need to add ignore or priority lists. DM is clever enough to open the encrypted channels without these lists. That's all.

Hello again, have now downloaded and installed the Domica 9 image from another site as none of the links provided worked for me?
However after following your instructions and downloading and installing mgcamd 1.35 via the blue button I have no files in the keys folder. Can you advise where to go from here as I am determined to get this working if at all possible and get some use from the package purchased?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #5 : 15 Августа 2013, 15:20:30 »
From here http://www.cardsharing.cc/index.php?topic=28085.0 download and unrar mgcamd_config_27022013.rar (at the bottom of the message- attachment). Unrar it and copy mg_cfg file to usr\keys\ folder.
In the same folder, create newcamd.list file (manually) assigning it with 755 chmod and copy CWS lines from the billing.
Restart emulator and watch TV.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #6 : 15 Августа 2013, 15:42:46 »
Thanks for the reply. I have downloaded and installed the mgcamd_config file and installed it OK. Does the manually created newcamd.list file only contain the CWS line from the billing and should the line provided begin as follows CWS=cs999x://hallberg:abcde77@serverX.cc:88888 - line altered for obvious reasons?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #7 : 15 Августа 2013, 16:19:14 »
http://www.cardsharing.cc/index.php?topic=15767.0

Typically, newcamd.list starts with
CWS_KEEPALIVE = 300
After this line, you add the line(s) given to you in the billing:
CWS...
CWS...
CWS...
line by line
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #8 : 15 Августа 2013, 16:54:02 »
http://www.cardsharing.cc/index.php?topic=15767.0

Typically, newcamd.list starts with
CWS_KEEPALIVE = 300
After this line, you add the line(s) given to you in the billing:
CWS...
CWS...
CWS...
line by line

Below is exactly what is in my created newcamd.list;

CWS_KEEPALIVE = 300
CWS=cs999x://login:password@serverNo..cc:12345

The "cs999x://login:password@serverNo..cc:12345" is the only line provided in the billing (altered for obvious reasons)

I have not altered in any way the mgcamd_config or other files download earlier today -should I have done, and if yes which ?

This is really doing my head in now - been at it for 3 days and have to wonder if it really has to be this difficult?

As mentioned earlier, I've used Cccam in the free tests conducted from your server, and from other sources in the past and never had anything like these problems. Am I totally missing something here - I'm not a complete numpty and am quite comfortable with DCC, transferring and editing files etc. but starting to seriously question if this is ever going to work?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #9 : 15 Августа 2013, 17:34:30 »
You will need only 2 files: newcamd.list with server name, port No., your login and password and mg_cfg file from the archive downloaded earlier. Read the Note here http://www.cardsharing.cc/index.php?topic=28088.0 and use B parameter in accordance with your receiver type. In your case, B must be 6.
If all the package you purchased is OK with these config files, no need to use the remaining ignore and priority lists.
As i said before, Dreambox is rather clever receiver and needs no these files.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #10 : 15 Августа 2013, 20:50:57 »
I have changed the B parameter as instructed - it is now as below in the mg_config file in the box;

L: { 06 } 172.16.1.1 28007 /tmp/mgcamd.log

Do I need to modify the IP address here and change it to the IP of my Dreambox?

The newcamd.list file has the 2 files as posted previously, that is the first line CWS_KEEPALIVE = 300

The second line exactly as  received, that is CWS=cs123x://hallberg:abcde12@serv5:12345 (File modified for posting purposes)

You mention server name and port No. - I have inserted it into my box exactly as above (without the mods for posting)

Still no joy? I am using mgcamd 1.35a,  is this correct? I do have the option of using newcs-1.67+mgcamd_1.35a if this is of any use?

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #11 : 15 Августа 2013, 21:38:59 »
You buy subscription for newcamd or camd3 protocol ?
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #12 : 15 Августа 2013, 21:46:38 »
I bought a subscription for newcamd as far as I am aware?

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #13 : 15 Августа 2013, 21:57:11 »
Copy lines for newcamd.list from "My subscription"
Example
CWS = serv1 12345 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #14 : 15 Августа 2013, 22:41:23 »
Copy lines for newcamd.list from "My subscription"
Example
CWS = serv1 12345 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv

Thanks for replying to my post but am confused by your example which looks very different to my subscription line? I appreciate that my line can't be posted exactly and have modified it in my earlier posts for obvious reasons.

This has been posted earlier as ; CWS=cs123x://hallberg:abcde12@serv5:12345

Have I received an incorrect format, and are you instructing me to use a different format for whatever reason?

Using my (modified) line as posted earlier how should it look if I follow your instructions - as follows?

CWS = serv5 12345 hallberg abcde12 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv

xtruex

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 5010
  • DM 500HD OpenPli 4
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #15 : 15 Августа 2013, 22:49:34 »
I do not understand, why you can not make copies from "My subscription" sections

For newcamd
CWS = serv5 12345 hallberg abcde12 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
ICQ:290344
Бесплатный тест
http://www.cardsharingserver.com/index.php?module=test

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #16 : 15 Августа 2013, 23:03:38 »
I don't understand why I can't make a copy either - and I've been at it for 3 days now and have tried everything suggested by those more knowledgeable than me with this setup? I'll have another go later and see what happens - best have a break before I throw it at the wall?

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #17 : 16 Августа 2013, 05:30:38 »
CWS=cs123x://hallberg:abcde12@serv5:12345

Seems that you are trying to use camd3 settings instead of mgcamd settings.
You were given an example of CWS line, not camd3 line.
Look here and copy CWS line to your newcamd.list




If you fail this time...Well......ask anybody else of your surrounding to read thoroughly what is recommended and make everything according to the instructions.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #18 : 16 Августа 2013, 06:48:18 »
This has been posted earlier as ; CWS=cs123x://hallberg:abcde12@serv5:12345
Have I received an incorrect format, and are you instructing me to use a different format for whatever reason?
Using my (modified) line as posted earlier how should it look if I follow your instructions - as follows?
CWS = serv5 12345 hallberg abcde12 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv

I think, this is a great difference between
CWS=cs123x://hallberg:abcde12@serv5:12345
and
CWS = serv5 12345 hallberg abcde12 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv

Don't you feel the difference?


I have changed the B parameter as instructed - it is now as below in the mg_config file in the box;
L: { 06 } 172.16.1.1 28007 /tmp/mgcamd.log
Do I need to modify the IP address here and change it to the IP of my Dreambox?

YES
http://www.cardsharing.cc/index.php?topic=26069.msg69660#msg69660


The newcamd.list file has the 2 files as posted previously, that is the first line CWS_KEEPALIVE = 300
The second line exactly as  received, that is CWS=cs123x://hallberg:abcde12@serv5:12345 (File modified for posting purposes)

Exactly as received? Received where? If you selected newcamd protocol in the billing when making subscription, you need to use mgcamd emulator. The line you show here is for camd3, not for newcamd (mgcamd).

You mention server name and port No. - I have inserted it into my box exactly as above (without the mods for posting)

CWS = serverX 12345 hallberg abcde 12 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
You were provided with the line as example that can be modified according to your personall data from the billing.
You ignore this line and continue using the line which is intended for camd3 protocol (emulator). Are you still surprized why your subscription does not work?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

hallberg

  • Пользователь
  • **
  • Сообщений: 10
Re: Dreambox DM800HD & Pli Image Problems with emulator settings
« Ответ #19 : 16 Августа 2013, 10:36:09 »
 :)Finally got it to work after changing the subscription line to your instructions.

Thanks to all for your patience and help - much appreciated and looking forward to enjoying my subscription