Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: Seznam.cz HD  (Прочитано 3218 раз)

flukes

  • Пользователь
  • **
  • Сообщений: 10
Seznam.cz HD
« : 10 Января 2018, 19:01:58 »
Irdeto (CAID 0624) a Viaccess Orca (0500/051910)

He will work?
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

nopez

  • Пользователь
  • **
  • Сообщений: 19
Re: Seznam.cz HD
« Ответ #1 : 10 Января 2018, 20:20:54 »
It doesn't work right now, only channel with pure Irdeto encryption that works is C-music. I hope we won't be in dark for too long if Skylink decides to switch all channels to this encryption  :-X
Dreambox DM525, Newnigma2 daily image, OSCam: 1.20 - r.11432, VIP Czech

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #2 : 26 Января 2018, 22:08:32 »
The competition The TV Seznam works when it will work here ??
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

nopez

  • Пользователь
  • **
  • Сообщений: 19
Re: Seznam.cz HD
« Ответ #3 : 26 Января 2018, 22:52:33 »
It already works here like for 2 weeks. Same with IconcertsHD, no problem.
Dreambox DM525, Newnigma2 daily image, OSCam: 1.20 - r.11432, VIP Czech

otava5

  • Пользователь
  • **
  • Сообщений: 47
Re: Seznam.cz HD
« Ответ #4 : 26 Января 2018, 22:59:42 »
does not work with me ... IConcertsHD and CMusic it works
Dreambox 525 HD; OpenATV 6.1; VIP Czech; CCcam 2.3.0

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #5 : 27 Января 2018, 10:37:27 »
I have VU Zero, why does not seznam TV work?
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9201
  • Keep trying!
Re: Seznam.cz HD
« Ответ #6 : 27 Января 2018, 13:15:37 »
If it works for nopez, check you settings, internet connection, guys. It can't be so that the channels are working only for one user.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #7 : 27 Января 2018, 13:30:27 »
Check you settings, internet connection? Are not you crazy? i-concert and C music WORKS!
Nopez laughs
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Seznam.cz HD
« Ответ #8 : 27 Января 2018, 13:37:18 »
well, what exactly you mean by "settings"? I would say our "setting" is probably partly correct as 99% of channels are working fine. In my case, C-Music + iConcerts decodes just about 5 or 10s then it stops. Seznam doesn't decode at all. The rest of Skylink channels working ok. I pasted here the mgcamd log a week ago so that real troubleshooting can be done, but I was banned. I am also willing to post my mg.cfg. Is anybody willing to help or just say "check your settings" which doesn't help at all.
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9201
  • Keep trying!
Re: Seznam.cz HD
« Ответ #9 : 27 Января 2018, 13:50:05 »
well, what exactly you mean by "settings"? I would say our "setting" is probably partly correct as 99% of channels are working fine. In my case, C-Music + iConcerts decodes just about 5 or 10s then it stops. Seznam doesn't decode at all. The rest of Skylink channels working ok. I pasted here the mgcamd log a week ago so that real troubleshooting can be done, but I was banned. I am also willing to post my mg.cfg. Is anybody willing to help or just say "check your settings" which doesn't help at all.

Have you read my signature? I am not going to ask EVERYBODY to complete his signature, to show log-file, to describe his receiver, etc.
You are ignoring my requests, I will ignore yours.
Have a nice day
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9201
  • Keep trying!
Re: Seznam.cz HD
« Ответ #10 : 27 Января 2018, 13:59:18 »
Just pay attention to the following in this thread:

nopez signature: Dreambox DM525, Newnigma2 daily image, CCcam 2.3.0, VIP Czech
flukes signature: sucks
sly signature: sucks
otava5 signature: Dreambox 525 HD; SKYLINK HD package; CCcam 2.3.0

nopez wrore:
It already works here like for 2 weeks. Same with IconcertsHD, no problem.
It is enough for me to trust him, as he completed his signature specifying all necessary information. No need to ask a log-file, everything works for him.
What will you say?

By "your settings" I mean:
1. firmware (image)
2. mg_cfg settings
3. cccam settings.
By "internet connection" I mean to check the route and tracert to the server. Some internet providers have not so good connection to the server if you add server name to the receiver settings (e.g. server ABC. com). Sometimes, it is better to add server IP address instead of the server name (domain name), e.g. 123.234.345.11
Some internet providers have a bad route to our server. To check this, you will need a special utility called Win MTR. You will see whether the route to our server is broken or not.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #11 : 27 Января 2018, 14:19:07 »
It works everything but TV Seznam not.
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Seznam.cz HD
« Ответ #12 : 27 Января 2018, 14:19:53 »
Suma> ok, I admit I wasn't aware this is the condition for help. Now I've hopefully got all needed info in my signature. I am ready to answer all other needed info + provide mgcamd log but before I do it, I would like to be advised what part of the log or CAM configuration to provide just to avoid another ban. My assumption is, no hostnames/IPs, credential and other confidential info, right?
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Seznam.cz HD
« Ответ #13 : 27 Января 2018, 14:38:51 »
I have replaced hostnames with IPs but this doesn't help. I also tried traceroute and it stops on 8th hop but is this really a proof as other channel decodes well..
Here's my mg_cfg

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 03 }

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 }

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 }

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 03 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 03 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dm7025, dm800
# 07 itgate
# 11 sh4 enigma
B: { 11 }
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #14 : 27 Января 2018, 14:39:00 »
Rewriting to IP did not change anything.

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32 cccamd netclient, card list saved as /tmp/cccamd.info
#    (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 08 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9201
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 9201
  • Keep trying!
Re: Seznam.cz HD
« Ответ #16 : 27 Января 2018, 15:04:42 »
One more question to all of you - which protocol is used for sharing? I see, you are using Cccam emulator, but which protocol (newcamd or cccam?)?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

flukes

  • Пользователь
  • **
  • Сообщений: 10
Re: Seznam.cz HD
« Ответ #17 : 27 Января 2018, 15:11:17 »
I'm using newcamd

The mgcamd_configs_16.10.2013_2.zip setup did not help
VU+ Zero, Open ATV 6.1 Mgcamd 1.38 or CCcam 2.3.0 Skylink CZ

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Seznam.cz HD
« Ответ #18 : 27 Января 2018, 15:20:55 »
Will check the links later on - compare config and expected log output - and feed back my findings. Yes, I am also using newcamd.
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ

sly

  • Пользователь
  • **
  • Сообщений: 14
Re: Seznam.cz HD
« Ответ #19 : 27 Января 2018, 18:31:03 »
Suma> thank you for suggestions. I downloaded preconfigured files from the above link. I had to adjust windows end of lines as they somehow got there after downloading files, but that's not a problem. after adjusting correct box type, substituting hostnames with IPs I still got the same issue. Seznam TV, Insight HD doesn't decode at all, C-Music and iConcerts stop after while. Rest of channels work ok - receiving cw0, cw1 from server. When changing channel to Seznam TV is says:

[mg0] newcamd route X.X.X.X:<port#> cant decode

on C-Music, after screen freezes I receive timeout
[mg0] irdeto using chid 0000 version 41
[mgcam] read error error 110: Connection timed out
Fortis hs7919/Skytec Nerine, Enigma 2 TechNet (based on OpenATV), Oscam 1.2, Skylink CZ