Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: ignore ,priority list needed for mgcamd 1.35  (Прочитано 14996 раз)

boxer29

  • Пользователь
  • **
  • Сообщений: 27
ignore ,priority list needed for mgcamd 1.35
« : 26 Января 2014, 18:04:01 »
ignore and priority lists are empty in suma moderator signature ,can you plaes add the files thanks
SKYBOX F3 HD
Mgcamd 1.35
Sky uk hd+ viewAsia pack

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #1 : 26 Января 2014, 18:35:56 »
Ignore list is empty except for priority.list. For consistency, use both files (one of them being empty).
It must be so.
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

boxer29

  • Пользователь
  • **
  • Сообщений: 27
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #2 : 26 Января 2014, 19:15:49 »
ignore list and replace list are empty ,should i put them in the ETC folder in my duo ,
SKYBOX F3 HD
Mgcamd 1.35
Sky uk hd+ viewAsia pack

boxer29

  • Пользователь
  • **
  • Сообщений: 27
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #3 : 26 Января 2014, 19:23:28 »
in the mg_cfg file in the line box type

B should i need to set it to 06  or what ,im using a vu+duo box with

my mgcamd 1.35a stops after i change the channels when it is set to auto start
SKYBOX F3 HD
Mgcamd 1.35
Sky uk hd+ viewAsia pack

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #4 : 26 Января 2014, 19:34:14 »
mg_cfg is not used in skyboxes
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #6 : 26 Января 2014, 19:39:09 »
in the mg_cfg file in the line box type

B should i need to set it to 06  or what ,im using a vu+duo box with

my mgcamd 1.35a stops after i change the channels when it is set to auto start

Have you read https://www.cardsharing.cc/index.php?board=53.0 ?
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

boxer29

  • Пользователь
  • **
  • Сообщений: 27
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #7 : 26 Января 2014, 21:07:01 »
yes i have read all the thread
there are five files in the etc folder of my vu duo
1-mg_cfg   which is taken from your signature
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32   cccamd netclient, card list saved as /tmp/cccamd.info
#       (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 360 3600

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 02 } root password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 31 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

2-newcamd.list   contains my CWS file generated by you
and i have changed the
3-ignore list  ---empty
4-replace list   ---empty
5-priority list
 V: { 04 06 00 }
V: { 04 28 00 }
X: { 06 02 }
X: { 06 52 }
X: { 09 63 }
X: { 4A E1 }
X: { 0D 96 }
X: { 18 33 }

i did put the old ignore list ,replace list and the priority list  in the etc folder ,then had to change them back to what you said to keep them empty by ftp into the box and deleting the old files and replacing them with these files .
what am i doing wrong
is the mgcamd 1.35a corrupt
can you point me to a good working mgcamd 1.35a
thanks
SKYBOX F3 HD
Mgcamd 1.35
Sky uk hd+ viewAsia pack

suma

  • Главный помощник Moderatora
  • Ветеран
  • ****
  • Сообщений: 10091
  • Keep trying!
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #8 : 27 Января 2014, 05:42:28 »
OK, it's good, but it is not sufficient just to replace the files.
You have to attribute 755 to all of them. Have you done this? I think, no. Read the follwing topics. Until you do all these, none of the emulator will work properly.
https://www.cardsharing.cc/index.php?topic=15767.msg34319#msg34319
https://www.cardsharing.cc/index.php?topic=23717.0

VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

gessi2000

  • Новичок
  • *
  • Сообщений: 1
Re: ignore ,priority list needed for mgcamd 1.35
« Ответ #9 : 23 Июля 2014, 18:52:57 »
You must use
B: { 06 }
For VTI based Vuplus boxes otherwise the mgcamd (here using mgcamd 1.35 on VTI 7.0) will crash all the time and you have to reboot the box or restart the Emu all the time.

This setting obviously is needed from certain VTI>4.x revision which are based on a new kernel which crashed the Emu...