Вход в биллинг - Billing entrance - www.CardsharingServer.com

English forum section

Автор Тема: VIP Germany and Mgcamd. Help!!!  (Прочитано 11130 раз)

xOnFire23x

  • Новичок
  • *
  • Сообщений: 8
VIP Germany and Mgcamd. Help!!!
« : 26 Ноября 2012, 01:04:37 »
Hello!

First some information:

Receiver: VU+ SOLO, VTI Image V4.1
EMU: Mgcamd 1.35 (Download and install from VTI-Panel)
Config: http://www.cardsharing.cc/index.php?topic=28616.0

Server-Package: VIP Germany

My problem:

If i start the Receiver first only SkyDe are open. If I switch for example to one Viasat Baltic channel, i have to go i my cam center and make a restart of my mgcamd 1.35. If i switch than to an other Viasat channel, i have again make a restart of my mgcamd 1.35. And If i switch than back to SkyDe, i have to make again a restart.

All in all i want to say, that i have many times to restart my mgcamd. And the problem is, that is not alowd, form the server rules!

I hope some one can help me!!

Answer in enlish, german or russian ( in english letters please :D, if possible)

mkm

  • Гость
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #1 : 26 Ноября 2012, 03:55:31 »
00 autodetect function doesnt work in 3.1.1 kernels.
Open your mg_cfg file and edit b parameter to 6.

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

xOnFire23x

  • Новичок
  • *
  • Сообщений: 8
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #2 : 26 Ноября 2012, 20:00:41 »
Thanks! Now it works!


Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #3 : 02 Января 2013, 22:53:34 »
Hi Hi,

First some information:

Receiver: Dreambox 800Hd se
EMU: Mgcamd 1.38 or Mgcamd 1.35a
Config: http://www.cardsharing.cc/index.php?topic=28616.0

Server-Package: VIP Germany

i have the same problem. I have changed the config but the problem is still the there.
Are you have any ideas?

Greets Marius
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

wolleman

  • Пользователь
  • **
  • Сообщений: 24
  • dreambox 820
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #4 : 03 Января 2013, 02:00:43 »
mg_cfg
M: { 00 }
C: { 01 }
A: { 00 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 10
K: { 02 }
Q: { 600 }
P: { 00 }
O: { 00 } root dreambox
S: { 02 } 80
L: { 01 } 192.168.178.24 514
E: { 15 }
H: { 00 }
R: { 00 }
B: { 06 }
F: { 00 }
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #5 : 04 Января 2013, 03:05:49 »
Thank you now it works.

But the problem is already there but not so bad.
now it takes 30sec or a minute until i see something, sometimes. Earlier i have to restart the emu at this moment. Maybe you have any ideas for this problem?

Greets
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

loddi

  • Пользователь
  • **
  • Сообщений: 44
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #6 : 04 Января 2013, 12:13:55 »
I think to set
K: { 02 }
is dangerous. You will face a ban, if you set this! Please use a value of 7 instead.

Regarding your long times between switching a channel. Normally this is caused by wrong settings in the priority.list and ignore.list. Which ones are you using? On which channel you have this problems? Is it possible that you make a log of this?
Formuler F1, Oscam

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #7 : 04 Января 2013, 20:46:55 »
Okay. I had set K to 7.
Vh1 both channels. Since I have changed the config file, I can't watch these channels?
What i mean is. At this moment when I had to restart the emu earlier, I have wait now 20-30 seconds to see something. it's difficult to explain for me, because German is my mother launguage.

Greets
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #8 : 04 Января 2013, 21:30:56 »
because VH1 is available via keyfile (and also some other MTVs, ORF and AustriaSat channels): do you have files like AutoRoll.Key or SoftCam.Key in your Mgcamd config folder ?
Mgcamd should work fine with the config files mg_cfg, newcamd.list, priority.list and ignore.list (not sure if VIP Germany mght require the replace.list for some channels, but if the problem remain I would also rename the replace.list if you have that file - and restart Mgcamd of course)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

suma

  • Модератор
  • Ветеран
  • *****
  • Сообщений: 10091
  • Keep trying!
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #9 : 04 Января 2013, 21:32:47 »
If you use MgCamd emulator, never use
files like AutoRoll.Key or SoftCam.Key in your Mgcamd config folder

Delete them all, if any! and restart your emulator. Also, try MgCamd without priority.list and ignore.list
VU+Zero. 13E, 82.5E, 56E, Vip All, OpenPLI 6.0 image, OSCam: 1.20-unstable_svn. ALL POSTS WITHOUT SIGNATURE AND LOG-FILE will be ignored and deleted!1.mg_cfg here http://www.cardsharing.cc/index.php?topic=23717.msg58140#msg58140
2. ignore-priority.lists here http://www.cardsharing.cc/index.php?topic

wolleman

  • Пользователь
  • **
  • Сообщений: 24
  • dreambox 820
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #10 : 04 Января 2013, 21:34:40 »
ich hab schon viele sachen ausprobiert und min meine einstellung bin ich jetzt sehr zufriden. es gubt tage wo es nur einmal pro tag (wenn überhaupt) für 1 sec stehen bleibt. natürlich müssen die andere einstellungen auch passen
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #11 : 04 Января 2013, 23:50:43 »
Delete them all
yes sorry, I should have add this detail to my posting :-)) but thats what I meant, of course
On the other hand: I could also post an Oscam or Mgcamd compatible SoftCam.Key-file for the mentioned channels (including also Dorcel and Hustler *g*)
if you use a keyfile decoding start a little bid earlier and switching channels is not restricted to wait for 7-8 seconds and will releave the work of the server
but on the other hand, if the key changes and even if you have a "valid" subscription for the channels here, you need to update the keyfiles manually or remove them to get the channels decoded again from the server (otherwise Mgcamd will keep using the old/wrong key and picture remain black)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #12 : 05 Января 2013, 00:03:22 »
@wolleman: Bekommst du VH1 hell? also vor der änderung der mg_config war es hell.
und Dorcel and Hustler bekomm ich auch net Hell? Komisch


Цитировать
do you have files like AutoRoll.Key or SoftCam.Key in your Mgcamd config folder ?

Yes I have these files. And the Austria Channels are working. And some MTV channels too. But Hustler TV, Dorcel, VH1(both) aren't open to view. I am Confused.
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

wolleman

  • Пользователь
  • **
  • Сообщений: 24
  • dreambox 820
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #13 : 05 Января 2013, 00:08:13 »
sorry. auf die sender hab ich nicht geachtet. da sind doch noch welche in hd oder?
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #14 : 05 Января 2013, 00:20:59 »
Wie meinst? ORF 1HD etc.?
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #15 : 05 Января 2013, 00:29:47 »
I think I already got a complain from admin to write english as I simply forgot it *g* but this is no german forum and others might be interested as well:
try the SoftCam.key-file from my attachment (should decode all ORF/AustriaSat, Dorcel, Hustler and the available MTVs on CAID 0D05, Planet is only available from 6:00 to ~22:00 cet)
and for Dreamboxes try the included mg_cfg (B=06), if it is not working change it to B=00 (= auto-detect the used receiver)
if not working remove the AutoRoll.Key-file (if available) and perhaps also the priority-, replace- and ignore.list
the ORF channels are also available in HD but addtional channels like Puls4HD or RTL/Sat1/Pro7-Austria-HD are not available, even not with a ORF/A.Sat-subscription from this server, but via HD+ Germany (no Puls4 of course as it is an exclusive Austria channel)
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #16 : 05 Января 2013, 00:41:07 »
Yeah sorry for the German words.

Now Hustler Tv is working   ;). And VH1 is working but VH1 classics isn't working. I have changed the SoftCam.Key. But the config i hadn't change until now.
Normally VH1 classic must work also. i am confused :-)
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

wolleman

  • Пользователь
  • **
  • Сообщений: 24
  • dreambox 820
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #17 : 05 Января 2013, 00:55:33 »
ORF 1 HD und ORF 2HD ohne probleme
Dreambox 820,  CCcam 2.3.0, VIP Germany !!

Future8

  • Пользователь
  • **
  • Сообщений: 18
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #18 : 05 Января 2013, 01:09:48 »
I have also no problems with ORF1 ORF2.
Habe keine Probleme mit ORF
DM800HD se
Mgcamd 1.38 and ccam 2.3.0

Jogi

  • Старожил
  • ****
  • Сообщений: 445
Re: VIP Germany and Mgcamd. Help!!!
« Ответ #19 : 05 Января 2013, 03:20:47 »
I never mentioned VH1classic, the channel is nor working for me either *g*
but to be honest I thouhgt the channel would work via the included Viasat-Keys. I am using Oscam for CS-connection, local card and emu-keyfile/SoftCam.Key and Oscam requires to create a own cardreader/server for any used caid etc - but VH1classic was not that importend to me that I have made the neccessary changes.
I have MTV Germany and MTV-HD from the cs-server/SkyDeutschland and MTV-Music24/Hits/Dance/Rocks and VH1 via AustriaSat keyfile - fine/enough for me *g*
AX-HD51 STB using NeutrinoHD and Oscam with VIP-Astra. Dual login on server_81 via Cable-ISP