Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Configs => Тема начата: sjbmw от 03 Октября 2013, 22:23:21
-
i cant get my free trial working with mgcamd. i using vu+ solo2 with vix 3.0. using mgcamd 1.35a and have the files in correct place....i get this on 3CSyslog.....thanks in advance...
-
Incorrect newcamd.list
Why mgcamd connect to your local IP ?
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:xxxxx failed (63158ms)
-
Not sure ....heres my newcamd.list info.....
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = serv5 49530 025**** 861**** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Also my local ip 192.168.0.......not 192.168.1......
-
Also my local ip 192.168.0.......not 192.168.1......
You have to check whether your receiver can connect to internet.
It must connect OUR IP, not your local one.
From the log, it is clear that you have no internet connection in your receiver.
-
I'm definitely connected to internet as I can download/stream etc....for some reason it keeps trying to connect to a unrecognised ip...a example below....
Oct 03 18:50:26 192.168.0.10 [mg0] namespace 11A0000 t-id 7D9 on-id 2
Oct 03 18:50:26 192.168.0.10 [mg0] descramble on 1, source 0
Oct 03 18:50:26 192.168.0.10 [mg0] service 183F index 0 pmt pid 113 (1), pids: video 0x0919, audio 0x091A 0x091B 0x091C
Oct 03 18:50:26 192.168.0.10 CaPID: 0x0506 ProvID: 000000
Oct 03 18:50:26 192.168.0.10 [mg0] network can't decode
Oct 03 18:50:26 192.168.0.10 [mg0] pid 0x0506 failed to decode.
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.1:20000 failed (63157ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20000 failed (63158ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20001 failed (63158ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to serv5:49530 failed (63144ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20002 failed (63160ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20003 failed (63160ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20004 failed (63161ms)
Oct 03 18:51:28 192.168.0.10 [newcamd] Connection to 192.168.1.2:20005 failed (63161ms)
Oct 03 18:52:27 192.168.0.10 [newcamd] Connecting to 192.168.1.1:20000...
Oct 03 18:52:27 192.168.0.10 [newcamd] Connecting to 192.168.1.2:20000...
-
Usually, 192.168.1.1, 192.168.1.2 etc - are the local IPs - either your PC, or modem.
-
Edit mg_cfg file, B parameter should look like this:
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
-
In newcamd.list, only this information shall be added:
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = serv5 49530 025**** 861**** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Delete all the remaining info, if any.
Restart emulator and try again.
-
Also my local ip 192.168.0.......not 192.168.1......
I also recommend you to check, what is this IP and where it is assigned to? I am sure, it is your local IP
-
Please also keep in mind that only one channel is available for free test. When your test is finished, you may take one more test, etc etc.
the number of tests is not limited.
regards
-
The newcamd.list and mgcamd is all correct as you state. I now have a new free trial and changed mgcamd for a different version...I have uploaded the new file but it still don't clear....thank-you...
-
Which channel and from which satellite are you trying to open?
What is the mgcamd version now? The thing is, that only 1.35(a) is recommended
-
the trial is for Disc. History s uk... using version 1.38....its the only one i could find on the download server but i could find the recommended one if you think its the cause of my problem....
-
Please read the thread re: VU+ receivers http://www.cardsharing.cc/index.php?board=53.0
maybe you will find appropriate solution
-
thank-you for your help...i have installed mgcamd 1.35a...still no luck...i think this is a different problem and i am sure i have not made any silly mistakes....maybe an image change may solve it....i am going to try an amiko alien 2 to see if i get same fault maybe over the weekend....
-
Tried the Amiko Alien 2 but still had same issue. Then connected the box using WIFI dongle to mobile phone. All working fine through mobile connection so I guess my ISP is blocking certain ports. Does anyone know how to get around the port blocking???