Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Configs => Тема начата: tetam от 15 Августа 2017, 17:12:54
-
Hi, yesterday I got many violations, but I dont know why.
First i change the image from openatv to hdfreaks on my Xtrend ET 10000 receiver.
After many 62 Violations i deactivated instantly my CCcam.cfg and restarted the receiver with the openATV Image now I got 60 more violations. But I dont know why. The Only Emulator i have is the cccam 2.3. The IP doesnt change and no one other has my login credits. I hope you can help me, because I do not whant get banned.
For information I have a dual account.
Sorry for my worse english
regards
tetam
-
Try newcamd protocol and MgCamd emulator.
-
Hi,
I´m sorry, but I´m very unexperienced. At the moment I deinstalled cccam and installed MgCamd 1.38. No, how do I use Newcamd Protokoll on MGCamd Emulator?
-
I followed this Post
https://www.cardsharing.cc/index.php?topic=28088.0 (https://www.cardsharing.cc/index.php?topic=28088.0)
is that all I should do?
-
Now I installed MGcamd 1.35a because I dont know how to install 1.45b. Its not a ipk. Downloaded the Config Files:
replace.list, ignore.list, mg_cfg, etc.
But my screen is black and sky wouldnt get light.
-
It is not sufficient just to download and install MgCamd. You need to go to the billing (www.cardsharingserver.com) and find settings for MgCamd emulator (newcamd protocol). There are 2 settings for MgCamd: for newcamd and for cccam protocols. You need to select settings for newcamd protocol.
Then, copy your settings and paste them to newcamd.list
Typically, replace.list and ignore.list are empty. You may delete them at all.
Restart emulator and try again
-
Yeah, thank you for answer. I installed MGcamd 1.35, 1.38 and 1.45b then i downloaded the files I said. After this i modified the newcamd.list with the cws line form my "My Suscription" site and rebooted the receiver. After reboot i looked into softcam Info panel and saw that the receiver was connected with the CS-Server, but my screen was still black. I dont know what I can do else
-
OK. No I solved the problem. I forgot to set Receiver in the mg_cfg. After reading this thread
https://www.cardsharing.cc/index.php?topic=30684.msg93515#msg93515 (https://www.cardsharing.cc/index.php?topic=30684.msg93515#msg93515) i set de {B} option to 6 and it worked.
thanks for your help
-
Now I got a further Problem. I tried different Images with same configs. I tried Mgcamd 1.38r1 and 1.35a.
On both I get random freezes once are several seconds and once I have to restart Softcam. It only happens on decrypted Shows.
After restart of cam it works for minutes normal till the next lag.
Can I do something to fix it.
-
Only one emulator shall be installed in receiver and be run at a time. If you use MgCamd 1.35a, which is recommended, use it further. Uninstall all other emu. Play with mg_cfg file settings. Also, try various firmware (images).
Study https://www.cardsharing.cc/index.php?board=100.0
One question - did you take a free test before purchasing full subscription?
The thing is that many users never had a free test. They purchase subscription, without reading a forum. Then, a lot of questions arise. I think, you are among them.
My advise - read the forum, take a free test and experiment with your receiver as long as you want until you get completely positive result.
P.S. Read FAQ and complete your signature.
-
I use the line almost 2 years and this is the first time i had problems. I always use only one emu. But now i´ll trie the cfg file thing.
-
What are you trying to watch? Which channels and which satellite?
Can you provide a log-file?
-
Looking through yout statistics for today, the number of requests sent by your receiver (mgcamd) to the server - 3 and NO violations.
So...
-
Hi,
The violations only came with cccam not with mgcamd. But with MGcamd i had freezes
sorry for late reply, but I was on work.
The problem happens on all decrypted channels, like ORF, HD+ and SKY
Because it´s a lot I posted the log on pastebin
https://pastebin.com/HxtxWMMA (https://pastebin.com/HxtxWMMA)
From 21:55:08 to 21:58:40 I cutted a lot.
Here is the full log
https://pastebin.com/XUWD7eUk
On 21:58:45 you can see stopping the cam. It was not initiated from me
-
Now I changed some things on mg_cfg. especially "keep ecm cache, seconds". I´ll take a look and report if this fix my problem
-
Ok, so after testing several hours, I can say. It works.
this is my mg_cfg
I changed following options:
- BoxType to 06
- keep ecm cache, secons to 15
- and cache option, sum of to 04
My Hardware: Xtrend ET 10000
http://xtrend-home.de/forum/index.php (http://xtrend-home.de/forum/index.php)
My OS is: HD Freaks 6.2
http://www.hdfreaks.cc (http://www.hdfreaks.cc)
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 02 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 360 3600
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 60 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 02 } root password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 31 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
-
OK, good. Can you summarize all you told before and create a new topic re: Xtrend ET 10000 receiver here https://www.cardsharing.cc/index.php?board=58.0 ? It would be helpful for other users with Xtrend ET 10000. Thank you
-
Of course I can. But I´ll do it after my vacation next week.
-
Of course I can. But I´ll do it after my vacation next week.
OK, thank you
-
Hi,
so after vacation I got same problems as before. With my settings I get freezes all the time. Sometimes after seconds and sometimes after minutes. I looked into the logs and can´t see anything what´s going wrong. At the moment i´m playing with mg_cfg. But for now I dont have a solution.
Its very arduous, because I could not replicate the error. And everytime I change settings, I have to wait a couple of minutes if the problem occurs.
regards
-
So, try to find any support forum for Xtrend ET 10000 and, maybe, you will find solution there
-
Now I got the error messges.
What does this mean?
[mg0] newcamd route server_XX:XXX27 cant decode (37ms)
[mg0] network can't decode
[mg0] pid 0x1AD0 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1BD0 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1DD0 failed to decode.
[mg0] network can't decode
[mg0] pid 0x1DD1 failed to decode.
-
https://www.cardsharing.cc/index.php?topic=32632.msg107971#msg107971
-
Hi, ok, the problems does not belongs to my receiver, because the problem is that the receiver did not get the keys from the server. I thought one option is to cache the keys, but I think that does not work. If the receiver is the problem, I never get keys. But most of the time I get the keys.
-
receiver did not get the keys from the server. ...But most of the time I get the keys.
Paradox - receiver did not get the keys and, on the other hand, most of time you get the keys. How shall we understand that? It is impossible not to get the keys and get the keys at the same time. Either, you get the keys OR not.
Consult support forums of your receiver and you will get the answer to all your questions.
One thing I want to say - there is no problem on the server. Everything depends on your receiver firmware, config files, emulator settings, internet (ping and route to the server).
Coming back to your first post, I will ask again - did you take a free test before buying full subscription? I think - no. Everybody thinks that he will be able to watch TV without changing settings of his receiver. No. CS settings need fine adjustment and some knowledge.
-
Ok, once again. I bought the line 2 years ago. There was no problems. Maybe the problem denpends on firmware. But on my receiver Forum i did not get help, because they said consult your c-line trader. And if you read my previous post i said sometimes i got keys and sometimes not. I dont know how easier i can explain. My english isnt very well. I cant explain my problem better. On Afternoon i´ll try other firmware images, maybe it will help.
-
Try this https://www.cardsharing.cc/index.php?topic=30684.msg104270#msg104270 maybe it will help this time
-
Hi,
now I tried 3 different receivers with different firmwares , several softcams, for example oscam, mgcamd 1.35-1.38, cccam2.3, with necamd and cccamd protocoll and always the same problem. I think you cant help me. But thank you for your engagement. At this point I give up.
-
Hey Suma,
i know now what the problem was. Indeed it was my problem. Because my bandwith (upload) was full.
-
Please read Rule #3 from https://www.cardsharing.cc/index.php?topic=32619.msg107890#msg107890
It's one of the most frequent problems faced by our clients. Line (internet) shall be clear, not occupied by other "internet-eating" software...