Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Configs => Тема начата: rubarb007 от 08 Января 2013, 02:39:43
-
Hi,
For past two years I have had a DM800 clone which I have used to connect but the clones have proven to be unreliable so I have purchased a genuine DM500HD. I have installed mgcamd 1.35a on it and inserted my CWS etc as I have always done but all encoded channels are not being shown :( I can view free to air channels though. The following is from 3syslog and I hope shows something meaningful?
Jan 07 22:26:49 192.168.0.18 [mg0] <- CW from newcamd xxxxxx:xxxxx (126ms)
Jan 07 22:26:49 192.168.0.18 [mg0] 126 msec -- Mon Jan 7 22:31:42 2013
Jan 07 22:26:49 192.168.0.18 system: NDS caid: 0x0963 pid: 0x0508
Jan 07 22:26:49 192.168.0.18 prov: 000000
Jan 07 22:26:49 192.168.0.18 cw0:0 D9 9B F5 69 57 5D B5 69
Jan 07 22:26:49 192.168.0.18 cw1:0 0D 3C A8 F1 17 14 5F 8A
Jan 07 22:26:55 192.168.0.18 [mg0] stoping camd..
Jan 07 22:26:56 192.168.0.18 got 147 cmd 9F
Jan 07 22:26:56 192.168.0.18 [mg0] namespace 11A0000 t-id 7D7 on-id 2
Jan 07 22:26:56 192.168.0.18 [mg0] descramble on 1, source 0
Jan 07 22:26:56 192.168.0.18 [mg0] service 10CF index 0 pmt pid 101 (2), pids: video 0x0206, audio 0x029A 0x02AE 0x0286 0x0902
Jan 07 22:26:56 192.168.0.18 CaPID: 0x0501 ProvID: 000000
Jan 07 22:26:56 192.168.0.18 CaPID: 0x0501 ProvID: 000000
Jan 07 22:26:56 192.168.0.18 CaPID: 0x0501 ProvID: 000000
Jan 07 22:26:56 192.168.0.18 ECM to newcamd xxxxxx:xxxxx
Jan 07 22:26:56 192.168.0.18 [mg0] <- CW from newcamd xxxxxxx:xxxxx (69ms)
Jan 07 22:26:56 192.168.0.18 [mg0] 69 msec -- Mon Jan 7 22:31:49 2013
Jan 07 22:26:56 192.168.0.18 system: NDS caid: 0x0963 pid: 0x0501
Jan 07 22:26:56 192.168.0.18 prov: 000000
Jan 07 22:26:56 192.168.0.18 cw0:0 00 00 00 00 00 00 00 00
Jan 07 22:26:56 192.168.0.18 cw1:0 9E 22 4A 0A BA A8 30 92
-
I think I have more usable log information here with clear errors. Can anyone explain what these errors are caused by please? I am doing exactly as I have done on my DM800 in the past (I am actually using the same files that I copied off the DM800 unit from var/keys directory?)
Jan 07 22:46:06 192.168.0.18 tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
Jan 07 22:46:06 192.168.0.18 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.0.5:514 Reread:0
Jan 07 22:46:06 192.168.0.18 [mg] Ecm cache time: 15
Jan 07 22:46:06 192.168.0.18 Box type: dbox2
Jan 07 22:46:06 192.168.0.18 Conax.Key error 2: No such file or directory
Jan 07 22:46:06 192.168.0.18 SoftCam.Key error 2: No such file or directory
Jan 07 22:46:06 192.168.0.18 AutoRoll.Key error 2: No such file or directory
Jan 07 22:46:06 192.168.0.18 Conax.Key error 2: No such file or directory
Jan 07 22:46:07 192.168.0.18 [config] newcamd route = username:server:port server cardserv
Jan 07 22:46:07 192.168.0.18 newcamd keep alive: 600, incoming port: 0
Jan 07 22:46:07 192.168.0.18 [mgcam] emm thread started
Jan 07 22:46:07 192.168.0.18 [newcamd] Connecting to server:xxxxx...
Jan 07 22:46:07 192.168.0.18 got 122 cmd 9F
Jan 07 22:46:07 192.168.0.18 [mg0] namespace 11A0000 t-id 7E8 on-id 2
Jan 07 22:46:07 192.168.0.18 [mg0] descramble on 1, source 0
Jan 07 22:46:07 192.168.0.18 [mg0] service EEB index 0 pmt pid 103 (1), pids: video 0x0201, audio 0x0281 0x0295 0x0907
Jan 07 22:46:07 192.168.0.18 CaPID: 0x0503 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 CaPID: 0x0503 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 CaPID: 0x0503 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 [mg0] network can't decode
Jan 07 22:46:07 192.168.0.18 [mg0] pid 0x0503 failed to decode.
Jan 07 22:46:07 192.168.0.18 [newcamd] Login to server:xxxxx as username accepted (23ms)
Jan 07 22:46:07 192.168.0.18 [newcamd] Card data from server:xxxxx(46ms):
Jan 07 22:46:07 192.168.0.18 Userid 15 caid 963 providers 1
Jan 07 22:46:07 192.168.0.18 Idents: 000000
Jan 07 22:46:07 192.168.0.18
Jan 07 22:46:07 192.168.0.18 [mg0] network can't decode
Jan 07 22:46:07 192.168.0.18 [mg0] pid 0x0503 failed to decode.
Jan 07 22:46:07 192.168.0.18 [mg0] network can't decode
Jan 07 22:46:07 192.168.0.18 [mg0] pid 0x0503 failed to decode.
Jan 07 22:46:07 192.168.0.18 [mgcamd] emm started
Jan 07 22:46:07 192.168.0.18 CaPID: 0x00C0 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 CaPID: 0x00C0 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 CaPID: 0x00C0 ProvID: 000000
Jan 07 22:46:07 192.168.0.18 [mgcamd] emm stopped
-
Delete Softcam.key, Conax.Key, if any, and restart emulator
Moreover, you need no copy and past your files used with DM800 before. We do not know if you were using softcam.key or not
For this, you need to use OUR settings files provided here http://www.cardsharing.cc/index.php?topic=28611.0
-
Hi Suma,
I used your settings provided in the link, but still got that issue.
Here is an update. I installed the Domica image, and i managed to get the service working (mgcamd) however, the domica image seems to have issues with HDD on the DM500HD as it was not detecting my hard drive. Therefore I have had to install OpenPli again. I have copied the same mg_cfg and newcamd.list files that were working in Domica to the OpenPli usr/key folder and its not working :(
Surely your service is not dependant on using a certain image? I don't understand how those files worked on Domica, but don't work on OpenPli using the same version of mgcamd?
Any other help would be appreciated as I am not sure what to do.
-
Hi,
It's a mystery: Domica is working but does not see your HDD. OpenPli is not working but detects your HDD.
Well, I think, you have to learn Domica deeper. Must work. I have DM800se HD PVR and 250Gb HDD, Domica is installed and detects HDD correctly.
Are you using this image http://www.domica.biz/index.php?topic=11069.0 ? It's the latest one.