Кардшаринг НТВ+ на cardsharing .cc - самый надёжный и стабильный шаринг!
CardSharing Server ENG => Configs => MgCamd (newcamd 5.25) => Тема начата: yp от 07 Сентября 2013, 16:59:07
-
Hello all,
I have an old set of configs for my Dreabox 500S. It used to work with MgCamd 1.30 and Newcamd 6.10. I tried to get a test line from here and added it to my newcamd file but it doesnt work. Do you see anything wrong in my setup below?
The relevant log follows (after trying to tune to BT Sport 1).
root@dreambox:/var/keys> [mgcam] emm thread started
[mgcamd] tps update started.
[newcamd] Connecting to serv5:59097...
[newcamd] Login to serv5:59097 as 9734528 accepted (59ms)
[newcamd] Card data from serv5:59097 (157ms):
Userid 14 caid 963 providers 1
Idents: 000000
got 8 cmd 9F
got 113 cmd 9F
[newcamd-v6.10 13:50:01] stop decoding servid 13f4, pmt 0107.
[mg0] namespace 11A0000 t-id 964 on-id 2
[mg0] descramble on 1, source 0
[mg0] service C4BE index 0 pmt pid 11B (2)
[newcamd-v6.10 13:50:01] start decoding servid c4be, pmt 011b.
[newcamd-v6.10 13:50:01] can't decode
ECM: CaID: 0x0961 -> CaPID: 0x0505 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0505 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0960 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0961 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0963 -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
My mg_cfg file is:
root@dreambox:/var/keys> cat mg_cfg
M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 00 } username password
S: { 03 } 80
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
The test line is in my newcamd.list:
root@dreambox:/var/keys> cat newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = serv5 59097 9734528 0148095 01 02 03 04 05 06 07 08 09 10 11 12 13 14
And the output of my ps command is:
root@dreambox:/var/keys> ps -ax
PID Uid VmSize Stat Command
1 root 544 S init
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kblockd/0]
6 root SW [pdflush]
7 root SW [pdflush]
9 root SW< [aio/0]
8 root SW [kswapd0]
10 root SW [cifsoplockd]
11 root SW [cifsdnotifyd]
12 root SW [mtdblockd]
14 root 544 S init
15 root 552 S /bin/sh /etc/init.d/rcS
23 root SW< [fe_thread]
32 root SWN [jffs2_gcd_mtd1]
57 root 592 S /sbin/inetd
75 root 608 S /sbin/dropbear
146 root 736 S /bin/gdaemon
147 root 12024 S /bin/enigma
148 root 12024 S N /bin/enigma
155 root 12024 S /bin/enigma
156 root 12024 S N /bin/enigma
173 root 12024 S /bin/enigma
210 root 12024 S N /bin/enigma
228 root 412 S telnetd
229 root 808 S -sh
249 root 956 S newcamd_6.10b
266 root 1208 S mgcamd_1.30 -v
267 root 1208 S mgcamd_1.30 -v
268 root 1208 S mgcamd_1.30 -v
271 root 1208 S mgcamd_1.30 -v
273 root 1164 S mgcamd_1.30 -v
274 root 1164 S mgcamd_1.30 -v
275 root 1164 S mgcamd_1.30 -v
277 root 1164 S mgcamd_1.30 -v
278 root 1164 S mgcamd_1.30 -v
279 root 1164 S mgcamd_1.30 -v
282 root 640 R ps -ax
-
Hi
Download and install mgcamd_1.35a
http://www.cardsharing.cc/index.php?action=dlattach;topic=29088.0;attach=1848
-
Hello,
Thanks for your message. I tried to install mgcamd 1.35 as you suggested but I still cant see anything on BT Sport 1. Is there anything else I m doing wrong?
I get the following mgcamd log now:
root@dreambox:/var/keys> mgcamd_1.35a
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 21:33:33)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:1 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:4
[mg] Ecm cache time: 15
Box type: dreambox
/dev/dvb/card0/ca0 error 16: Device or resource busy
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = 3297038:serv5:49868
newcamd keep alive: 300, incoming port: 12000
network port 12000 open: bind error 98: Address already in use
root@dreambox:/var/keys> [mgcam] emm thread started
[newcamd] Connecting to serv5:49868...
[newcamd] Login to serv5:49868 as 3297038 accepted (52ms)
[newcamd] Card data from serv5:49868 (103ms):
Userid 14 caid 963 providers 1
Idents: 000000
got 113 cmd 9F
[mg0] namespace 11A0000 t-id 964 on-id 2
[mg0] descramble on 1, source 0
[mg0] service C4C8 index 0 pmt pid 105 (1), pids: video 0x0901, audio 0x0902 0x0903 0x0904
[mg0] ECM: CaID: 0x0960 -> CaPID: 0x0504 ProvID: 000000
[mg0] ECM: CaID: 0x0961 -> CaPID: 0x0504 ProvID: 000000
[mg0] ECM: CaID: 0x0963 -> CaPID: 0x0504 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mg0] -> ECM to newcamd serv5:49868
[mg0] network can't decode
[mg0] pid 0x0504 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0960 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0961 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0963 -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] stoping camd..
/dev/dvb/card0/ca0 error 16: Device or resource busy
/dev/dvb/card0/ca0 error 16: Device or resource busy
[mg0] stopped
got 138 cmd 9F
[mg0] namespace 11A0000 t-id 7E5 on-id 2
[mg0] descramble on 1, source 0
[mg0] service 1070 index 0 pmt pid 100 (7), pids: video 0x0204, audio 0x0298 0x0284 0x0244
[mg0] ECM: CaID: 0x0963 -> CaPID: 0x0514 ProvID: 000000
[mg0] ECM: CaID: 0x0961 -> CaPID: 0x0514 ProvID: 000000
[mg0] ECM: CaID: 0x0960 -> CaPID: 0x0514 ProvID: 000000
[mg0] -> ECM to newcamd serv5:49868
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0514 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0960 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0961 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0963 -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[newcamd] no answer from serv5:49868 for last 5 messages
[newcamd] Connecting to serv5:49868...
[newcamd] Login to serv5:49868 as 3297038 accepted (53ms)
[newcamd] Card data from serv5:49868 (105ms):
Userid 14 caid 963 providers 1
Idents: 000000
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
[mg0] -> ECM to newcamd serv5:49868
-
Free test
Channel name:Disc. History
Frequency: 11876H 27500 2/3 DVB-S
-
Sorry what does that mean?
-
Got it! Thanks!